|
|
|
부품번호 | GA2972-AL 기능 |
|
|
기능 | SMT PFC Boost Inductor | ||
제조업체 | Coilcraft | ||
로고 | |||
Document 657 -1
SMT PFC Boost Inductor For ON Semiconductor
NCP1606 PFC Controller
• Designed to operate in 100 Watt applications.
• Referenced as LBOOST in application note AND8282/D.
• Auxiliary winding provides zero current detection (ZCD)
information and can also supply power to the NCP1606.
• 500 Vrms winding to winding and winding to core isolation
Core material Ferrite
Terminations RoHS compliant tin-silver over tin over nickel
over phos bronze. Other terminations available at additional cost.
Weight 27 g
Ambient temperature –40°C to +85°C with Irms current, +85°C
to +125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C
/ 85% relative humidity)
Mean Time Between Failures (MTBF) 26,315,789 hours
Packaging 50/13″ reel Plastic tape: 56 mm wide, 0.5 mm thick,
36 mm pocket spacing, 14.45 mm pocket depth
PCB washing Only pure water or alcohol recommended
Part
number1
Inductance2
±10% (µH)
GA2972-AL_
330
DCR max (Ohms)
pri aux
0.30 0.35
SRF3
(MHz)
1.2
Turns ratio
pri : aux
8:1
Isat (A)4
Irms(A)5
10% drop 20% drop 30% drop 20°Crise 40°Crise
4.2 4.5 4.8 1.7 2.3
1. When ordering, please specify packaging code:
GA2972-ALD
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (50 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter D instead.
2. Inductance measured at 100 kHz, 1.1 Vrms, 0 Adc using an Agilent/
HP 4263B impedance analyzer or equivalent.
3. SRF tested on an Agilent/HP 4192A.
4. DC current at which the inductance drops the specified amount from
its value without current.
5. Current that causes the specified temperature rise from 25°C
ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
01.545,01max
Dot indicates pin 1
1.169
29,7
1.26
32,0
max
0.004 / 0,10
2 Pri 1
5 Aux 4
5
216.0,962max
1.024
26,0
0.043
1,1
6
0.085
2,16
1
1.160
29,45
Recommended
Land Pattern
1
Dimensions are in
inches
mm
10 0.197
5,0
0.197
5,0
0.083
2,11
© Coilcraft, Inc. 2008
These parts are preproduction products for electrical evaluation
only. Specification subject to change without notice.
Document 657-1 Revised 06/23/08
| |||
구 성 | 총 2 페이지수 | ||
다운로드 | [ GA2972-AL.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
GA2972-AL | SMT PFC Boost Inductor | Coilcraft |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |