Datasheet.kr   

M208-A8 데이터시트 PDF




CMOS Sensor에서 제조한 전자 부품 M208-A8은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 M208-A8 자료 제공

부품번호 M208-A8 기능
기능 Contact Image Sensor Module
제조업체 CMOS Sensor
로고 CMOS Sensor 로고


M208-A8 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 8 페이지수

미리보기를 사용할 수 없습니다

M208-A8 데이터시트, 핀배열, 회로
Preliminary
Contact Image Sensor
(CIS) Module
Product Name
M208-A8
Approval
Notes
CMOS Sensor Inc.
20045 Stevens Creek Blvd.,
Suite 1A
Cupertino, CA., 95014
Tel: (408) 366-2898
Fax: (408) 366-2698
Approved Checked Designed
Issued
Revision no.
All specifications of this device are subject to change without notice.
20045 Stevens Creek Blvd., Suite 1A, Cupertino, CA., 95014
Tel: (408) 366-2898, Fax: (408) 366-2698




M208-A8 pdf, 반도체, 판매, 대치품
Functional block diagram:
10
VLED
9
GLED
LED light source
Selfoc rod lens array
1 2 3 4 Photo-detector array 1725 1726 1727 1728
Shift register & multiplexing switch
Buffer
analog switch & OP amplifier
68
φSP φCP
3
257
4
VDD Gnd Gnd Gnd Vss
Figure 2 Functional block diagram of M100-A6.
Pins Description:
1
Vout
Pin #
1
2
3
4
5
6
7
8
Symbol
VOUT
GND
VDD
SP
VREF
CP
GLED
VLED
Description
Output video signal
Ground 0V
Module power supply voltage (+5V)
Start pulse input
Reference voltage (input)
Clock pulse input
LED power supply ground; 0V
LED power supply voltage; 5 V
20045 Stevens Creek Blvd., Suite 1A, Cupertino, CA., 95014
Tel: (408) 366-2898, Fax: (408) 366-2698

4페이지










M208-A8 전자부품, 판매, 대치품
PRODUCT RELIABILITY TESTS
Items of Test
Life Test
High Temp Test
Low Temp Test
Temp/Humidity
Test
Temp Cycling
Drop Test
Vibration Test
Testing Conditions
Temp = 25 ± 5 °C,
Humidity = 20 ~ 80 RH%
Time = 2000 hrs
Temp = 80 ± 5 °C
Time = 144 hrs
Temp = -30 ± 5 °C
Time = 144 hrs
Temp = 50 ± 5 °C,
Humidity = 85 ± 5 RH%
Time = 144 hrs
Temp = -30, 25, 80 °C
Time = 30, 5, 30 min.
Cycles = 10, 50
Packaged product drops
from 1 m height.
Perform test for 3 sides.
Cycling: 10 ~ 50 ~ 10 Hz
Cycle time = 1 min
Amp = 2 mm,Time = 1 Hr
Inspection items
Vp, Vd: the change
of Vp, Vd respectively
after the life testing.
electrical parameters,
module structures.
Vp: the change of Vp
after the life testing.
Electrical parameters,
Module structures.
Pass Criterions
-30 % < Vp < 10 %
-25 mV < Vd < 15mV
Parameters must be
within specs, no
change, no damage
in module structures
-30%< Vp < 10%
All electrical
parameters must be
within the specs.
No distortion and
damage on module.
Precautions before use:
1. Dirty Glass Surface:
The glass surface should be kept clean.
Do not wipe the sensor by hand or use in a dust polluted environment. Should the glass
surface become dirty, soak a cloth lightly alcohol and wipe the surface gently.
Care should be taken so as not to scratch the surface while wiping it. Any loose dust
lying on the sensor surface can be cleaned using an air gun.
2. Dust and the CIS unit
The unit is housed in an air tight structure to protect it from dust. The side plates should
be removed, otherwise dust may enter the unit. When using the side holes to fix the
sensor, insert the screws slowly until tight, so as not to damage the screw hole thread.
20045 Stevens Creek Blvd., Suite 1A, Cupertino, CA., 95014
Tel: (408) 366-2898, Fax: (408) 366-2698

7페이지


구       성 총 8 페이지수
다운로드[ M208-A8.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
M208-A4

Contact Image Sensor Module

CMOS Sensor
CMOS Sensor
M208-A6

Contact Image Sensor Module

CMOS Sensor
CMOS Sensor

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵