Datasheet.kr   

MN130S PDF 데이터시트 ( Data , Function )

부품번호 MN130S 기능
기능 silicon power transistor
제조업체 Sanken
로고 Sanken 로고 



전체 6 페이지

		

No Preview Available !

MN130S 데이터시트, 핀배열, 회로
1.
Scope
MN130S
The present specifications shall apply to Sanken silicon power transistor type MN130S.
2. ( 25 )
Absolute Maximum Ratings (Ta=25 )
Characteristic
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Collector Current
Base Current
Collector Power Dissipation
Junction Temperature
Storage Temperature
Symbol
VCBO
VCEO
VEBO
IC
IB
PC
Tj
Tstg
Rating
200
140
6
10
4
130 (Tc=25 )
150
-55 150
Unit
V
V
V
A
A
W
3. ( 25 )
Electrical Characteristics (Ta=25 )
Characteristic
Collector Cut-off Current
Emitter Cut-off Current
Collector-Emitter Voltage
DC Current Transfer Ratio
Collector-Emitter Saturation Voltage
Cut-off Frequency
Output Capacitance
Symbol Test Conditions
ICBO VCB=200V
IEBO VEB=6V
VCEO IC=50mA
hFE VCE=4V, IC=3A
VCE (sat) IC=5A, IB=0.5A
fT VCE=12V, IE=-0.5A
Cob
VCB=10V, IE=0A
f=1MHz
hFE : 70 140 (P), 90 180 (Y)
hFE rank
Limits
MIN TYP MAX Unit
10 A
10 A
140 V
70 180
0.5 V
20 MHz
250 pF
050812
SSE-23638
16
61426-01




MN130S pdf, 반도체, 판매, 대치품
6.
CAUTION/ WARNING
CAUTION/ WARNING
Since reliability can be affected adversely by improper storage environment and handling methods
during Characteristic tests, please observe the following cautions.
(1)
Cautions for Storage
(5 35 )
(40 75%)
Ensure that storage conditions comply with the standard temperature (5 to 35 ) and the standard relative
humidity (around 40 to 75%) and avoid storage locations that experience extreme changes in temperature
or humidity.
Avoid locations where dust or harmful gases are present and avoid direct sunlight.
Reinspect for rust leads and solderbility that have been stored for a long time.
(2)
Cautions for characteristic Tests and Handling
When characteristic tests are carried out during inspection testing and other standard tests periods, protect
the Power Transistors from surge of power from the testing device, shorts between the Power Transistors
and the heatsink.
(3)
Silicone Grease
When using a heatsink, please coat the back surface of the Power Transistors and both surfaces of the
insulating plate with a thin layer of silicone grease to improve heat transfer between the Power
Transistors and the heatsink. There are types of silicone grease of which oil ingredients may permeate the
inside of products. Since there is a possibility that it may shorten the lifetime of the products, please pay
sufficient attention to the choice of the silicone grease.
Recommended Silicone grease
G746
(
YG6260 (
SC102 (
( ) Shin-Etsu Chemical Co., Ltd.)
( ) Toshiba Silicone Co., Ltd.)
( ) Dow Corning Toray Silicone Co., Ltd.)
050812
SSE-23638
46
61426-01

4페이지












구       성총 6 페이지
다운로드[ MN130S.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

상호 : 아이지 인터내셔날

사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
MN130S

silicon power transistor

Sanken
Sanken

DataSheet.kr    |   2020   |  연락처   |  링크모음   |   검색  |   사이트맵