Datasheet.kr   

AGN20006 데이터시트 PDF




Nais에서 제조한 전자 부품 AGN20006은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 AGN20006 자료 제공

부품번호 AGN20006 기능
기능 ULTRA-SMALL PACKAGE SLIM POLARIZED RELAY
제조업체 Nais
로고 Nais 로고


AGN20006 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 4 페이지수

미리보기를 사용할 수 없습니다

AGN20006 데이터시트, 핀배열, 회로
GNTESTING
ULTRA-SMALL PACKAGE
GN-RELAYSSLIM POLARIZED RELAY
10.60±0.3
.417±.012
5.70±0.3
.224±.012
9.00±0.3
.354±.012
10.60±0.3
.417±.012
5.70±0.3
.224±.012
Max.10.00
.394
mm inch
FEATURES
• Compact slim body saves space
Thanks to the small surface area of 5.7
mm × 10.6 mm .224 inch × .417 inch and
low height of 9.0 mm .354 inch, the pack-
aging density can be increased to allow
for much smaller designs.
• Outstanding surge resistance.
Surge withstand between open contacts:
1,500 V 10×160 µs (FCC part 68)
Surge withstand between contacts and
coil: 2,500 V 2×10 µs (Bellcore)
• The use of twin crossbar contacts en-
sures high contact reliability.
AgPd contact is used because of its good
sulfide resistance. Adopting low-gas
molding material. Coil assembly molding
technology which avoids generating vola-
tile gas from coil.
• Increased packaging density
Due to highly efficient magnetic circuit de-
sign, leakage flux is reduced and changes
in electrical characteristics from compo-
nents being mounted close-together are
minimized. This all means a packaging
density higher than ever before.
• Nominal operating power: 140 mW
• Outstanding vibration and shock re-
sistance.
Functional shock resistance:
750 m/s2 {75G}
Destructive shock resistance:
1,000 m/s2 {100G}
Functional vibration resistance:
10 to 55 Hz (at double amplitude of 3.3
mm .130 inch)
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of 5 mm
.197 inch)
SPECIFICATIONS
Contact
Arrangement
2 Form C
Initial contact resistance, max.
(By voltage drop 6 V DC 1A )
100 m
Contact material
Stationary: AgPd+Au clad
Movable: AgPd
Nominal switching capacity
(resistive load)
1 A 30 V DC
0.3 A 125 V AC
Rating
Max. switching power
(resistive load)
Max. switching voltage
30 W, 37.5 V A
110 V DC, 125 V AC
Max. switching current
Min. switching capacity f1
1A
10 µA 10 mV DC
Nominal
operating
power
Single side stable
1 coil latching
140mW (1.5 to 12 V DC)
230mW (24 V DC)
100mW (1.5 to 12 V DC)
120mW (24 V DC)
Mechanical (at 180 cpm)
5 × 107
Expected
life (min.
operations)
Electrical
(at 20 cpm)
1 A 30 V DC
resistive
0.3 A 125 V AC
resistive
105
105
Remarks:
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as "Initial breakdown voltage" section.
*2 Detection current: 10mA.
*3 Nominal voltage applied to the coil, excluding contact bounce time.
*4 By resistive method, nominal voltage applied to the coil; contact carrying current:
1 A.
*5 Half-wave pulse of sine wave: 6 ms; detection time: 10µs.
*6 Half-wave pulse of sine wave: 6 ms.
*7 Detection time: 10µs.
*8 Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 61)
Characteristics
Initial insulation resistance*1
Min. 1,000M(at 500V DC)
Initial
breakdown
voltage*2
Between open contacts
Between contact sets
Between contacts and coil
750 Vrms for 1min.
1,000 Vrms for 1min.
1,500 Vrms for 1min.
Initial surge
voltage
Between open contacts
(10×160 µs)
Between contacts and coil
(2×10 µs)
1,500 V (FCC Part 68)
2,500 V (Bellcore)
Operate time [Set time]*3 (at 20°C)
Max. 4 ms (Approx. 2 ms)
[Max. 4 ms (Approx. 2 ms)]
Release time (without diode)
[Reset time]*3 (at 20°C)
Max. 4 ms (Approx. 1 ms)
[Max. 4 ms (Approx. 2 ms)]
Temperature rise*4 (at 20°C)
Max. 50°C
Shock resistance
Functional*5
Destructive*6
Min. 750 m/s2{75G]
Min. 1,000 m/s2{100G]
Vibration resistance
Functional*7
Destructive
10 to 55 Hz at double
amplitude of 3.3 mm
10 to 55 Hz at double
amplitude of 5 mm
Conditions for opera- Ambient
tion, transport and temperature f2
storage*8
(Not freezing and con-
densing at low tem- Humidity
perature)
–40°C to 85°C
–40°F to 185°F
5 to 85% R.H.
Unit weight
Approx. 1 g.035 oz
Notes:
f1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
f2 The upper limit for the ambient temperature is the maximum temperature that
can satisfy the coil temperature rise. Under the packing condition, allowable
temperature range is from –40 to +70°C –40° to +158°F.
125




AGN20006 pdf, 반도체, 판매, 대치품
GN
NOTES
1. Coil operating power
1) As a general rule, only a pure DC pow-
er supply should be used for the coil drive.
2) To ensure proper operation, the voltage
applied to both terminals of the coil should
be ±5% (at 20°C 68°F) the rated operating
voltage of the coil. Also, be aware that the
pick-up and drop-out voltages will fluctu-
ate depending on the ambient tempera-
ture and operating conditions.
3) The ripple factor for the voltage applied
to the coil should be less than 5%.
4) For set and reset latching relays, the
rated operating voltage should be applied
to the coil for 10 ms or more.
2. Coil connection
When connecting coils, refer to the wiring
diagram to prevent mis-operation or mal-
function.
3. External magnetic field
Since GN relays are highly sensitive po-
larized relays, their characteristics will be
affected by a strong external magnetic
field. Avoid using the relay under that con-
ditions.
4. Cleaning
In automatic cleaning, cleaning with the
boiling method is recommended. Avoid ul-
trasonic cleaning which subjects the relay
to high frequency vibrations. It may cause
the contacts to stick.
lt is recommended that a fluorinated hy-
drocarbon or other alcoholic solvent be
used.
5. Packing style
1) The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the figure below.
Orientation (indicates PIN No.1)stripe
Stopper (green)
Stopper (red)
2) Tape and reel packing
(A type)
(1)-1 Tape dimensions
mm inch
Relay polarity bar
(Z type)
0.40
1.50
+0.1
0
dia
.059
+.004
0
dia
.016
4.00
.157
2.00
.079
11.50
.453
1.75
.069
24.00±0.3
11.10 .945±.012
.437
10.70±0.2
.421±.008
GN relays
2.00dia
.079dia
16.00
.630
8.00
.315
Tape coming out direction
General tolerance ±0.1 mm .004 inch
(S type)
(1)-2 Tape dimensions
Relay polarity bar
(Z type)
2.00
1.50
+0.1
0
dia
.079
.059
+.004
0
dia
4.00 2.0dia
.157 .079dia
1.75
.069
10.70±0.2
.421±.008
0.40
.016
11.50
.453 24.00±0.3
11.10 .945±.012
.437
GN relays
16.00
6.3
.630 .248
Tape coming out direction
General tolerance ±0.1 mm .004 inch
(2) Dimensions of plastic peel
mm inch
21±0.8 dia.
.827±.031 dia.
2.0±0.5
.079±.020
100±1 dia.
3.937±.039 dia.
370±2 dia.
14.567±.079 dia.
13±0.2 dia.
.512±.008 dia.
24.4
+2
0
.961
+.079
0
2.0±0.2
.079±.008
6. Automatic insertion
To maintain the internal function of the
relay, the chucking pressure should not
exceed the values below.
Chucking pressure in the direction A:
4.9 N {500gf} or less
Chucking pressure in the direction B:
9.8 N {1 kgf} or less
Chucking pressure in the direction C:
9.8 N {1 kgf} or less
C
A
B
Please chuck the portion.
Avoid chucking the center of the relay.
In addition, excessive chucking pressure
to the pinpoint of the relay should be
avoided.
For Cautions for Use, see Relay Technical Information (Page 48 to 76).
91/12/82000
All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.
Go To Online Catalog

4페이지












구       성 총 4 페이지수
다운로드[ AGN20006.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
AGN20003

(AGN2xx) ULTRA-SMALL PACKAGE SLIM POLARIZED RELAY

Matsushita Electric
Matsushita Electric
AGN20006

GN RELAYS

Panasonic
Panasonic

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵