|
|
|
부품번호 | KP3000 기능 |
|
|
기능 | Digital Program Setter | ||
제조업체 | CHINO | ||
로고 | |||
전체 30 페이지수
INST.No. INE-811
Digital Program Setter
KP3000
[General]
1. Introduction
Thank you for purchasing Digital Program Setter 'KP 3000 series'.
KP 3000 series is Digital Program Setter with output accuracy of ±0.1%, output update cycle of approximately
0.5 seconds and front size of 96X96mm.
Storing up to 30 types of program patterns etc. are the various functionalities that are provided as standard
provisions.
Besides a digital indicator with large easy to view LED display, various settings have an interactive system with
high resolution dot matrix LCD display and handling is also easy with precise control.
Understand the setter properly and read this instruction manual beforehand in order to avoid any trouble.
This is a 'General' instruction manual. For specification regarding communications, read 'Communication'
instruction manual along with this manual.
Request
-For the persons doing instrumentation, installation and sales-
Be sure to handover this instruction manual to the persons using this product.
- For the users of this product -
Preserve this instruction manual until you scrap this product.
Write down and keep the contents of setting.
Notice
1. You should not copy or forward fully or partially this document without prior notice.
2. The contents of this document may be changed without notice.
3. We have taken enough care regarding the contents of this document however if at all you notice a
mistake, contact our nearest office.
4. Please understand that regarding the result of the operation, whatever is the result the company will
not be responsible.
-1-
4페이지 2-3. Important
In order to avoid severe accidents always read these contents and
Warning understand them.
1. Confirm the power supply voltage and wiring
Before supplying the power to the instrument, check that the wiring is correct, power supply voltage
matches with the rated voltage and grounding is done.
2. Install over current protection device
The setter does not have a power supply switch. Install an over current protection device (Breaker etc.)
that matches the rating specifications, in the power supply of the setter.
3. Protection of terminal
To prevent electric shock, provide the terminal of the setter with safety measures such that the user will
not directly be able to touch the final product.
4. Installing the safety device
Regarding the use of a device that anticipates a big loss due to failure of the setter and the peripheral
devices, always install a safety device for preventing these losses and implement fail safe design in the
final product. Do not use it in important utilities facilities in which human life, atomic energy, aviation,
space etc, are involved.
5. Do not put your hands inside the setter
Do not put your hand or a tool inside the setter. You may get an injury or an electric shock.
6. Power cut off in case of suspicion
If there is an offensive smell, a strange noise or smoke or if the temperature increases abnormally, it is
very risky hence cut off the power supply immediately and contact the dealer or our nearest office.
7. Prohibiting repairing and remodeling
If repairing or remodeling is necessary, contact the dealer or our nearest office. Only the service
engineers appointed by our company will change the parts, do the repairing and remodeling.
8. Strictly follow the instruction manual
In order to use the setter correctly and safely, follow this instruction manual. Please understand
beforehand that our company will not at all be responsible for any claims for injury, damage, and passive
damage due to wrong use of the product.
-4-
7페이지 | |||
구 성 | 총 30 페이지수 | ||
다운로드 | [ KP3000.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
KP3000 | Digital Program Setter | CHINO |
KP3000A | Phase Control Thyristor | HUAJING |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |