Datasheet.kr   

HBSW-8000 PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 HBSW-8000
기능 Hewlett-Packard SmartWand Bar Code Reader
제조업체 Agilent(Hewlett-Packard)
로고 Agilent(Hewlett-Packard) 로고 



전체 5 페이지

		

No Preview Available !

HBSW-8000 데이터시트, 핀배열, 회로
H
Hewlett-Packard SmartWand
Bar Code Reader
Technical Data
HBSW-8000 Series
Polycarbonate or Metal
Housing
Features
• Automatically Decodes 9 Bar
Code Symbologies
- Code 39 – Standard or
Extended
- Int. 2 of 5 Code 128
- UPC A, E EAN 8, 13
- Codabar
Code 11
- MSI Code Code 93
• LED Feedback
• Low Current Draw
• Programmable Either by Bar
Code Labels or by Escape
Sequences
• Configuration Stored in Non-
Volatile Memory
• CMOS/TTL Interface
- Output 0 to 5 volts
- Input up to ± 15 volts
• Manufacturing - ISO 9002
Certified
• Full One Year Warranty
Description
The Hewlett-Packard SmartWand
Bar Code Reader is a bar code
scanning wand with an integrated
decoder. It transmits data to a
computer via an asynchronous
serial port, using CMOS level
signals, at user definable baud
rates. The SmartWand Reader’s
configuration may be changed by
scanning special bar code menus,
or by sending escape sequences
to the wand from the host. The
configuration is stored in non-
volatile memory, allowing the
SmartWand Reader to retain the
configuration when the power is
turned off. A Configuration
Display option sends a summary
of the configured options to the
screen.
In its default configuration, the
SmartWand Reader can
automatically recognize and
decode 9 standard bar code
symbologies. Configurable
options include: symbology
selection, checksum verification,
length checking, message editing,
LED feedback control, Code 39
digital wand emulation mode,
serial port configuration, and
various I/O protocols such as
single read modes, Xon/Xoff
pacing and no-read recognition.
The polycarbonate-cased
SmartWand Readers (HBSW-
8000,8200,8400) have an LED
near the tip that flashes after a
good read. The LED also flashes
during bar code menu
programming and to signal any
self-test failures after power-up.
All SmartWand Readers have an
enhanced software version of
Hewlett-Packard’s proven
4-66
5965-5940E




HBSW-8000 pdf, 반도체, 판매, 대치품
Connector
The standard connector is a 9 pin male D
connector. There is also an option for the cable
to have stripped and tinned wires.
Pin Diagram
Pin #
1
2
Wire
Color
-
White
3 Green
4, 5, 6
7
8
9
Shell
-
Black
-
Red
Braid
Function
N/C
TxD Transmitted Data
(from the Reader)
RxD Received Data
(to the Reader)
N/C
Ground
N/C
VCC
Shield
Shield and ground are tied together in the
connector.
12345
6789
MALE 9 PIN SUBMINIATURE D CONNECTOR
TxD Output Specifications
(VCC = 4.5 V, TA = 25°C)
Min.
VOH 4.4 V @ 20 µA
3.8 V @ 6 mA
VOL
IOL
Max.
0.10 V @ -20 µA
0.33 V @ -6 mA
35 mA
TxD Circuit
74HCT240
TxD
Pin 3 RxD - The received data signal RxD
expects the standard asynchronous serial data
format. It will accept either CMOS level or true
RS-232 level signals. The figure below shows the
equivalent input circuit.
RxD Input Specifications
(VCC = 5.0 V, TA = 25°C)
VIH 2.0 V 500 µA
VIL 0.8 V @ 1 µA
RxD Circuit
RxD
4.7 k
100 k
74HCT240
Pin Description
Pin 2 TxD - The data output signal TxD obeys
standard serial asynchronous data formats, but
uses zero to five volts CMOS logic levels. It can
be described as CMOS level RS-232. The TxD
output circuit is shown in the figure below. It
will drive TTL, LSTTL, CMOS, HC, and HCT
inputs.
Note: If the part is purchased with stripped and
tinned wires, or if the connector is removed, the
ground and shield wires must be connected
together for proper operation.
4-69

4페이지













구       성총 5 페이지
다운로드[ HBSW-8000.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
HBSW-8000

Hewlett-Packard SmartWand Bar Code Reader

Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵