|
|
|
부품번호 | TA1218N 기능 |
|
|
기능 | Audio/Video Switching IC | ||
제조업체 | Toshiba Semiconductor | ||
로고 | |||
전체 30 페이지수
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA1218N, TA1218F
Audio/Video Switching IC for TVs
TA1218N/F
The TA1218N/F is an audio/video switching IC for TV sets.
Conforming to I2C bus standards, it allows you to perform
various switching operations through the bus lines by using a
microcomputer. Thanks to its 2-channel outputs, the TA1218N/F
can also be used for the PIP systems. Furthermore, since the
presence of a signal on its sync signal output pin can be
determined by a microcomputer, it is possible to check each
input/output channel (self-diagnosis).
This IC has the same pin assignments as the TA1219AN
(SDIP36), a 1-channel output version of the TA1218N/F, so
these chips are pin compatible on pins 3 to 20 and 23 to 40.
Features
• I2C bus control
• Video : 5-channel inputs and 2-channel outputs
(2 channels conforming to S system)
• Audio : 5-channel inputs and 3-channel outputs
• Self-diagnostic function
• ADC inputs based on European 21-pin standards
• Switchable subaddress
TA1218N
TA1218F
Weight
SDIP42-P-600-1.78 : 4.13 g (typ.)
QFP48-P-1014-0.80: 0.83 g (typ.)
000707EBA1
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general
can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the
buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and
to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or
damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the
most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling
Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are
neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or
failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy
control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control
instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document
shall be made at the customer’s own risk.
• The products described in this document are subject to the foreign exchange and foreign trade laws.
• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its
use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or
others.
• The information contained herein is subject to change without notice.
2000-09-11 1/40
TA1218F
TA1218N/F
48 47 46 45 44 43 42 41 40 39
1 NC
2 VinTV
3 LinV1
4 NC
5 RinV1
6 VinV1
7 LinS1
8 Y/VinS1
9 RinS1
10 CinS1
11 LinS2
12 Y/VinS2
13 RinS2
14 NC
TA1218F
Vout1 38
Lout1 37
Yout 36
Rout1 35
Cout 34
VCC 33
NC 32
NC 31
Cin 30
RinV2 29
Yin 28
LinV2 27
VinV2 26
Address 25
15 16 17 18 19 20 21 22 23 24
2000-09-11 4/40
4페이지 Pin
No.
Name
Function
Interface
TA1218N/F
9
RinV1
(5)
This pin is for input a right audio
signal from an external source (V1
channel). This pin can also be used
for PIP signal input. The signal fed
into this pin is presented to Rout1
and Rout2.
The input dynamic range of this pin
is 6.5 Vp-p and the input resistance is
70 kΩ.
9
(5)
1.5 kΩ
<Rout1>
1.5 kΩ
<Rout2>
10
VinV1
(6)
This pin is for input a composite
video signal from an external source
(V1 channel). This pin can also be
used for PIP signal input. The signal
fed into this pin is presented to
Vout1, Vout2, Yout, and Cout. The
same signal is also output from Det
Select as a sync separation signal.
10
(6)
The input dynamic range of this pin
is 2.0 Vp-p and the input resistance is
30 kΩ.
1.5 kΩ
<Vout1>
<Yout>
<Cout>
1.5 kΩ
<Vout2>
1.5 kΩ
<Det Select>
11
LinS1
(7)
This pin is for input a left audio
signal from an external source (S1
channel). The signal fed into this pin
is presented to Lout1 and Lout2.
The input dynamic range of this pin
is 6.5 Vp-p and the input resistance is
70 kΩ.
11
(7)
1.5 kΩ
<Lout1>
1.5 kΩ
<Lout2>
12
Y/VinS1
(8)
This pin is for input a luminance
signal or composite video signal
from an external source (S1
channel). The signal fed into this pin
is presented to Vout1, Vout2, Yout,
and Cout. The same signal is also
output from Det Select as a sync
separation signal.
12
(8)
The input dynamic range of this pin
is 2.0 Vp-p and the input resistance is
30 kΩ.
1.5 kΩ
<Vout1>
<Yout>
<Cout>
1.5 kΩ
<Vout2>
1.5 kΩ
<Det Select>
2000-09-11 7/40
7페이지 | |||
구 성 | 총 30 페이지수 | ||
다운로드 | [ TA1218N.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
TA1218 | TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic | Toshiba Semiconductor |
TA1218ANG | Audio/Video Switching IC | Toshiba Semiconductor |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |