Datasheet.kr   

IB0503LS-1W 데이터시트 PDF




MORNSUN에서 제조한 전자 부품 IB0503LS-1W은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 IB0503LS-1W 자료 제공

부품번호 IB0503LS-1W 기능
기능 ISOLATED & REGULATED SINGLE OUTPUT DC-DC CONVERTER
제조업체 MORNSUN
로고 MORNSUN 로고


IB0503LS-1W 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 4 페이지수

미리보기를 사용할 수 없습니다

IB0503LS-1W 데이터시트, 핀배열, 회로
IB_LD-1W & IB_LS-1W Series
1W, FIXED INPUT, ISOLATED & REGULATED
SINGLE OUTPUT DC-DC CONVERTER
FEATURES
l Small Footprint
l SIP/DIP Package
l 1KVDC Isolation
l Temperature Range: -40°C to +85°C
l No Heat sink Required
l Internal SMD Construction
l No External Component Required
l Industry Standard Pinout
l RoHS Compliance
Patent Protection RoHS
MODEL SELECTION
Rated Power
Package Style
Output Voltage
Input Voltage
Product Series
PRODUCT PROGRAM
Model
Input Voltage
(VDC)
Nominal
Range
IB0505LD-1W
IB0512LD-1W
IB0515LD-1W
IB0503LS-1W
IB0505LS-1W
IB0509LS-1W
IB0512LS-1W
5
4.75-5.25
IB0515LS-1W
IB0524LS-1W
IB1205LD-1W
IB1209LD-1W
IB1212LD-1W
B1215LD-1W
IB1205LS-1W
IB1209LS-1W
12
11.4-12.6
IB1212LS-1W
IB1215LS-1W
IB1224LS-1W
IB1505LS-1W
IB1515LS-1W 15 14.25-15.75
IB1524LS-1W
APPLICATIONS
The IB_LD-1W & IB_LS-1W Series are specially designed
for applications where a group of polar power supplies are
isolated from the input power supply in a distributed power
supply system on a circuit board.
These products apply to:
1) Where the voltage of the input power supply is fixed
(voltage variation ≤±5%);
2) Where isolation is necessary between input and output
(isolation voltage 1000VDC);
3) Where the regulation of the output voltage and the output
ripple noise are demanded.
Output Voltage
(VDC)
5
12
15
3.3
5
9
12
15
24
5
9
12
15
5
9
12
15
24
5
15
24
Output Current
(mA)
Max.
Min.
200 20
83 9
67 7
303 3
200 20
111 12
83 9
67 7
42 5
200 20
111 12
83 9
67 7
200 20
111 12
83 9
67 7
42 5
200 20
67 7
42 5
Input Current
(mA)(Typ.)
@Max.
Load
@No
Load
299
278
274
333
299 30
286
282
274
294
124
116
119
113
124 15
116
119
113
123
100
93 15
98
Efficiency(%)
@Max. Load
Min. Typ.
63 67
68 72
69 73
56 60
63 67
66 70
67 71
69 73
64 68
63 67
68 72
66 70
70 74
63 67
68 72
66 70
70 74
64 68
63 67
68 72
64 68
The copyright and authority for the interpretation of the products are reserved by MORNSUN IB_LD-1W & IB_LS-1W 2013.11.21-B/2 Page 1 of 4




IB0503LS-1W pdf, 반도체, 판매, 대치품
APPLICATION NOTE
1)Requirement on output load
To ensure this module can operate efficiently and reliably, During operation, the minimum output load could not be less than 10% of the full load.
If the actual output power is very small, please connect a resistor with proper resistance at the output end in parallel to increase the load.
2)Recommended circuit
If you want to further decrease the input/output ripple, an LCfiltering network may be connected to the input and output ends of the DC/DC
converter, see (Figure 1).
L
Vin
L
+Vo
Cin
GND
DC DC
Cout
0V
(Figure 1)
It should also be noted that the inductance and the frequency of the LCfiltering network should be staggered with the DC/DC frequency to avoid
mutual interference. However, the capacitance of the output filter capacitor must be proper. If the capacitance is too big, a startup problem might
arise. For every channel of output, provided the safe and reliable operation is ensured, the greatest capacitance of its filter capacitor sees (Table 1).
EXTERNAL CAPACITOR TABLE (TABLE 1)
Vin
Cin
Vout
Cout
(VDC) (μF) (VDC) (μF)
5 4.7 3.3 / 5 10
12 4.7 9 4.7
15 2.2 12 2.2
24 1 15 1
-- -- 24 0.47
Its not recommend to connect any external capacitor in the application field with less than 0.5 watt output.
3)Overload Protection
Under normal operating conditions, the output circuit of these products has no protection against over-current and short-circuits. The simplest
method is to connect a self-recovery fuse in series at the input end or add a circuit breaker to the circuit.
4)Input Over-voltage Protection Circuit
The simplest device for input over-voltage protection is a linear voltage regulator with overheat protection that is connected to the input end in
series (Figure 2).
Vin
GND
REG
DC DC
(Figure 2)
+Vo
0V
5)When the environment temperature is higher than 71°C, the product output power should be less then 60% of the rated power.
6)It is not recommended to increase the output power capability by connecting two or more converters in parallel. The product is not
hot-swappable.
Note:
1. Operation under minimum load will not damage the converter; However, they may not meet all specifications.
2. Max. Capacitive Load is tested at nominal input voltage and full load.
3. Unless otherwise noted, All specifications are measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load.
4. In this datasheet, all test methods are based on our corporate standards.
5. All characteristics are for listed models, and non-standard models may perform differently. Please contact our technical support for more detail.
6. Please contact our technical support for any specific requirement.
7. Specifications of this product are subject to changes without prior notice.
MORNSUN Science & Technology Co.,Ltd.
Address: No. 5, Kehui St. 1, Kehui development center, Science Ave., Guangzhou Science City, Luogang district, Guangzhou,P.R.China.
Tel: 86-20-38601850
Fax:86-20-38601272
Http://www.mornsun-power.com
The copyright and authority for the interpretation of the products are reserved by MORNSUN IB_LD-1W & IB_LS-1W 2013.11.21-B/2 Page 4 of 4

4페이지












구       성 총 4 페이지수
다운로드[ IB0503LS-1W.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
IB0503LS-1W

ISOLATED & REGULATED SINGLE OUTPUT DC-DC CONVERTER

MORNSUN
MORNSUN

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵