|
|
|
부품번호 | HST-0041SAR 기능 |
|
|
기능 | 10/100Base-T TRANSFORMER | ||
제조업체 | ETC | ||
로고 | |||
RoHS
承认书
SPECIFICATION FOR APPROVAL
客户名称
CUSTOMER
客户料号
MODEL NO
产品名称
PART NAME
产品型号
PART TYPE
版本
REV
签名
SIGNATURE
10/100Base-T TRANSFORMER
HST-0041SAR
A1
制 图:
DRAWING BY
审 核:
CHECKED BY
批 准:
APPROVED BY
客户承认
CUSTOMER APPROVAL
承认印:
SIGNET
签 名:
SIGNATURE
1 of 5
HST-0041SAR
ts
1. Recommended Lead Free IR Reflow Soldering Curve
Recommended Lead Free IR Reflow Curve
℃
30s max.
260℃ max.
230℃
Natural
cooling
3℃/s max.
200℃
150℃
Item
25℃
Soldertechnique
simulation
2℃/s
90s max.
120s max.
80s max.
1 to 2℃/s
time,second
Temperature
(℃)
Time(s)
Temperature ramp/immersion
and emersion rate
1
Solder iron
350±10
(solder irno temp)
4~5
2
Vapor phase reflow
215±5
(vapor temp)
60±5
3
IR/convection
reflow
255±5
(component temp)
30±5
1℃/s~4℃/s time above 183
℃ 90s~120s
* The curve includes recommended value only, please adjust your equipment
to make sure the solder process.Details please refers to the standard J-STD-020.
2. Reliability Test Criteria.
2.1 Operating temperature range: 0℃ to 70℃
2.2 Terminal strength: Pull test withstand 9.8N 60+/-0.5S no looseness or movement.
2.3 Solderbility: Dipped in 245℃+/-5℃ molten solder for 3+/-0.5 seconds,95% min shall be
smooth any and bright
2.4 Resistance to soldering heat : Convection reflow condition setting: peak temperature at 260℃+0/-5℃
above 217℃ for 90-180 seconds, ramp-up rate 2-3℃/s. Ramp-down rate 6℃/s Max.
No mechanical problem found. No electrical failure found per our specification.
2.5 Vibration: 1.5mm amplitude total excursion 10-55-10 Hz traversed in 1minute, x.y.z, axis for 2
hours. Shall not be any abnormality.
2.6 Random drop (Packing condition): Height 60cm, 3 times on the wood floorboard ,shall not be
any abnormality.
2.7 Dry heat: 100+/-2℃ 96 hours.
2.8 Cold: -20+/-2℃ 96 hours.
2.9 Damp Heat: 60+/-2℃, 93+/-3% RH 96 hours.
2.10 Change of temperature: exposed 5 cycle; each consisting of 30 minutes at -20+/-2℃,2-3
minutes at 20+/-2℃,30 minutes at 85+/-2℃, 2-3 minutes at 20+/-2℃.
Remarks: After reliability test per item 7,8,9,10 in prior to the test as specified, the transformer / coil
would be exposed to the room temperature for 1-2 hours,the component meets all
requirements according to this specification.
4 of 5
4페이지 | |||
구 성 | 총 6 페이지수 | ||
다운로드 | [ HST-0041SAR.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
HST-0041SAR | 10/100Base-T TRANSFORMER | ETC |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |