NOIL1SM0300A-QDC Datasheet PDF - ON Semiconductor
| Part Number | NOIL1SM0300A-QDC | |
| Description | LUPA300 CMOS Image Sensor | |
| Manufacturers | ON Semiconductor | |
| Logo |  |
|
|
There is a preview and NOIL1SM0300A-QDC download ( pdf file ) link at the bottom of this page. Total 30 Pages | ||
Preview 1 page No Preview Available !
NOIL1SM0300A
LUPA300 CMOS Image
Sensor
Features
• 640(H) x 480(V) Active Pixels (VGA Resolution)
• 9.9 mm x 9.9 mm Square Pixels (Based on the High-Fill Factor
Active Pixel Sensor Technology of FillFactory (US patent No.
6,225,670 and others)).
• Optical Format: 1/2 Optical Inch
• Pixel Rate of 80 MHz
• Frame Rate: 250 fps at Full Resolution
• On-Chip 10 bit ADCs
• Global Shutter
• Subsampling (Y Direction)
• Serial Pheripheral Interface (SPI)
• Programmable Read Out Direction (X and Y)
• Random Programmable Windowing
• Power Dissipation: 190 mW
• 48-pin LCC Package
• These Devices are Pb−Free and are RoHS Compliant
http://onsemi.com
Applications
• Machine Vision
• Motion Tracking
Figure 1. LUPA300 Package Photo
Overview
This document describes the interfacing and driving of the LUPA300 image sensor. The pixel size and resolution result in a
6.3 mm x 4.7 mm optical active area (1/2 inch).
This VGA-resolution CMOS active pixel sensor features global shutter and a maximal frame rate of 250 fps in full
resolution, where integration during readout is possible. The readout speed can be boosted by means of subsampling and
windowed Region Of Interest (ROI) readout. High dynamic range scenes can be captured using the double and multiple slope
functionality. User programmable row and column start/stop positions allow windowing. subsampling reduces resolution
while maintaining the constant field of view and an increased frame rate. The programmable gain and offset amplifier maps
the signal swing to the ADC input range. A 10-bit ADC converts the analog data to a 10-bit digital word stream. The sensor
uses a 3-wire Serial-Parallel (SPI) interface. It operates with a 3.3 V and 2.5 V power supply and requires only one master
clock for operation up to 80 MHz pixel rate. It is housed in an 48-pin ceramic LCC package.
The sensor is available in a monochrome version or Bayer (RGB) patterned color filter array.
This data sheet allows the user to develop a camera-system based on the described timing and interfacing.
ORDERING INFORMATION
Marketing Part Number
NOIL1SM0300A-QDC
NOIL1SE0300A-QDC
NOIL1SM0300A-WWC
Description
Mono with Glass
Color micro lens with Glass
Mono Wafer Sales
NOTE: For more information, see Ordering Code Information on page 27.
Package
48 pin LCC
Wafer Sales
© Semiconductor Components Industries, LLC, 2013
February, 2013 − Rev. 10
1
Publication Order Number:
NOIL1SM0300A/D
|
| |
 
NOIL1SM0300A
SENSOR ARCHITECTURE
The floor plan of the architecture is shown in Figure 4. The
image core consists of a pixel array, an X- and Y-addressing
register, pixel array drivers, and column amplifiers. The
image sensor of 640 x 480 pixels is read out in progressive
scan.
The architecture allows programmable addressing in the
x-direction in steps of 8 pixels and in the y-direction in steps
of 1 pixel. The starting point of the address is uploadable by
means of the Serial Parallel Interface (SPI).
The PGAs amplify the signal from the column and add an
offset so the signal fits in the input range of the ADC. The
four ADCs then convert the signal to the digital domain.
Pixels are selected in a 4 * 1 kernel. Every ADC samples the
signal from one of the 4 selected pixels. Sampling frequency
is 20 MHz. The digital outputs of the four ADCs are
multiplexed to one output bus operating at 80 MHz.
Figure 4. Floor Plan of the Sensor
Pixel Architecture
The LUPA300 is designed on the 6T pixel architecture.
Color Filter
The LUPA300 can also be processed with a Bayer RGB
color pattern. Pixel (0,0) has a red filter.
Figure 5. Color Filter Arrangement on the Pixels
http://onsemi.com
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for NOIL1SM0300A-QDC electronic component. |
| Information | Total 30 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ NOIL1SM0300A-QDC.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| NOIL1SM0300A-QDC | The function is LUPA300 CMOS Image Sensor. ON Semiconductor | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
NOIL
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||