Datasheet.kr   

2.2K3A1IA 데이터시트 PDF




BetaTHERM에서 제조한 전자 부품 2.2K3A1IA은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 2.2K3A1IA 자료 제공

부품번호 2.2K3A1IA 기능
기능 Chip Thermistors
제조업체 BetaTHERM
로고 BetaTHERM 로고


2.2K3A1IA 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 2 페이지수

미리보기를 사용할 수 없습니다

2.2K3A1IA 데이터시트, 핀배열, 회로
BetaTHERM Sensors
BetaCurve Interchangeable Thermistor Series II
BetaCurve Interchangeable Thermistor Series II
.
Thermistor Configuration
30 AWG Sliver Plated
Copper Lead Wires
With Etched
TFE Telfon Insulation,
Thermally Conductive
Epoxy Coating
12.7mm +/-3.3mm
(0.50Ó +/-0.13Ó)
76.2mm +/-3.3mm
(3.00Ó +/-3.13Ó)
2.413mm
(0.095Ó)
Max. Dia.
Example: BetaCURVE Series II Part Number
10K 3 A 1 I A
Tolerance Classification
Insulated Lead Wires
BetaCURVE Series
Epoxy Coated
Material Curve #
Resistance Value
@
25oC
Applications
¥ Temperature sensing, control and compensation.
¥ P.C. board mounting for over temperature
protection.
¥ Automotive car seat heater control and engine
management.
¥ Assembly into probes for a wide variety of
applications in industrial temperature control and
instrumentation.
Features
¥ Rapid Time Response (1 second typical in liquids).
¥ DC (Dissipation Constant) = 0.85mW/ oC
typical in still air at 25oC.
¥ Min./Max. Temperature Exposure = -80 to 150oC.
¥ Available in custom probe assemblies.
¥ Proven Stability and Reliability.
¥ Teflon Insulated lead wires.
¥ Choice of 4 temperature tolerance classifications:
Tolerance Code:
A
B
C
D
Specification:
+/-0.1oC, 0oC to 70oC
+/-0.2oC, 0oC to 70oC
+/-0.5oC, 0oC to 70oC
+/-1.0oC, 0oC to 70oC
Similar to the BetaCURVE Thermistor Series I, the
Series II thermistors are small epoxy coated devices. The
same quality thermistor elements are used during assembly.
Series II are manufactured using 30 AWG teflon insulated
lead wires. They offer the same choice of precision
temperature tolerance classifications for a wide variety of
customer applications.
The Series II differs from Series I marginally with
respect to D.C. The typical value of 0.85mW/oC in still air
at 25oC is due to the larger lead wire diameter made of pure
copper.
The insulated lead wires offer customers the added
protection of TFE teflon insulation that has the highest
temperature rating (150oC) of the most common insulating
materials. TFE teflon is a material that does not bond easily
with epoxies or adhesives. For this reason the surface of the
teflon wire is etched, which enhances bondability for
applications that require mounting or potting the thermistor
with epoxies or adhesives.
The series is produced in high volume as a
Standard configuration. Other configurations are available
on a custom basis. Larger or smaller lead wires can be used
with the same chip elements and with insulating materials of
PVC, Kynar, Tefzel, Nylon/Polyurethane, etc. Contact
Applications Engineering Group for support if requirements
differ from the standard configuration as shown above.
BETA ApS (DK + NO): Phone: +45 59 31 11 88, Fax: +45 59 31 12 10, email: [email protected]
4 BEATA Komponent AB (SE): Phone: +46 (0)392 360 40, Fax: +46 (0)392 360 41, e-mail: [email protected]
BETA Finland OY (FI): Phone: +358 (0)9 260 9209, Fax: +358 (0)9 260 9208, e-mai: [email protected]
url: www.beta.dk, www.beata.se, www.betafinland.fi, www.betatherm.com





구       성 총 2 페이지수
다운로드[ 2.2K3A1IA.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
2.2K3A1IA

Chip Thermistors

BetaTHERM
BetaTHERM

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵