DataSheet.es    


PDF SMA6823MP Data sheet ( Hoja de datos )

Número de pieza SMA6823MP
Descripción High Voltage 3-Phase Motor Driver
Fabricantes Sanken 
Logotipo Sanken Logotipo



Hay una vista previa y un enlace de descarga de SMA6823MP (archivo pdf) en la parte inferior de esta página.


Total 13 Páginas

No Preview Available ! SMA6823MP Hoja de datos, Descripción, Manual

SMA6823MP
High Voltage 3-Phase Motor Driver
Features and Benefits
Built-in pre-drive IC and 3 bootstrap diodes as a high-side
drive power supply
CMOS compatible input (5 V)
High-side gate driver using bootstrap circuit or floating
power supply
One pin for 7.5 V regulator output
Built-in protection circuit for controlling power supply
voltage drop
Built-in overheat detection circuit (TD)
Output of fault signal during operation of protection circuit
Output current 2.5 A
Small SIP (SMA 24-pin)
Packages: Power SIP
Not to scale
Leadform 2451
Leadform 2452
Description
The SMA6823MP inverter power module (IPM) device
provides a robust, highly-integrated solution for optimally
controlling 3-phase motor power inverter systems and variable
speed control systems used in energy-conserving designs to
drive motors of residential and commercial appliances. These
ICs take 230 VAC input voltage, and 2.5 A (continuous) output
current. They can withstand voltages of up to 500 V (MOSFET
breakdown voltage).
The SMA6820MP power package includes an IC with all of
the necessary power elements (six MOSFETs) and pre-driver
ICs (two) needed to configure the main circuit of an inverter.
This enables the main circuit of the inverter to be configured
with fewer external components than traditional designs.
Applications include residential white goods (home
applications) and commercial appliance motor control:
• Air conditioner fan
• Refrigerator compressor
• Dishwasher pump
Functional Block Diagram
VB 1
VB 2
VB 3
VD
VCC1
HIN1
HIN2
HIN3
COM1
UVLO
Input
Logic
UVLO UVLO UVLO
High Side
Level Shift Driver
VCC2
VREG
LIN1
LIN2
LIN3
COM2
FO
7.5V
Reg.
UVLO
Input
Logic
Thermal
Detect
Low Side
Driver
VBB 1
VBB 2
U
V
W1
W2
LS2
LS1
Figure 1. Driver block diagrams.
28610.07

1 page




SMA6823MP pdf
SMA6823MP
High Voltage 3-Phase Motor Driver
High Side Driver Input/Output Timing Diagrams
HIN
VUVHH
VB-HS
HO
VUVHL
UVLO
Release
After UVLO is released, IC operation is started by the first rising edge of input
Low Side Driver Input/Output Timing Diagrams
LIN
VCC
VUVHH
LO
VUVHL
UVLO
Release
FO
TJ
TDH
After UVLO is released, IC operation is started by the first rising edge of input
TDL
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
5

5 Page





SMA6823MP arduino
SMA6823MP
High Voltage 3-Phase Motor Driver
WARNING — These devices are designed to be operated at lethal voltages and energy levels. Circuit designs
that embody these components must conform with applicable safety requirements. Precautions must be
taken to prevent accidental contact with power-line potentials. Do not connect grounded test equipment.
The use of an isolation transformer is recommended during circuit development and breadboarding.
Because reliability can be affected adversely by improper storage
environments and handling methods, please observe the following
cautions.
Cautions for Storage
• Ensure that storage conditions comply with the standard
temperature (5°C to 35°C) and the standard relative humidity
(around 40 to 75%); avoid storage locations that experience
extreme changes in temperature or humidity.
• Avoid locations where dust or harmful gases are present and
avoid direct sunlight.
• Reinspect for rust on leads and solderability of products that have
been stored for a long time.
Cautions for Testing and Handling
When tests are carried out during inspection testing and other
standard test periods, protect the products from power surges
from the testing device, shorts between adjacent products, and
shorts to the heatsink.
Remarks About Using Silicone Grease with a Heatsink
When silicone grease is used in mounting this product on a
heatsink, it shall be applied evenly and thinly. If more silicone
grease than required is applied, it may produce stress.
Volatile-type silicone greases may permeate the product and
produce cracks after long periods of time, resulting in reduced
heat radiation effect, and possibly shortening the lifetime of the
product.
Our recommended silicone greases for heat radiation purposes,
which will not cause any adverse effect on the product life, are
indicated below:
Type
Suppliers
G746
Shin-Etsu Chemical Co., Ltd.
YG6260
Momentive Performance Materials, Inc.
SC102
Dow Corning Toray Silicone Co., Ltd.
Soldering
• When soldering the products, please be sure to minimize the
working time, within the following limits:
260±5°C 10 s
380±10°C 5 s
Soldering iron should be at a distance of at least 1.5 mm from the
body of the products
Electrostatic Discharge
• When handling the products, operator must be grounded.
Grounded wrist straps worn should have at least 1 MΩ of
resistance to ground to prevent shock hazard.
• Workbenches where the products are handled should be
grounded and be provided with conductive table and floor mats.
• When using measuring equipment such as a curve tracer, the
equipment should be grounded.
• When soldering the products, the head of soldering irons or the
solder bath must be grounded in other to prevent leak voltages
generated by them from being applied to the products.
• The products should always be stored and transported in our
shipping containers or conductive containers, or be wrapped in
aluminum foil.
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
11

11 Page







PáginasTotal 13 Páginas
PDF Descargar[ Datasheet SMA6823MP.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SMA6823MPHigh Voltage 3-Phase Motor DriverSanken
Sanken

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar