|
|
PDF TS9511 Data sheet ( Hoja de datos )
| Número de pieza | TS9511 | |
| Descripción | Precision rail-to-rail input/output 3 MHz single operational amplifier | |
| Fabricantes | STMicroelectronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TS9511 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
TS9511
Precision rail-to-rail input/output 3 MHz single operational amplifier
TS9511ILT/TS9511IYLT
2XW
9&&
,1
9&&
,1
TS9511RILT/TS9511RIYLT
2XW
9&&
,1
9&&
,1
Datasheet - production data
Applications
• Signal conditioning
• Automotive applications
• Laptop/notebook computers
• Transformer/line drivers
• Personal entertainment (CD players)
• Portable communication (cell phones, pagers)
• Digital-to-analog converter buffers
• Portable headphone speaker drivers
Description
The TS9511 device is a single, precision
rail-to-rail operational amplifier whose supply
voltage range extends from 2.7 V to 12 V.
Its high-precision performance associated with
an SOT23-5 package make it suitable for a wide
range of demanding applications, such as
industrial, automotive, consumer, and computer
applications.
Features
• Good precision: 800 µV max.
• Rail-to-rail input and output
• Wide supply voltage range: 2.7 V to 12 V
• High-speed (3 MHz, 1 V/µs)
• Low consumption (900 µA at 3 V)
• Supply voltage rejection ratio: 85 dB
• Micropackage: SOT23-5
July 2013
This is information on a product in full production.
DocID15707 Rev 6
1/11
www.st.com
1 page  
TS9511
Electrical characteristics
Table 4. Electrical characteristics at VCC = +5 V, VDD = 0 V, Vicm = VCC/2,
RL connected to VCC/2, Tamb = 25 °C (unless otherwise specified)
Symbol
Parameter
Min. Typ. Max. Unit
Vio
Input offset voltage
Tmin ≤ Tamb ≤ Tmax
ΔVio/ΔT
Iio
Input offset voltage drift
Input offset current
Vicm = VCC/2
Tmin ≤ Tamb ≤ Tmax
Iib
Input bias current
Tmin ≤ Tamb ≤ Tmax
CMR
Common mode rejection ratio
Tmin ≤ Tamb ≤ Tmax
SVR
Supply voltage rejection ratio, VCC = 4 to 5 V
Tmin ≤ Tamb ≤ Tmax
Avd
Large signal voltage gain, Vo = 2 Vpk-pk, RL = 600 Ω
Tmin ≤ Tamb ≤ Tmax
VOH
High level output voltage, RL = 600 Ω
Tmin ≤ Tamb ≤ Tmax
VOL
Low level output voltage, RL = 600 Ω
Tmin ≤ Tamb ≤ Tmax
Isc Output short-circuit current
ICC
Supply current (per amplifier), no load, Vicm = VCC/2
Tmin ≤ Tamb ≤ Tmax
GBP
Gain bandwidth product
RL = 10 kΩ, CL = 100 pF
SR
Slew rate
RL = 10 kΩ, CL = 100 pF
∅m
Phase margin at unit gain
RL = 10k Ω, CL = 100 pF
Gm
Gain margin
RL = 10k Ω, CL =100 pF
en
Equivalent input noise voltage
f = 1 kHz
THD
Total harmonic distortion
Vout = 4 Vpk-pk, F = 10 kHz, AV = 2, RL = 10 kΩ
800
1500
µV
2 µV/°C
1 30
80
30 70
150
60 90
55
65 90
60
75 86
70
4.7 4.8
4.7
80 300
300
10 20
0.95 1.2
1.3
3
nA
dB
V
mV
mA
MHz
1 V/μs
61 Degrees
13
25
0.01
dB
---n---V-----
Hz
%
DocID15707 Rev 6
5/11
11
5 Page 
TS9511
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT AUTHORIZED FOR USE IN WEAPONS. NOR ARE ST PRODUCTS DESIGNED OR AUTHORIZED FOR USE
IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH
PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR
ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED
FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN
WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE,
AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS.
PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE
CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2013 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
DocID15707 Rev 6
11/11
11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet TS9511.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TS951 | (TS952 / TS954) INPUT/OUTPUT RAIL TO RAIL LOW POWER OPERATIONAL AMPLIFIERS |  ST Microelectronics |
| TS9511 | Precision rail-to-rail input/output 3 MHz single operational amplifier | STMicroelectronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |