Datasheet.kr   

GT11N-2PP-HU 데이터시트 PDF




Hirose Electric에서 제조한 전자 부품 GT11N-2PP-HU은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 GT11N-2PP-HU 자료 제공

부품번호 GT11N-2PP-HU 기능
기능 Coaxial cable connection of Antennas/ Sensors/ and Communication Trunk Lines
제조업체 Hirose Electric
로고 Hirose Electric 로고


GT11N-2PP-HU 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 16 페이지수

미리보기를 사용할 수 없습니다

GT11N-2PP-HU 데이터시트, 핀배열, 회로
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT11 Series
— Connectors for coaxial cables —
Features
Cost efficient termination
Highly efficient and reliable single motion crimp termination allows high volume production with semi-
automatic equipment.
Lock-release latching system
Shock / vibration resistant electrical connections
Verification of the full contact insertion
77




GT11N-2PP-HU pdf, 반도체, 판매, 대치품
M Connectors
Housing
BRecommended Board Mounting Pattern
For outer conductor
For inner conductor
Part Number
GT11-2S-HU
CL No.
Material
PBT
761-0005-1
Brass
PBT
Phosphor bronze
Finish
----
Tin plating
----
Tin plating
Color
Light gray
----
Dark gray
----
Housing (2-position Type)
BFully mated connector
assemblies
BRecommended
Panel Cut-out
Part Number
GT11X-2/2P-DS
CL No.
Material
PBT
761-0022-0
Brass
PBT
Phosphor bronze
Finish
----
Tin plating
----
Tin plating
Color
Light gray
----
Dark gray
----
Housing (Straight Type)
Part Number
GT11-2P-DSA
CL No.
761-0038-0
80
BRecommended Board
Mounting Pattern
For outer conductor
For inner conductor
BRecommended Board Mounting Pattern
BFully mated connector assemblies

4페이지










GT11N-2PP-HU 전자부품, 판매, 대치품
BTermination sequence
1Strip the cable.
Cable
Shield
6Insert the internal terminals into the Outer terminals.
The joined side of the crimp portion faces upward
(for both male and female).
2Cut the shield and expose the wire.
Wire
3Cut back the shield above the sheath and wrap with
conductive tape.
7Crimp the Outer terminal.
The shield must be visible.
4Strip the wire and form it.
Conductor
Jig used: Outside tube caulking jig.
(Refer to Page 91 for detail.)
8Insert the terminal into the housing.
(Please insert until the terminal is stopped by the lance.)
Jig used: Cable-forming strip jig
(Refer to Page 85 for detail.)
5Crimp the wire to the internal terminal.
1mm max.
9Mount the retainer to complete the task.
Jig used: Automatic crimping machine.
(Refer to Page 85 for detail.)
Refer to Page 84 for information
about the retainer mounting
method.
83

7페이지


구       성 총 16 페이지수
다운로드[ GT11N-2PP-HU.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
GT11N-2PP-HU

Coaxial cable connection of Antennas/ Sensors/ and Communication Trunk Lines

Hirose Electric
Hirose Electric

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵