|
|
PDF CS5800P-04 Data sheet ( Hoja de datos )
| Número de pieza | CS5800P-04 | |
| Descripción | 3CCD Color Camera Operation Manual | |
| Fabricantes | TOKYO ELECTRONIC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CS5800P-04 (archivo pdf) en la parte inferior de esta página. Total 25 Páginas | ||
|
No Preview Available !
3CCD Color Camera
CS5800-04 / CS5800P-04
Operation Manual
Thank you for purchasing our CS5800-04 / 5800P-04 CCD color camera.
This operation manual includes some important information such as how to use this
equipment correctly and safely. Please read through this manual carefully. After
reading, keep this manual by the side of your equipment for your future reference.
TOKYO ELECTRONIC INDUSTRY CO., LTD
1 page  
CAUTION
CAUTION
CAUTION
CAUTION
If the camera is operated in the electromagnetic field, there may be cases where beat noises
(vertical, horizontal, or oblique stripes) appear in the video output. In that case, take
preventive measures on the electromagnetic-wave generating source so that your camera
does not receive the interference by the electromagnetic wave. Take extra precautions
against electromagnetic-wave-interference if your camera is used with a servomotor,
inverter, or other electromagnetic-wave-generating equipment.
Avoid giving a strong shock against the camera body. It might cause a breakdown or
damage. If your camera is used in a system where its camera head is subjected to strong
repetitive shocks, its camera head is possible to break down. If you intend to use your
camera in such a situation, make sure to use an optional
camera-connector-fixing-hardware to connect the connector-plug to the camera body.
Do NOT connect/disconnect connectors before turning power off.
Make sure to check the CCU power is OFF before connecting/disconnecting connectors.
Otherwise, you might get an electric shock, or your camera might break down.
Do not pull strongly the camera cable/camera-head nor swing it. The stress from pulling or
swinging may cause damage in the coating of the cable, or breaks in the inside wires.
CAUTION
Avoid short-circuiting signal output. Otherwise, it may cause a malfunction.
CAUTION
Do NEVER aim its camera image pick up plane toward the sun regardless of the use
situation. Otherwise, its inner image pickup device might get damaged.
CAUTION
CAUTION
CAUTION
Do NOT expose your device to direct sunlight, nor intensive heat.
Do NOT place this device where it is exposed to direct sunlight, or in a high
temperature condition. To do so may cause the inner temperature of the device to go up,
resulting in burning-down of inner parts, circuits or a fire accident.
When mounting a lens, take extra caution so that the lens is not tilted, nor does flaw
exist at the lens-mount-screw part. Also check to confirm that neither dirt nor other
foreign object is put inside. Improper mounting might cause the parts to become
locked.
Caution
Do NOT block ventilating slits.
You should avoid;
Placing your device upside down, or with wrong side up.
Installing your device in a poor natural draft condition, recessed area.
Placing your device on carpet, cushion.
Putting a tablecloth, curtain on your device.
Blocking the ventilation slits prevents inner heat from escaping, which might lead to a
fire accident.
Must
Wastes of this product should be separated and discarded in compliance with the various
national and local ordinances.
4
5 Page 
5.2 Connection between CCU and peripheral equipment
Connect CCU and peripheral equipment
BNC cable
S terminal cable
RGB cable
Video monitor
GND
DC12V IN
Power cable
CCU rear
Caution in the connection
♦ Make sure that the power of this camera and peripheral equipment is turned off.
♦ Plug in the cable for connection securely with correct orientation.
♦ Make sure that video output is properly 75-ohm terminated.
10
11 Page | ||
| Páginas | Total 25 Páginas | |
| PDF Descargar | [ Datasheet CS5800P-04.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CS5800P-04 | 3CCD Color Camera Operation Manual | TOKYO ELECTRONIC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |