|
|
PDF DTA124E Data sheet ( Hoja de datos )
| Número de pieza | DTA124E | |
| Descripción | PNP -100mA -50V Digital Transistors | |
| Fabricantes | ROHM Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de DTA124E (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
DTA124E series
PNP -100mA -50V Digital Transistors (Bias Resistor Built-in Transistors)
Datasheet
Parameter
VCC
IC(MAX.)
R1
R2
Value
50V
100mA
22k
22k
Features
1) Built-In Biasing Resistors, R1 = R2 = 22k.
2) Built-in bias resistors enable the configuration of
an inverter circuit without connecting external
input resistors (see equivalent circuit).
3) The bias resistors consist of thin-film resistors
with complete isolation to allow negative biasing
of the input. They also have the advantage of
completely eliminating parasitic effects.
4) Only the on/off conditions need to be set for
operation, making the circuit design easy.
5) Complementary NPN Types :DTC124E series
6) Complex transistors :UMA1N/ FMA1A （PNP type）
7) Lead Free/RoHS Compliant.
Application
Switching circuit, Inverter circuit, Interface circuit,
Driver circuit
Outline
VMT3
OUT
IN
GND
DTA124EM
(SC-105AA)
EMT3
OUT
IN
GND
DTA124EE
SOT-416 (SC-75A)
UMT3
OUT
IN
GND
DTA124EUA
SOT-323 (SC-70)
Inner circuit
R1
IN
R2
EMT3F
OUT
IN
GND
DTA124EEB
(SC-89)
UMT3F
OUT
IN
GND
DTA124EUB
(SC-85)
SMT3
OUT
IN
GND
DTA124EKA
SOT-346 (SC-59)
OUT
GND(+)
IN OUT
Packaging specifications
Part No.
Package
DTA124EM
DTA124EEB
DTA124EE
DTA124EUB
DTA124EUA
DTA124EKA
VMT3
EMT3F
EMT3
UMT3F
UMT3
SMT3
Package
size
(mm)
1212
1616
1616
2021
2021
2928
Taping
code
T2L
TL
TL
TL
T106
T146
GND(+)
Reel size
(mm)
Tape width
(mm)
Basic
ordering
unit (pcs)
180 8 8,000
180 8 3,000
180 8 3,000
180 8 3,000
180 8 3,000
180 8 3,000
Marking
15
15
15
15
15
15
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
1/10
2012.03 - Rev.A
1 page  
DTA124E series
Dimensions (Unit : mm)
VMT3
D
b1
Ac
Data Sheet
eb
x SA
b3
S
b2 e
Patterm of terminal position areas
DIM
MILIMETERS
MIN MAX
A 0.45
0.55
A1 0.00
0.10
b 0.17
0.27
b1 0.27
0.37
c 0.08
0.18
D 1.10
1.30
E 0.70
0.90
e 0.40
HE 1.10
1.30
L 0.10
0.30
Lp 0.20
0.40
x-
0.10
INCHES
MIN MAX
0.018
0.022
0 0.004
0.007
0.011
0.011
0.015
0.003
0.007
0.043
0.051
0.028
0.035
0.02
0.043
0.051
0.004
-
0.008
-
- 0.004
DIM
MILIMETERS
MIN MAX
e1 0.80
b2 -
0.37
b3 -
0.47
l1 -
0.50
Dimension in mm/inches
INCHES
MIN MAX
0.03
- 0.015
- 0.019
- 0.02
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
5/10
2012.03 - Rev.A
5 Page 
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
R1120A
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet DTA124E.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| DTA124 | DIGITAL TRANSISTOR | ROHM Semiconductor |
| DTA124E | PNP SILICON BIAS RESISTOR TRANSISTOR |  ON Semiconductor |
| DTA124E | PNP DIGITAL TRANSISTOR |  Unisonic Technologies |
| DTA124E | PNP -100mA -50V Digital Transistors | ROHM Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |