Datasheet.kr   

ACV13212 데이터시트 PDF




NAiS에서 제조한 전자 부품 ACV13212은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 ACV13212 자료 제공

부품번호 ACV13212 기능
기능 MICRO-ISO/MICRO-280 RELAY
제조업체 NAiS
로고 NAiS 로고


ACV13212 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 4 페이지수

미리보기를 사용할 수 없습니다

ACV13212 데이터시트, 핀배열, 회로
CV
AUTOMOTIVE LOW PROFILE
MICRO-ISO/MICRO-280
CV-RELAYS
RELAY
Micro ISO 1c type Micro ISO 1a type
Micro 280 plug-in type Micro 280 PCB type
FEATURES
• Low profile:
22.5 mm(L)×15 mm(W)×15.7 mm(H)
.886 inch(L)×.591 inch(W)×.618 inch(H)
• Low temperature rise
Terminal temperature has been reduced
compared with using our conventional
product
• Low sound pressure level
Noise level has been reduced
approx.10dB compared with using our
conventional product.
• Wide line-up
Micro ISO/Micro 280 terminal types and
resistor and diode inside type, PCB
terminal type (Micro 280 only).
• Plastic sealed type
Plastically sealed for automatic cleaning.
SPECIFICATIONS
Contact
Arrangement
1 Form A
1 Form C
Contact material
Silver alloy
Initial contact resistance,
max. (By voltage drop 6 V
DC 1 A)
50m
Initial contact voltage drop,
max.
N.O.: 0.2 V
(at 20 A switching)
N.O.: 0.2 V
(at 20 A switching)
N.C.: 0.5 V
(at 10 A switching)
Rating
Nominal
switching
capacity
Max. carrying
current
(14 V DC,
at 85°C 185°F)
N.O.: 20 A 14 V DC
N.O.: 20 A 14 V DC
N.C.: 10 A 14 V DC
N.O.: 20 A
N.O.: 20 A
N.C.: 10 A
Mechanical
Expected (at 120 cpm)
life (min.
operation) Electrical
(at rated load)
Min. 106
Min. 105*1
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 At nominal switching capacity, operating frequency: 2s ON, 2s OFF
*2 Measurement at same location as “Initial breakdown voltage” section.
*3 Detection current: 10mA
*4 Excluding contact bounce time.
*5 Half-wave pulse of sine wave: 11 ms; detection time: 10 µs
*6 Half-wave pulse of sine wave: 6 ms
*7 Detection time: 10 µs
*8 Time of vibration for each direction;
X Y X, Y, Z direction: 4 hours
Z
Characteristics
Max. operating speed
(at nominal switching capacity)
Initial insulation resistance *2
Initial
breakdown
voltage *3
Between open contacts
Between contacts and coil
Operate time *4
(at nominal voltage) (at 20°C 68°F)
Release time (without diode) *4
(at nominal voltage) (at 20°C 68°F)
Shock resistance
Functional *5
Destructive *6
Vibration resistance
Functional *7
Destructive *8
Conditions in case of
operation, transport and
storage *9
(Not freezing and condensing
at low temperature)
Unit weight
Ambient
temp*10
Humidity
15cpm
Min. 20M
(at 500 V DC)
500 Vrms for 1min.
500 Vrms for 1min.
Max. 10ms
Max. 10ms
Min. 100 m/s2{10 G}
Min. 1,000 m/s2{100 G}
10 to 100 Hz,
Min.44.1 m/s2 {4.5 G}
10 to 500 Hz,
Min.44.1 m/s2 {4.5 G}
–40 to +85°C
–40 to +185°F
25 to 85% R.H.
Approx. 15.0g .53 oz
*9 Refer to 5. Usage, transport and storage condition mentioned in NOTES
*10 Ambient temperature 125°C 257°F type is also available. Please contact us for
details.
TYPICAL APPLICATIONS
Automotive system
Condenser fan, Wiper, Defogger, Magnet clutch, Radiator fan,
Foglamp, Auto cruise control, Horn, Heater, Air Compressor
1




ACV13212 pdf, 반도체, 판매, 대치품
CV
2-(3). Electrical life (Lamp load)
Tested sample: ACV31212
Quantity: n = 5
Load: 120W, Inrush 80A, Steady 10A, 14V DC
Operating frequency: ON 2s, OFF 13s
Ambient temperature: Room temperature
Circuit:
Tested sample
120W
NOTES
1. Coil operating power
Pure DC current should be applied to the
coil.The wave form should be rectangular.
If it includes ripple, the ripple factor should
be less than 5%. However, check it with
the actual circuit since the characteristics
may be slightly different.
2. Voltage applied to coil
To ensure reliable operation, please apply
nominal voltage to the coil. Beware of the
fact that pick-up voltage and drop-out
voltage vary depending on the ambient
temperature and conditions.
3. Operating life
Operating life varies depending on the
type and load of the coil drive circuit, as
well as factors like the operating
frequency, operating phase and ambient
atmosphere, so please check with actual
equipment.
4.Soldering
We recommend the following soldering
conditions.
1) Automatic soldering
* Preheating: 100°C 212°F, within 2 mins
(PC board solder surface)
* Soldering: 260°C 500°F, within 5 s
2) Hand soldering
* Iron tip temperature: 280 to 300°C 536
to 571°F
* Soldering iron: 30 to 60W
* Soldering time: Within 5 s
10
Contact welding: 0 times
Miscontact: 0 times
8
Pick-up voltage
Max.
X
6 Min.
4
Drop-out voltage
Max.
2X
Min.
0
0 10
No. of operations, × 104
5. Usage, transport and storage
conditions
1) Ambient temperature, humidity, and
atmospheric pressure during usage,
transport, and storage of the relay:
(1) Temperature:
–40 to +85°C –40 to +185°F
(2) Humidity: 5 to 85% RH
(Avoid freezing and condensation.)
The humidity range varies with the
temperature. Use within the range
indicated in the graph below.
Humidity, %R.H.
85
Tolerance range
(Avoid freezing when (Avoid
used at temperatures condensation when
lower than 0°C 32°F) used at temperatures
higher than 0°C 32°F)
5
–40 0
–40 +32
Temperature, °C °F
+85
+185
(3) Atmospheric pressure: 86 to 106 kPa
2) Condensation
Condensation forms when there is a
sudden change in temperature under high
temperature and high humidity conditions.
Condensation will cause deterioration of
the relay insulation.
3) Freezing
Condensation or other moisture may
freeze on the relay when the
temperatures are lower than 0°C 32°F.
This causes problems such as sticking of
movable parts or operational time lags.
4) Low temperature, low humidity
environments
The plastic becomes brittle if the relay is
exposed to a low temperature, low
humidity environment for long periods of
time.
6. Others
1) If in error the relay has been dropped,
the appearance and characteristics
should be checked before use without fail.
2) Please do not use the coating material
of organic system which contains solvents
such as xylene and toluene for this
product.
142/1/2001
All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.
Go To Online Catalog

4페이지












구       성 총 4 페이지수
다운로드[ ACV13212.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
ACV13212

MICRO-ISO/MICRO-280 RELAY

NAiS
NAiS

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵