|
|
|
부품번호 | 16TTS08 기능 |
|
|
기능 | Phase Control SCR | ||
제조업체 | Vishay | ||
로고 | |||
전체 7 페이지수
16TTS.. High Voltage Series
Vishay High Power Products
Phase Control SCR, 10 A
2
(A)
TO-220AB
PRODUCT SUMMARY
VT at 10 A
ITSM
VRRM
1 (K) (G) 3
< 1.4 V
200 A
800/1200 V
DESCRIPTION/FEATURES
The 16TTS.. High Voltage Series of silicon controlled
rectifiers are specifically designed for medium power
switching and phase control applications. The glass
passivation technology used has reliable operation up to
125 °C junction temperature.
Typical applications are in input rectification (soft start) and
these products are designed to be used with Vishay HPP
input diodes, switches and output rectifiers which are
available in identical package outlines.
This product has been designed and qualified for industrial
level.
OUTPUT CURRENT IN TYPICAL APPLICATIONS
APPLICATIONS
SINGLE-PHASE BRIDGE
Capacitive input filter TA = 55 °C, TJ = 125 °C,
common heatsink of 1 °C/W
13.5
THREE-PHASE BRIDGE
17
UNITS
A
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER
TEST CONDITIONS
IT(AV)
IRMS
VDRM/VRRM
ITSM
VT
dV/dt
Sinusoidal waveform
Range (1)
10 A, TJ = 25 °C
dI/dt
TJ Range
Note
(1) For higher voltage up to 1600 V contact factory
VOLTAGE RATINGS
PART NUMBER
16TTS08
16TTS12
VRRM, MAXIMUM PEAK
REVERSE VOLTAGE
V
800
1200
VALUES
10
16
800/1200
200
1.4
500
150
- 40 to 125
VDRM, MAXIMUM PEAK
DIRECT VOLTAGE
V
800
1200
UNITS
A
V
A
V
V/µs
A/µs
°C
IRRM/IDRM
AT 125 °C
mA
10
Document Number: 93696
Revision: 16-Sep-08
For technical questions, contact: [email protected]
www.vishay.com
1
16TTS.. High Voltage Series
Vishay High Power Products Phase Control SCR, 10 A
125
16TTS.. Series
120 R thJC (DC) = 1.3 °C/ W
115
Conduction Angle
110
105
100
95
90
0
30°
60°
90°
120°
180°
2 4 6 8 10 12
Average On-state Current (A)
Fig. 1 - Current Rating Characteristics
125
16TTS.. Series
120 R thJC(DC) = 1.3 °C/ W
115
Conduction Period
110
105
100 30° 60°
90°
95 120°
180° DC
90
0 2 4 6 8 10 12 14 16
Average On-state Current (A)
Fig. 2 - Current Rating Characteristics
18
180°
16 120°
90°
14 60°
12 30°
10 RMSLimit
8
Conduction Angle
6
4 16TTS.. Series
TJ= 125°C
2
0
0 1 2 3 4 5 6 7 8 9 10 11
Average On-state Current (A)
Fig. 3 - On-State Power Loss Characteristics
25
DC
180°
20 120°
90°
60°
30°
15
RMSLimit
10
Conduction Period
5 16TTS.. Series
TJ = 125°C
0
0 2 4 6 8 10 12 14 16 18
Average On-state Current (A)
Fig. 4 - On-State Power Loss Characteristics
180
At Any Rated Load Condition And With
Rated V RRMApplied Following Surge.
160
Initial TJ= 125°C
@60 Hz 0.0083 s
@50 Hz 0.0100 s
140
120
100
16TTS..Series
80
1
10 100
Number Of Equa l Amplitud e Half Cycle Current Pulses (N)
Fig. 5 - Maximum Non-Repetitive Surge Current
200
Maximum Non Repetitive Surge Current
Versus Pulse Train Duration.
180 Initial TJ= 125°C
No Vo ltage Reap plied
160 Ra ted VRRM Rea pplied
140
120
100
16TTS.. Series
80
0.01
0.1
1
Pulse Train Duration (s)
Fig. 6 - Maximum Non-Repetitive Surge Current
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 93696
Revision: 16-Sep-08
4페이지 Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
7페이지 | |||
구 성 | 총 7 페이지수 | ||
다운로드 | [ 16TTS08.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
16TTS08 | Phase Control SCR | Vishay |
16TTS08FP | PHASE CONTROL SCR TO-220 FULLPAK | International Rectifier |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |