ETFV14K230E2 Datasheet PDF - EPCOS
| Part Number | ETFV14K230E2 | |
| Description | SIOV metal oxide varistors | |
| Manufacturers | EPCOS | |
| Logo |  |
|
|
There is a preview and ETFV14K230E2 download ( pdf file ) link at the bottom of this page. Total 15 Pages | ||
Preview 1 page No Preview Available !
SIOV metal oxide varistors
Housed (ThermoFuse) varistors, AdvanceD series
Series/Type:
Date:
ETFV14
April 2011
© EPCOS AG 2011. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
|
| |
 
Housed varistors
ThermoFuse varistors, ETFV14 series
ETFV14
Reliability data
Test
Varistor voltage
Clamping voltage
Endurance at upper
category temperature
Surge current derating,
8/20 µs
Surge current derating,
2 ms
Electric strength
Test methods/conditions
Requirement
The voltage between two terminals with To meet the specified value
the specified measuring current applied
is called VV (1 mADC @ 0.2 ... 2 s).
The maximum voltage between two To meet the specified value
terminals with the specified standard
impulse current (8/20 µs) applied.
1000 h at UCT
|∆V/V (1 mA)| ≤10%
After having continuously applied the
maximum allowable AC voltage at UCT
±2 °C for 1000 h, the specimen shall be
stored at room temperature and normal
humidity for 1 to 2 h.
Thereafter, the change of VV shall be
measured.
10 surge currents (8/20 µs), unipolar, |∆V/V (1 mA)| ≤10%
interval 30 s, amplitude corresponding (measured in direction of
to derating curve for 10 impulses at
20 µs
surge current)
No visible damage
10 surge currents (2 ms), unipolar,
|∆V/V (1 mA)| ≤10%
interval 120 s, amplitude corresponding (measured in direction of
to derating curve for 10 impulses at
surge current)
2 ms
No visible damage
IEC 61051-1, test 4.9.2
No breakdown
Metal balls method, 2500 VRMS, 60 s
The varistor is placed in a container
holding 1.6 ±0.2 mm diameter metal
balls such that only the terminations of
the varistor are protruding.
The specified voltage shall be applied
between both terminals of the specimen
connected together and the electrode
inserted between the metal balls.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 15
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for ETFV14K230E2 electronic component. |
| Information | Total 15 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ ETFV14K230E2.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| ETFV14K230E2 | The function is SIOV metal oxide varistors. EPCOS | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
ETFV
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||