TL-T2E2 Datasheet PDF - Omron
| Part Number | TL-T2E2 | |
| Description | Slim Proximity Sensor | |
| Manufacturers | Omron | |
| Logo |  |
|
|
There is a preview and TL-T2E2 download ( pdf file ) link at the bottom of this page. Total 14 Pages | ||
Preview 1 page No Preview Available !
Slim Proximity Sensor
TL-T
Slim Model of Width 12 mm.
• Ideal for side-by-side mounting.
Be sure to read Safety Precautions on page 5.
Ordering Information
Appearance
Sensing distance
Output specifications
Model
Output configuration
Shielded
2 mm
DC 3-wire models
AC 2-wire models
NPN
PNP
NO
TL-T2E1
TL-T2F1
TL-T2Y1
NC
TL-T2E2
---
TL-T2Y2
Unshielded
5 mm
DC 3-wire models NPN
AC 2-wire models
TL-T5ME1
TL-T5MY1
TL-T5ME2
TL-T5MY2
Note: Models with a different frequency are available. The model numbers are TL-T@@@5. (e.g., TL-T2E15).
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2008 All Rights Reserved.
1
|
| |
 
Safety Precautions
WARNING
This product is not designed or rated for
ensuring safety of persons.
Do not use it for such purposes.
• Do not short the load. Explosion or burning may
result.
• Do not supply power to the Sensor with no load
connected, otherwise internal parts may be
damaged or burnt.
Applicable Models: AC 2-wire Models
Precautions for Correct Use
Do not use this product under ambient conditions that exceed
the ratings.
● Design
Effect of Surrounding Metals
• Be sure to separate the Sensor from surrounding metal
objects as shown in the following illustration.
12 mm
15 mm
25 mm
15 mm 15 mm
15 mm
15 mm
TL-T
Mutual Interference
When two or more Sensors are mounted face-to-face or side-
by-side, separate them as shown below. The table below
indicates the minimum distances A and B.
AB
Mutual Interference
(Unit: mm)
Model
TL-T2
TL-T5
Distance
A
40 (10)
120 (60)
B
12 (0)
80 (40)
Note: Figures in parentheses will apply if the Sensors in use are different from
each other in response frequency.
● Mounting
• At the time of rear mounting, be sure that the tightening
torque does not exceed 0.59 N·m.
Mounting screw
0.59 N·m
• At the time of side mounting, be sure that the tightening
torque does not exceed 0.78 N·m.
• The TL-T2 will not be influenced by metal when it is
embedded in metal.
Mounting screw
0.78 N·m
Dimensions
TL-T@
(Unit: mm)
Unless otherwise specified, the tolerance class IT16 is used for dimensions in this data sheet.
Indicator *2
Two, 3.1-dia. holes
4 *1
32±0.2
6
Sensing surface
4 17±0.2
26
Two, M3, depth 6
12
5
9
16±0.2 40
*1. DC-switching model: 4.0-dia.
vinyl-insulated round cable
with 3 conductors (Conductor
cross section: 0.2 mm2,
Insulator diameter: 1.2 mm),
Standard length: 2 m
AC-switching model: 4.0-dia.
vinyl-insulated round cable
with 2 conductors (Conductor
cross section: 0.3 mm2,
Insulator diameter: 1.3 mm),
Standard length: 2 m
*2. Detection indicator (red)
In the interest of product improvement, specifications are subject to change without notice.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2008 All Rights Reserved.
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for TL-T2E2 electronic component. |
| Information | Total 14 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ TL-T2E2.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| TL-T2E1 | The function is Slim Proximity Sensor. Omron | |
| TL-T2E2 | The function is Slim Proximity Sensor. Omron | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
TL-T
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||