|
|
|
부품번호 | JN5161A 기능 |
|
|
기능 | IEEE802.15.4 Wireless Microcontroller | ||
제조업체 | NXP Semiconductors | ||
로고 | |||
Data Sheet: JN516x
IEEE802.15.4 Wireless Microcontroller
Overview
The JN516x series is a range of ultra low power, high performance wireless
microcontrollers supporting JenNet-IP, ZigBee PRO or RF4CE networking
stacks to facilitate the development of Home Automation, Smart Energy,
Light Link and Remote control applications. They feature an enhanced 32-
bit RISC processor with embedded Flash and EEPROM memory, offering
high coding efficiency through variable width instructions, a multi-stage
instruction pipeline and low power operation with programmable clock
speeds. They also include a 2.4GHz IEEE802.15.4 compliant transceiver
and a comprehensive mix of analogue and digital peripherals. Three
memory configurations are available to suit different applications. The best
in class operating current of 15mA, with a 0.6uA sleep timer mode, gives
excellent battery life allowing operation direct from a coin cell.
The peripherals support a wide range of applications. They include a 2-wire
I2C, and SPI ports which can operate as either master or slave, a four
channel ADC with battery and a temperature sensor. It can support a large
switch matrix of up to 100 elements, or alternatively a 20 key capacitive
touch pad.
Block Diagram
XTAL
2.4GHz
Radio
Including
Diversity
Power
Management
Watchdog
Timer
Voltage Brownout
O-QPSK
Modem
IEEE 802.15.4
Baseband
Processor
128-bit AES
Hardware
Encryption
RAM
8/32K
Flash
64/160/256K
32-bit
RISC CPU
4kB
EEPROM
SPI
Master & Slave
2-Wire Serial
(Master/Slave)
4xPWM + Timer
2xUART
20 DIO
Sleep Counter
4-Channel
10-bit ADC
Battery and
Temp Sensors
Benefits
• Single chip device to run
stack and application
• Very low current solution for
long battery life – over 10 yrs
• Supports multiple network
stacks
• Highly featured 32-bit RISC
CPU for high performance
and low power
• System BOM is low in
component count and cost
• Flexible sensor interfacing
options
Applications
• Robust and secure low power
wireless applications
• RF4CE Remote Controls
• JenNet-IP networks
• ZigBee SE networks
• ZigBee Light Link networks
• Lighting & Home automation
• Toys and gaming peripherals
• Smart Energy
• Energy harvesting, for
example self powered light
switch
Features: Radio
• 2.4GHz IEEE802.15.4 compliant
• 128-bit AES security processor
• MAC accelerator with packet
formatting, CRCs, address check,
auto-acks, timers
• Integrated ultra low power sleep
oscillator – 0.6µA
• 2.0V to 3.6V battery operation
• Deep sleep current 0.12µA (Wake-up
from IO)
• <$0.15 external component cost
• RX current 17mA , TX 15mA
• Receiver sensitivity -95dBm
• Transmit power 2.5dBm
• Time of Flight engine for ranging
• Antenna Diversity (Auto RX)
Features: Microcontroller
• 32-bit RISC CPU, 1 to 32MHz clock
speed
• Variable instruction width for high
coding efficiency
• Multi-stage instruction pipeline
• JN5161: 64kB/8kB/4kB
• JN5164: 160kB/32kB/4kB
• JN5168: 256kB/32kB/4kB
(Flash/RAM/EEPROM)
• Data EEPROM with guaranteed 100k
write operations.
• RF4CE, JenNet-IP, ZigBee SE and
ZigBee Light Link stacks
• 2-wire I2C compatible serial interface.
Can operate as either master or slave
• 5xPWM (4x timer & 1 timer/counter)
• 2 low power sleep counters
• 2x UART
• SPI Master & Slave port, 3 selects
• Supply voltage monitor with 8
programmable thresholds
• 4-input 10-bit ADC, comparator
• Battery and temperature sensors
• Watchdog & Brown Out Reset
• Up to 20 Digital IO Pins (DIO)
• Infra-red remote control transmitter
Temp range (-40°C to +125°C)
6x6mm 40-lead
Lead-free and RoHS compliant
© NXP Laboratories UK 2013
JN-DS-JN516x v1.3 Production
1
17 Analogue Peripherals
17.1 Analogue to Digital Converter
17.1.1 Operation
17.1.2 Supply Monitor
17.1.3 Temperature Sensor
17.1.4 ADC Sample Buffer Mode
17.2 Comparator
18 Power Management and Sleep Modes
18.1 Operating Modes
18.1.1 Power Domains
18.2 Active Processing Mode
18.2.1 CPU Doze
18.3 Sleep Mode
18.3.1 Wakeup Timer Event
18.3.2 DIO Event
18.3.3 Comparator Event
18.3.4 Pulse Counter
18.4 Deep Sleep Mode
19 Electrical Characteristics
19.1 Maximum Ratings
19.2 DC Electrical Characteristics
19.2.1 Operating Conditions
19.2.2 DC Current Consumption
19.2.3 I/O Characteristics
19.3 AC Characteristics
19.3.1 Reset and Supply Voltage Monitor
19.3.2 SPI Master Timing
19.3.3 SPI Slave Timing
19.3.4 Two-wire Serial Interface
19.3.5 Wakeup Timings
19.3.6 Bandgap Reference
19.3.7 Analogue to Digital Converters
19.3.8 Comparator
19.3.9 32kHz RC Oscillator
19.3.10 32kHz Crystal Oscillator
19.3.11 32MHz Crystal Oscillator
19.3.12 High-Speed RC Oscillator
19.3.13 Temperature Sensor
19.3.14 Non-Volatile Memory
19.3.15 Radio Transceiver
Appendix A Mechanical and Ordering Information
A.1 SOT618-1 HVQFN40 40-pin QFN Package Drawing
A.2 Footprint Information
A.3 Ordering Information
A.4 Device Package Marking
A.5 Tape and Reel Information
A.5.1 Tape Orientation and Dimensions
A.5.2 Reel Information: 180mm Reel
A.5.3 Reel Information: 330mm Reel
4 JN-DS-JN516x v1.3 Production
54
54
55
56
56
56
56
57
57
57
57
57
57
58
58
58
58
58
59
59
59
59
60
61
61
61
63
64
65
65
66
66
67
67
68
68
69
69
69
70
76
76
77
78
79
80
80
81
82
© NXP Laboratories UK 2013
4페이지 1.3 Peripherals
The following peripherals are available on chip:
• Master SPI port with three select outputs
• Slave SPI port
• Two UART’s, one capable of hardware flow control (4-wire, includes RTS/CTS), and the other just 2-wire
(RX/TX)
• One programmable Timer/Counter which supports Pulse Width Modulation (PWM) and capture/compare, plus
four PWM timers which support PWM and Timer modes only.
• Two programmable Sleep Timers and a Tick Timer
• Two-wire serial interface (compatible with SMbus and I2C) supporting master and slave operation
• Twenty digital I/O lines (multiplexed with peripherals such as timers, SPI and UARTs)
• Two digital outputs (multiplexed with SPI port)
• 10-bit, Analogue to Digital converter with up to four input channels. Autonomous multi-channel sampling
• Programmable analogue comparator
• Internal temperature sensor and battery monitor
• Two low power pulse counters
• Random number generator
• Watchdog Timer and Supply Voltage Monitor
• JTAG hardware debug port
• Infra-red remote control transmitter, supported by one of the PWM timers
• Transmit and receive antenna diversity with automatic receive switching based on received energy detection
• Time of Flight engine for ranging
User applications access the peripherals using the Integrated Peripherals API. This allows applications to use a
tested and easily understood view of the peripherals allowing rapid system development.
© NXP Laboratories UK 2013
JN-DS-JN516x v1.3 Production
7
7페이지 | |||
구 성 | 총 30 페이지수 | ||
다운로드 | [ JN5161A.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
JN5161 | IEEE802.15.4 Wireless Microcontroller | NXP Semiconductors |
JN5161-001 | IEEE802.15.4 Wireless Microcontroller | NXP Semiconductors |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |