Datasheet.kr   

6700 데이터시트 PDF




Sensata에서 제조한 전자 부품 6700은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 6700 자료 제공

부품번호 6700 기능
기능 Subminiature Bimetal Disc Thermostat
제조업체 Sensata
로고 Sensata 로고


6700 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 5 페이지수

미리보기를 사용할 수 없습니다

6700 데이터시트, 핀배열, 회로
6700 Series
TO-220, Subminiature Bimetal Disc Thermostat
FEATURES
• RoHS compliant per EU directive 2002 / 95 / EC
• TO-220 / Y-220 international electronic package standard
• Ideal for surface and air sensing on PC boards and heat sinks
• VDE approved with “P” bracket option
• Gold-plated contacts
• Up to 20,000 life cycles @ max standard amperage
• Up to 100,000 life cycles @ max gold contact amperage
DESCRIPTION
The Airpax™ 6700 series is a RoHS compliant, positive snap action, single pole / single throw, sub-miniature bimetallic thermostat
which provides accurate and reliable sensing and switching in a single device.
The 6700 series thermostat dimensionally conforms to the international product package standard Y220 / TO220. Thus, the 6700 may be
automatically placed and soldered onto PC boards with high speed automated equipment, eliminating the need for the expensive hand
placement and termination required today for most power supply thermostats.
The 6700 provides fast, positive response with excellent repeatability. The thermostat has a switch capability of up to 0.5 amp for 48
VDC, and achieves low-level switching down to 0.001A to 0.020A at 5 VDC for 100,000 cycles. Temperature is pre-set at the factory and
is non-adjustable in the field.
Thermal conductivity is mainly through the terminals and the mounting bracket making the unit ideal for both surface mount and
ambient air sensing. The nickel-plated copper mounting bracket comes standard, or you can utilize the laminated plastic mounting
bracket for increased dielectric strength and VDE approval.
Primarily developed for thermal management applications on power supplies, the Airpax™ 6700 series is also ideally suited for use
on crowded PC boards. Typical uses include turning on an indicator light, sounding an audible alarm, switch on a control circuit to
send a message to a display screen or even switching a circuit to shut down a system. Applications include computers and computer
peripherals, aircraft, automotive, medical devices and test equipment.
OPERATION SCHEMATICS
Schematic for
Open on Rise
Operation
37 6700 Series - Introduction
Schematic for
Close on Rise
Operation
http://airpax.sensata.com




6700 pdf, 반도체, 판매, 대치품
STANDARD TEMPERATURE CALIBRATION TABLE
Each thermostat part number consists of functional “building
blocks” to enable the user to specify the desired characteristics.
Select the proper code in each category, then transfer it to the
box indicated. Unless a special requirement is indicated, the part
number will be complete when the proper temperature is selected.
If you have a special requirement, please call Sensata for a factory
assigned number to complete the part number.
Example 1:
A 67F090 thermostat will close (make contact) on a rising
temperature from 85°C to 95°C and will reset open (break contact)
on a falling temperature within a window of no greater than 6°C
lower than the actual close temperature and no less than 60°C
ambient temperature.
Example 2:
A 67L060P thermostat has a plastic mounting bracket with 2000
VAC dielectric strength and VDE approval.The thermostat will open
(break contact) on a rising temperature from 55°C to 65°C and will
reset close (make contact) on a falling temperature within a window
of no greater than 4°C lower than the actual open temperature and
no less than 40°C ambient temperature.
The mounting bracket designation and the 4 digit manufacturing
dash number are used for ordering special features and may not
appear as part of the marking on the thermostat.
Temperature set point calibration is checked at Sensata
Technologies with precision test equipment and proven methods.
Because customer checking methods may differ, a typical variance
allowed for correlation is ±1°C.
OPERATE
(±5°C)
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
125
130
MIN DIFFERENTIAL MIN RESET
(°C) (°C)
4 20
4 20
4 30
4 30
4 40
4 40
4 50
4 50
6 55
6 55
6 60
6 60
6 70
6 70
6 80
6 80
9 85
9 85
9 90
DECISION TABLES
67 L 0 9 0
Basic Product Series
Contact Operation
F = Fan (close on rise)
L = Limit (open on rise)
Operating Temperature
in °C, 3 digits (from above table, put “0” in front of 2 digit temps)
Mounting Bracket Designation
Blank or no entry for a standard nickel-plated copper bracket
P = Plastic mounting bracket (VDE approved)
Factory Assigned Number
Nondescript, 4 digit dash number assigned for a
customer’s special requirements. The dash and
factory assigned number is not required for
ordering a standard product
P
5588
6700 Series - Decision Tables
40

4페이지












구       성 총 5 페이지수
다운로드[ 6700.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
6700

Subminiature Bimetal Disc Thermostat

Sensata
Sensata
6701

4-Bit Expandable Bipolar Microcontroller

MMI
MMI

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵