|
|
|
부품번호 | ETFV14K300E2 기능 |
|
|
기능 | SIOV metal oxide varistors | ||
제조업체 | EPCOS | ||
로고 | |||
전체 15 페이지수
SIOV metal oxide varistors
Housed (ThermoFuse) varistors, AdvanceD series
Series/Type:
Date:
ETFV14
April 2011
© EPCOS AG 2011. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Housed varistors
ThermoFuse varistors, ETFV14 series
ETFV14
Dimensional drawings
Weight
Nominal diameter
mm
14
VRMS
V
130 ... 420
Weight
g
4.0 ... 5.6
Lead configuration
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 15
4페이지 Housed varistors
ThermoFuse varistors, ETFV14 series
ETFV14
Test
Solderability
Resistance to soldering
heat
Tensile strength
Test methods/conditions
Requirement
IEC 60068-2-20, test Ta,
The inspection shall be
method 1 with modified conditions for carried out under adequate
lead-free solder alloys: 245 °C, 3 s:
light with normal eyesight or
with the assistance of a
After dipping the terminals to a depth of magnifier capable of giving
approximately 3 mm from the body in a a magnification of 4 to
soldering bath of 245 °C for 3 s, the
10 times. The dipped
terminals shall be visually examined. surface shall be covered
with a smooth and bright
solder coating with no more
than small amounts of
scattered imperfections
such as pinholes or
un-wetted or de-wetted
areas. These imperfections
shall not be concentrated in
one area.
IEC 60068-2-20, test Tb, method 1A, |∆V/V (1 mA)| ≤5%
260 °C, 10 s:
No visible damage
Each lead shall be dipped into a solder
bath having a temperature of 260 ±5 °C
to a point 2.0 to 2.5 mm from the body
of the specimen, be held there for
10 ±1 s and then be stored at room
temperature and normal humidity for
1 to 2 h.
The change of VV shall be measured
and the specimen shall be visually
examined.
IEC 60068-2-21, test Ua1
|∆V/V (1 mA)| ≤5%
After gradually applying the force
specified below and keeping the unit
fixed for 10 s, the terminal shall be
visually examined for any damage.
No break of solder joint,
no wire break
Force for wire diameter:
0.6 mm = 10 N
0.8 mm = 10 N
1.0 mm = 20 N
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 15
7페이지 | |||
구 성 | 총 15 페이지수 | ||
다운로드 | [ ETFV14K300E2.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
ETFV14K300E2 | SIOV metal oxide varistors | EPCOS |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |