|
|
|
부품번호 | B131RW02-V0 기능 |
|
|
기능 | HD+ 16:9 Color TFT-LCD | ||
제조업체 | AUO | ||
로고 | |||
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specifications
( V) Final Specifications
Module
Model Name
Note
13.1” HD+ 16:9 Color TFT-LCD
with LED Backlight design
B131RW02 V0 (H/W:0A)
LED Backlight with driving circuit design
Customer
Date
Approved by
Date
Checked &
Approved by
Date
Allen KC Huang
2010/12/17
Prepared by
Date
Tony Kao
2010/12/17
Note: This Specification is subject to change
without notice.
NBBU Marketing Division
AU Optronics corporation
B131RW02 V0 Document Version : 1.0
1 of 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt
the Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example),
do not twist nor bend the TFT Module even momentary. At designing the enclosure, it
should be taken into consideration that no bending/twisting forces are applied to the TFT
Module from outside. Otherwise the TFT Module may be damaged.
12)Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
13)Disconnecting power supply before handling LCD modules, it can prevent electric shock, DO
NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT module that a
LED light bar build in as a light source of back light unit. It can prevent electrostic breakdown.
B131RW02 V0 Document Version : 1.0
4 of 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
4페이지 Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Note 1: 5 points position (Ref: Active area)
W /4
W /4
W
W /4
W /4
H /4
H /4
H
H /4
H /4
12
3
45
Note 2: 9 points position (Ref: Active area)
Note 3: The luminance uniformity of 5 or 9 points is defined by dividing the maximum luminance values by the
minimum test point luminance
ӬW5 =
Maximum Brightness of five points
Minimum Brightness of five points
ӬW9 =
Maximum Brightness of thirteen points
Minimum Brightness of thirteen points
Note 4: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change
during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for
60 minutes in a stable, windless and dark room, and it should be measured in the center of screen.! !
B131RW02 V0 Document Version : 1.0
7 of 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
7페이지 | |||
구 성 | 총 28 페이지수 | ||
다운로드 | [ B131RW02-V0.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
B131RW02-V0 | HD+ 16:9 Color TFT-LCD | AUO |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |