Datasheet.kr   

P42L6A-T1 데이터시트 PDF




Haier에서 제조한 전자 부품 P42L6A-T1은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 P42L6A-T1 자료 제공

부품번호 P42L6A-T1 기능
기능 PDP Module
제조업체 Haier
로고 Haier 로고


P42L6A-T1 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 30 페이지수

미리보기를 사용할 수 없습니다

P42L6A-T1 데이터시트, 핀배열, 회로
-1-
Service Manual
Model: P42L6A-T1
Specifications & Design are subject to change without notice.




P42L6A-T1 pdf, 반도체, 판매, 대치품
-4-
2. Safety Precautions
When servicing of PDP Module, it should be not enforced into another way
aside next rule, or a unaccustomed person should not repairing. When
using/handling this PDP Module, pay attention to the below warning and
cautions.
Warning
Indicates a hazard that may lead to death or injury if the warning is ignored
and the product is handled incorrectly.
Caution
Indicates a hazard that can lead to injury or damage to property if the
caution is ignored and the product is handled incorrectly.
1) WARNING
(1) Do not touch Signal and Power Connector while this product operates.
Do not touch EMI ground part and Heat Sink of Film Filter.
(2) Do not supply a voltage higher than that specified to this product. This may
damage the product and may cause a fire.
(3) Do not use this product in locations where the humidity is extremely high,
where it may be splashed with water, or where flammable materials surround
it.
Do not install or use the product in a location that does no satisfy the specified
environmental conditions. This may damage the product and may cause a fire.
(4) If a foreign substance (such as water, metal, or liquid) gets
inside the product, immediately turn off the power.
Continuing to use the product, it is may cause fire or electric shock.
(5) If the product emits smoke, and abnormal smell, or makes
an abnormal sound, immediately turn off the power.
Continuing to use the product, it may cause fire or electric shock.
(6) Do not disconnect or connect the connector while power to the product is
on. It takes some time for the voltage to drop to a sufficiently low level after the
power has been turned off.
Confirm that the voltage has dropped to a safe level before disconnecting or
connecting the connector.
(7) Do not pull out or insert the power cable from/to an outlet with wet hands. It
may cause electric shock.
(8) Do not damage or modify the power cable. It may cause fire or electric
shock.
(9) If the power cable is damaged, or if the connector is loose, do not use the
product: otherwise, this can lead to fire or electric shock.
(10) If the power connector or the connector of the power cable becomes dirty
or dusty, wipe it with a dry cloth.0therwise, this can lead to fire.
(11) PDP Module uses a high voltage (Max.450V dc). Keep the cautions
concerning electric shock and do not touch the Device circuitry when handling
the PDP Unit. And because the capacitor of the Device circuitry may remain

4페이지










P42L6A-T1 전자부품, 판매, 대치품
-7-
3.Photo of PDP taking apart
The introduction of circuit board at Back board:
NAME
MATERIAL CODE
MODEL (PDP 42X3)
0094014444
X-SUS(left)
0094014670
X-SUS(right)
0094014671
Y-SUS
0094014672
Y-DRIVER
0094014673
Z-SUS
0094014674
CTROL BOARD
0094014675
PSU
Y-SUS
0094014676
PSU
Z-SUS
Y-DRIVER(TOP)
Y-DRIVER(BTM)
X-SUS(left)
CTROL BOARD
X-SUS(right)

7페이지


구       성 총 30 페이지수
다운로드[ P42L6A-T1.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
P42L6A-T1

PDP Module

Haier
Haier

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵