Datasheet.kr   

ZICM2410P2-1C 데이터시트 PDF




CEL에서 제조한 전자 부품 ZICM2410P2-1C은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 ZICM2410P2-1C 자료 제공

부품번호 ZICM2410P2-1C 기능
기능 Module and Extended Range Module
제조업체 CEL
로고 CEL 로고


ZICM2410P2-1C 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 16 페이지수

미리보기를 사용할 수 없습니다

ZICM2410P2-1C 데이터시트, 핀배열, 회로
DATA SHEET
MeshConnect™ Module Series
Module and Extended Range Module
Integrated Transceiver Modules for ZigBee / IEEE 802.15.4
Development Kits available: ZICM2410P0-KIT2-1, ZICM2410P2-KIT1-1
DESCRIPTION
CEL's MeshConnect™ Module Series provides high performance
and low cost 2.4 GHz IEEE 802.15.4 / ZigBee modules for a broad
range of wireless networks. The MeshConnect certified and quali-
fied modules, enable customer to accelerate time to market by
greatly reducing design and certification phases of development.
CEL's MeshConnect™ radio modules leverage the advanced
features of the MeshConnect™ Integrated Circuit (IC). The IC is
a true single-chip solution, compliant with ZigBee specifications
and IEEE 802.15.4, a complete wireless solution for all ZigBee
applications. The IC consists of an RF transceiver with baseband
modem, a hardwired MAC and an embedded 8051 microcon-
troller with internal Flash memory. The device provides numerous
general-purpose I/O pins, peripheral functions such as timers and
UARTs and is one of the first devices to provide an embedded
Voice CODEC. This device is also ideal for low power applications.
The original MeshConnect module delivers excellent performance
at a surprisingly low cost. The module’s +6dBm output power
means better range, more reliable transmission and fewer nodes
in your network. It also makes these modules ideal for applica-
tions where cost and power constraints do not allow for external
power amplifiers or peripheral range extension components.
The MeshConnect Extended Range module adds a power ampli-
fier (PA) and low noise amplifier (LNA) to increase range to over
two miles - plus more reliable transmission and fewer nodes in
your network. It is especially useful for open outdoor applica-
tions where the nodes are physically far apart, or for indoor use
where the nodes have to operate in a noisy RF environment. The
Extended Range Module’s outstanding +123 dBm budget link
ensures high quality connections even in such harsh environments.
ORDERING INFORMATION
MeshConnectModule Series
FEATURES
• 96 kB FLASH Memory
• 8 kB SRAM
• 8051 MCU core
• up to 22 GPIO Pins
• SPI (Master/Slave) + UARTs
• I2S/PCM Interface with two 128-byte FIFOs
• µ-law/a-law/ADPCM Voice Codec
• 4-channel 8-bit ADC
• High RF performance:
- Up to 123.5 dB RF Link Budget
- RX Sensitivity: -97 dBm and -103.5 dBm
- RF TX Power:+6 dBm and +20 dBm
• Scalable Data Rate: 250 kbps, 500 kbps and 1Mbps
• Miniature footprint: 1” x 1.350” (25.4 mm x 34.3 mm)
• Voice Codec Support: µ-law/a-law/ADPCM
• 4 Level Power Management Scheme w/ Deep Sleep Mode (0.3 µA)
• Integrated PCB trace antenna
• 16 RF channels
• Up to 12,000 feet of range
• AES 128-bit encryption
• FCC, CE and IC certifications
• ROHS compliant
APPLICATIONS
Industrial Controls
• Food processing controls
• Traffic Management
• Sensor Networks
• Asset Management
• Barcode reader
• Patient Monitoring
• Glucose monitor
Home &
Building Automation
• Security
• HVAC control
• Lighting control
• Thermostats
Part Number
MeshConnect™
Module
MeshConnect™
Extended Range Module
Order Number
ZICM2410P0-1
ZICM2410P0-1-SN
ZICM2410P0-1C
ZICM2410P0-1C-SN
ZICM2410P0-KIT2-1
ZICM2410P2-1
ZICM2410P2-1-SN
ZICM2410P2-1C
ZICM2410P2-1C-SN
ZICM2410P2-KIT1-1
Description
+6 dBm Output power, PCB Trace antenna
+6 dBm Output power, PCB Trace antenna, SNAP software
+6 dBm Output power, with u.FL Connector for external antenna
+6 dBm Output power, with u.FL Connector for external antenna, SNAP software
+6 dBm Engineering Development Kit
+20 dBm Output power, PCB Trace antenna
+20 dBm Output power, PCB Trace antenna, SNAP software
+20 dBm Output power, with u.FL Connector for external antenna
+20 dBm Output power, with u.FL Connector for external antenna, SNAP software
Evaluation board for +20 dBm module
The information in this document is subject to change without notice, please confirm data is current
Document No: 0007-00-07-00-000 (Issue C)
Date Published: April 7, 2010
Page 1




ZICM2410P2-1C pdf, 반도체, 판매, 대치품
MeshConnect™ Module Series
TRANSCEIVER IC
A true monolithic solution, the MeshConnect IC incorporates the RF transceiver with baseband modem, a hardwired MAC,
and an embedded 8051 microcontroller, offering an excellent low cost high performance solution for all IEEE 802.15.4 /
ZigBee applications.
PS/2
UART/2
SPI
WDT
GPIO/24
Timer/4
PWM/2
Quad
Key Scan
Digital
Regulator
ADPCM
Voice
FIFFO
a-law
μ-law
DMA
MCU
(8051)
RC Clock
Oscillator PLL
MAC
AES
Engine
MODEM
FLASH
96KB
DATA
8KB
ROM
POR
3V
Ciruitry
RF TX
RF RX
PLL
Temp.
Sensor
Bat
Monitor
ADC
(4CH)
Analog
Regulator
With an industry best +8 dBm output power, the MeshConnect IC will support a wide a variety of applications without the
need for external amplification. Combined with a highly sensitive -98 dBm receiver the MeshConnect IC leads the industry
with 106 dB link budget.
In addition to excellent RF performance at ZigBee (250 kbps) data rates, the IC adds high speed modes, Turbo (500 kbps)
and Premium (1 Mbps), for networks looking for increased throughput. The device provides numerous general-purpose I/O
pins, peripheral functions such as timers and UARTs and is one of the first devices to provide an embedded Voice CODEC.
CEL provides its customers with the CEL ZigBee Stack as part of the software library. Also available are the hardware &
software tools required to develop custom applications.
The combination of industry leading link budget, high speed RF, and integrate voice CODEC make the IC a truly distinct
single chip solution.
The Extended Range module adds both an PA and LNA to maximize RF performance. The NEC uPG2250 PA enable the
Extended Range module to output up to +20 dBm transmit power. In the receive path the addition of the UPC8233 LNA
boosts the already sensitive receiver up to -103.5 dBm. The Extended Range link budget boasts a very robust 123.5 dBm
enabling a line of sight range over 2 miles.
Page 4

4페이지










ZICM2410P2-1C 전자부품, 판매, 대치품
MeshConnect™ Module Series
SOFTWARE TOOLS (Continued)
DEVICE PROGRAMMER
Device Programmer is used to program the application firmware to the on-chip Flash program memory of the
IC device.
• Device Programmer supports:
• ISP Mode: Download the firmware from the host PC via serial communication through the IC’s
UART1 interface.
• The evaluation boards utilize a USB -> Serial converter.
• OTA Mode: Download the firmware from the host PC using wireless communication (Over-The-Air).
• This requires two nodes, the host (connected to a PC) and the target device to be programmed.
Device Programmer can read / write hardware information (i.e. IEEE Address, Channel #, etc) directly via the
aforementioned communication modes.
PROFILE SIMULATOR
Profile Simulator is used to simulate and test a ZigBee network consisting of a coordinator, router and / or end devices.
• Profile Simulator includes:
• Device Manager: Setting parameters of a ZigBee node.
• Bind Manager: Managing “bindings” in a ZigBee network.
• ZStack manager: Setting parameters of a ZigBee network.
• ZigBee Device Wizard: Selects network configuration during ZigBee network formation.
Can be used to generate ZigBee standard primitive functions for MAC, NWK and APS layers and the ZDO and APP.
PACKET ANALYZER AND WIRELESS NETWORK ANALYZER
Packet Analyzer monitors traffic over a wireless network channel by capturing RF packet data in real-time.
• Packet Analyzer requires the Wireless Network Analyzer to “sniff” the RF packets.
• Packet Analyzer also includes diagnostic tools:
• Energy Scan: Evaluates the received signal power within the bandwidth of an IEEE 802.15.4 channel
yielding available channels.
• Active Scan: Scanning for active Coordinators and Routers broadcasting a Beacon frame.
• Packet Analyzer is capable of displaying network configuration (i.e. tree vs. star), network nodes, packet details, etc.
• Can be used in conjunction with any IEEE 802.15.4 or ZigBee network.
KEIL 8051 DEVELOPMENT TOOLS (Evaluation version provided in development kit).
Supports all 8051 derivatives and variants.
• Easy-to-Use µVision Integrated Development Environment (IDE) supports the complete development cycle.
• Supports memory banking for CODE and variables beyond the 64 kbyte threshold.
Numerous optimization levels yield the ability to place more features into less memory providing the utmost code density.
Page 7

7페이지


구       성 총 16 페이지수
다운로드[ ZICM2410P2-1C.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
ZICM2410P2-1

Module and Extended Range Module

CEL
CEL
ZICM2410P2-1-SN

Module and Extended Range Module

CEL
CEL

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵