|
|
|
부품번호 | M195RTN01.0 기능 |
|
|
기능 | Color TFT-LCD | ||
제조업체 | AUO | ||
로고 | |||
Product Specification
AU OPTRONICS CORPORATION
( V ) Preliminary Specification
( ) Final Specification
Module
Model Name
19.5” Color TFT-LCD
M195RTN01.0
M195RTN01.0
Customer
Date
Approved by
Note: This Specification is subject to
change without notice.
Approved by
Date
Howard Lee
Jan 19, 2013
Prepared by
Date
Eric Lee
Jan 19, 2013
AU Optronics corporation
document version 1.0
1
Product Specification
AU OPTRONICS CORPORATION
M195RTN01.0
1 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case a TFT-LCD Module has to be put back into the packing container slot after once it
was taken out from the container, do not press the center of the LED lightbar edge. Otherwise
the TFT-LCD Module may be damaged.
10) Insert or pull out the interface connector, be sure not to rotate nor tilt it of the TFT-LCD
Module.
11) Do not twist nor bend the TFT -LCD Module even momentary. It should be taken into
consideration that no bending/twisting forces are applied to the TFT-LCD Module from
outside. Otherwise the TFT-LCD Module may be damaged.
12) Please avoid touching COF position while you are doing mechanical design.
13) When storing modules as spares for a long time, the following precaution is necessary:
Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep
the temperature between 5℃ and 35℃ at normal humidity.
document version 1.0
4
4페이지 Product Specification
AU OPTRONICS CORPORATION
M195RTN01.0
2.3 Optical Characteristics
The optical characteristics are measured on the following test condition.
Test Condition:
1. Equipment setup: Please refer to Note 2-2.
2. Panel Lighting time: 30 minutes
3. VDD=5.0V, Fv=60Hz,Is=65mA,Ta=25℃
Symbol
Description
Min. Typ. Max. Unit
Remark
Lw
White Luminance (Center of screen)
200 250
-
[cd/m2] Note 2-2
By SR-3
Luni
Luminance Uniformity (9 points)
75 80
-
[%] Note 2-3
By SR-3
CR
Contrast Ratio (Center of screen)
600 1000 -
- Note 2-4
By SR-3
θR Horizontal Viewing Angle
θL (CR=10)
Right
Left
75 85
75 85
-
-
ΦH Vertical Viewing Angle
ΦL (CR=10)
θR Horizontal Viewing Angle
θL (CR=5)
ΦH Vertical Viewing Angle
ΦL (CR=5)
Up
Down
Right
Left
Up
Down
70 80
70 80
75 88
75 88
70 85
70 85
-
-
Note 2-5
[degree]
- By SR-3
-
-
-
TR
Rising Time
- 3.8 5.5
TF
Response Time
Falling Time - 1.2 2.5 [msec] Note 2-6
-
Rising + Falling - 5 8
By TRD-100
Rx
Red x
0.614 0.644 0.674
Ry
Gx
Gy Color Coordinates
Bx (CIE 1931)
By
Wx
Red y
Green x
Green y
Blue x
Blue y
White x
0.303 0.333 0.363
0.292 0.322 0.352
0.593 0.623 0.653
0.125 0.155 0.185
0.028 0.058 0.088
0.283 0.313 0.343
-
By SR-3
Wy
White y
0.299 0.329 0.359
Note 2-7
CT Crosstalk - - 1.5 [%] By SR-3
FdB
Flicker (Center of screen)
- - -20 [dB] Note 2-8
By SR-3
document version 1.2
7
7페이지 | |||
구 성 | 총 30 페이지수 | ||
다운로드 | [ M195RTN01.0.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
M195RTN01.0 | Color TFT-LCD | AUO |
M195RTN01.1 | Color TFT-LCD | AUO |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |