Datasheet.kr   

Y0020100R250Q9L PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 Y0020100R250Q9L
기능 Bulk Metal Foil Technology Industrial Precision Resistors
제조업체 Vishay Siliconix
로고 Vishay Siliconix 로고 


전체 4 페이지

		

No Preview Available !

Y0020100R250Q9L 데이터시트, 핀배열, 회로
VSR Series
Vishay Foil Resistors
Bulk Metal® Foil Technology Industrial Precision Resistors
with TCR of ± 4 ppm/°C and Tolerance of ± 0.01 %
Any value at any tolerance available with resistance range
INTRODUCTION
Bulk Metal® Foil Technology out performs all other resistor
technologies available today for applications that require
high precision and high stability.
This technology has been pioneered and developed by
VISHAY, and products based on this technology are the
most suitable for a wide range of applications.
Generally Bulk Metal® Foil technology allows us to produce
customer orientated products designed to satisfy challenging
and specific technical requirements.
The VSR series of resistors is a low cost version of the well
established S-Series of resistors. These resistors are made
of foil elements so all of the inherent performance of foil is
retained. They do not however, have the same TCR or
tolerance ranges (see table 1 for details). These products
find a wide range of usage in high end stereo equipment and
some grades of test and measurement equipment.
Standoffs are dimensioned to provide a minimum lead
clearance of 0.010 inches between the resistor body and the
printed circuit board, when the standoffs are seated on the
board. This allows for proper cleaning after the soldering
process.
Our Applications Engineering Department is available to
advise and to make recommendations for non standard
technical requirements and special applications, please
contact us.
FIGURE 1 - POWER DERATING CURVE
- 55 °C
200 %
175 %
+ 70 °C
Double Rated Power
150 %
125 %
100 %
Rated Power
75 %
50 %
25 %
Safe operation
for < 150 ppm
R after 2000
hours load-life.
0
- 75 - 50 - 25
0 + 25 + 50 + 75 + 100 + 125 + 150 + 175 + 200
Ambient Temperature (°C)
FEATURES
Temperature Coefficient of Resistance (TCR)1):
± 4 ppm/°C (0 °C to + 60 °C)
± 8 ppm/°C (- 55 °C to + 125 °C, + 25 °C Ref.)
Pb-free
Available
Resistance Range: 0.5 Ω to 1 MΩ (higher or RoHS*
lower values of resistance are available)
COMPLIANT
Resistance Tolerance: to ± 0.01 %
Load Life Stability: to ± 0.005 % at 70 °C, 2000 hours at
rated power
Electrostatic Discharge above 25 000 V
Non Inductive, Non Capacitive Design
Rise time: 1 ns without ringing
Current Noise: - 40 dB
Thermal EMF: 0.05 µV/°C typical
Voltage Coefficient: < 0.1 ppm/V
Inductance: 0.08 µH
Matched Sets Available
Terminal Finishes Available: Lead (Pb)-free
Tin/Lead Alloy
Any value available within resistance range (e.g. 1K234)
Prototype samples available from 48 hours. For more
information, please contact foil@vishay.com
For better performances please review the S Series
datasheet
Note
1. For values below 50 Ω please contact Application Engineering
APPLICATIONS
Industrial
Medical
Audio (high end stereo equipment)
Test and Measurement equipment
Precision Amplifiers
FIGURE 2 - TRIMMING TO VALUES
(Conceptual Illustration)
Interloop Capacitance
Reduction in Series
Mutual Inductance
Reduction due
to Change in
Current Direction
Current Path
Before Trimming
Current Path
After Trimming
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Resistance
Note: Foil shown in black, etched spaces in white
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63009
Revision: 16-Jul-07
For any questions, contact: foil@vishay.com
www.vishay.com
1




Y0020100R250Q9L pdf, 반도체, 판매, 대치품
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1

4페이지













구       성총 4 페이지
다운로드[ Y0020100R250Q9L.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
Y0020100R250Q9L

Bulk Metal Foil Technology Industrial Precision Resistors

Vishay Siliconix
Vishay Siliconix

추천 데이터시트

부품번호상세설명 및 기능제조사
CQ1565RT

FSCQ1565RT, Green Mode Fairchild Power Switch. In general, a Quasi-Resonant Converter (QRC) shows lower EMI and higher power conversion efficiency compared to conventional hard-switched converter with a fixed switching frequency.

Fairchild
Fairchild
KF16N25D

MOSFET의 기능은 N Channel MOS Field effect transistor입니다. This planar stripe MOSFET has better characteristics, such as fast switching time, low on resistance, low gate charge and excellent avalanche characteristics. It is mainly suitable for DC/DC Converters and switching mode power supplies.( Vdss=250V, Id=13A )

KEC
KEC

DataSheet.kr    |   2018   |  연락처   |  링크모음   |   검색  |   사이트맵