|
|
|
부품번호 | DCS800 기능 |
|
|
기능 | Drives Hardware Manual | ||
제조업체 | ABB | ||
로고 | |||
전체 30 페이지수
DCS800
Hardware Manual
DCS800 Drives (20 to 5200 A)
3ADW000194R0611 DCS800 Hardware Manual f us
4페이지 7
WARNING! The printed circuit boards contain components sensitive to electrostatic
discharge. Wear a grounding wrist band when handling the boards. Do not touch the
boards unnecessarily.
Grounding
These instructions are intended for all who are responsible for the grounding of the
drive. Incorrect grounding can cause physical injury, death or equipment malfunction
and increase electromagnetic interference.
• Ground the drive, motor and adjoining equipment to ensure personnel safety in
all circumstances, and to reduce electromagnetic emission and pick-up.
• Make sure that grounding conductors are adequately sized as required by
safety regulations.
• In a multiple-drive installation, connect each drive separately to protective
earth (PE).
• Minimize EMC emission and make a 360° high frequency grounding of
screened cable entries at the cabinet lead-through.
• Do not install a drive with EMC filter on an ungrounded power system or a high
resistance-grounded (over 30 ohms) power system.
Note:
• Power cable shields are suitable for equipment grounding conductors only
when adequately sized to meet safety regulations.
• As the normal leakage current of the drive is higher than 3.5 mA AC or 10 mA
DC (stated by EN 50178, 5.2.11.1), a fixed protective earth connection is
required.
3ADW000194R0611 DCS800 Hardware Manual f us
Safety instructions
7페이지 | |||
구 성 | 총 30 페이지수 | ||
다운로드 | [ DCS800.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
DCS800 | Drives Quick Guide | ABB |
DCS800 | DC Drive Technical catalogue | ABB |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |