Datasheet.kr   

E3M-VG16 데이터시트 PDF




Omron에서 제조한 전자 부품 E3M-VG16은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 E3M-VG16 자료 제공

부품번호 E3M-VG16 기능
기능 Color Mark Sensor
제조업체 Omron
로고 Omron 로고


E3M-VG16 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 14 페이지수

미리보기를 사용할 수 없습니다

E3M-VG16 데이터시트, 핀배열, 회로
R
Color Mark Sensor with Teach Function
E3M-V
High-speed Registration Mark
Detection
H Fast 50 µs response
H Pushbutton programming for quick
setup
H Remote control setup for on-the-fly
adjustments
H Green LED detects yellow-on-white and
other difficult color combinations
H Stable operation even on shiny surfaces
H IP67 watertight construction
Ordering Information
J SENSOR
Shape
Sensing
distance
10 ±3 mm
Light source
Green LED
(525 nm)
Output
NPN
Spot size (W x H) and
orientation
1 x 4 mm
4 x 1 mm
PNP 1 x 4 mm
4 x 1 mm
Part number
(Quick-disconnect)
E3M-VG11
Part number
(Pre-leaded)
E3M-VG17
E3M-VG21
E3M-VG27
E3M-VG16
E3M-VG26
E3M-VG12
E3M-VG22
J MOUNTING BRACKETS
Order mounting brackets separately. These are not included with the sensor.
Shape
Part number
E39-L131
E39-L132
2




E3M-VG16 pdf, 반도체, 판매, 대치품
E3M-V
E3M-V
J INSTALLATION
Glossy Target Objects
Incline the Sensor for glossy objects to reduce mirror reflection for
stable sensing operation.
A
A
B
5 to 15°
Target object
E3M-VG1j
B
5 to 15°
Target object
E3M-VG2j
J STANDARD TARGET OBJECT
(COLOR VS. MUNSELL)
11 standard colors Munsell color notation
White
N9.5
Red
Yellow red
4R, 4.5/12.0
4YR, 6.0/11.5
Yellow
5Y, 8.5/11.0
Yellow green
Green
3GY, 6.5/10.0
3G, 6.5/9.0
Blue green
Blue
5BG, 4.5/10.0
3PB, 5.0/10.0
Purple
Red purple
Black
7P, 5.0/10.0
6RP, 4.5/12.5
N2.0
View AA
View BB
5

4페이지










E3M-VG16 전자부품, 판매, 대치품
E3M-V
E3M-V
J OPERATING PROCEDURE
Adjustment Steps
1. Install, wire, and turn ON the E3M-V.
2. Perform teaching (mark registration). Refer to Mark Registration (Teaching).
3. Make fine adjustments of the threshold level if necessary. Refer to Threshold Level Adjustments.
4. Check that the mode selector is set to RUN.
Mark Registration (Teaching)
Refer to the following for ideal teaching.
Application
The base has a
color pattern. The
mark and base are
clearly different in
color.
The base has no
color pattern. The
mark and base are
slightly different in
color.
The base has no
color pattern.
Remote teaching
with no positioning
is desired.
Two-point Teaching
1 Set the mode selector to TEACH.
2 Locate the mark to the sensing position and press the SET
button. All the red threshold indicators will turn ON.
Sensor
Mark
One-point teaching
The default level is
set and the output
is ON when the
mark is detected.
Two-points
teaching
The threshold level
is set between the
color of the mark
and base. The
output is ON when
the mark is
detected.
Auto-teaching
The threshold level
is set between
color of the mark
and base. The
output is ON when
the mark (i.e., the
color with shorter
passing time) is
detected.
Refer to the following for each teaching method. Remote one- or
two-point teaching is possible. Refer to Remote Control Function.
One-point Teaching
1 Set the mode selector to TEACH.
2 Locate the mark to the sensing position and press the SET
button. Then all the red threshold indicators are ON.
Sensor
Base
Push
Red threshold indicators are ON.
3 If teaching is successful, move the mark and press the
SET button at the base.
If teaching is successful, all the green detection level
indicators are ON.
If teaching is unsuccessful, all the red threshold level
indicators flash.
Green detection level
indicators are ON.
Sensor
Mark
Base
Push
Teaching
is OK
All the red threshold level
indicators will flash if there
is no difference in incident.
Mark
Base
Push
Teaching is NG
Red threshold indicators are ON
3 Set the mode selector to RUN. The output will be ON
whenever the set mark is detected.
Note: By teaching on the base, reversed output as shown above
(base: ON, mark: OFF) can be obtained.
4 If teaching is successful, set the mode selector to RUN to
complete the teaching operation. If teaching is
unsuccessful, restart from the above step 2.
Note: Follow the above steps so that the output will be turned
ON whenever the mark is detected. By taking the opposite
steps, the output will be turned OFF whenever the mark is
detected and turned ON whenever the base is detected.
8

7페이지


구       성 총 14 페이지수
다운로드[ E3M-VG16.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
E3M-VG11

Color Mark Sensor

Omron
Omron
E3M-VG12

Color Mark Sensor

Omron
Omron

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵