|
|
|
부품번호 | G150XG01-V4 기능 |
|
|
기능 | Color TFT-LCD | ||
제조업체 | AUO | ||
로고 | |||
전체 30 페이지수
Global LCD Panel Exchange Center
www.panelook.com
( ) Preliminary Specifications
( V ) Final Specifications
Module
Model Name
15 Inch Color TFT-LCD
G150XG01 V4
G150XG01 V4
Customer
Date
Approved by
Date
Vito Huang
2012/08/06
Checked &
Approved by
Prepared by
Christine Huang
2012/08/06
Note: This Specification is subject to change
without notice.
Audio-Video Business Unit /
AU Optronics corporation
G150XG01 V4 rev 1.0
1/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
G150XG01 V4
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the LED Reflector edge. Instead,
press at the far ends of the LED Reflector edge softly. Otherwise the TFT Module may
be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very
short time. Please design your display product well to avoid external force applying to module
by end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time.
14) Continuous operating TFT-LCD Module under high temperature environment may accelerate
LED light bar exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when TFT-LCD module is placed in
landscape position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use
screen saver or moving content periodically if fixed pattern is displayed on the screen.
G150XG01 V4 rev 1.0
4/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
4페이지 Global LCD Panel Exchange Center
www.panelook.com
G150XG01 V4
Note 1:
Δ1ΚCover Lens thickness
Δ2ΚThe air gap between the cover lens and the sensor glass
Δ3ΚTouch sensing heightˍʳMake sure Δ3 of your design be less than 3mm, Maximum sensing height is 3mm
Note 2:
Except Window 7 application, the driver is necessary to be installed before operating. Available drivers are listed as
below.
OS
Windows XP
Windows 7 start
Kernal
ʳ X86
ʳ X86
Hardware
Driver
USB
Software
SP3
Win 7 start
Remark
Driver needed
Only single touch
No driver is required
G150XG01 V4 rev 1.0
7/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
7페이지 | |||
구 성 | 총 30 페이지수 | ||
다운로드 | [ G150XG01-V4.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
G150XG01-V0 | LCD Module | AUO |
G150XG01-V1 | LCD Module | AUO |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |