VKP-11F72 Datasheet PDF - Tyco
| Part Number | VKP-11F72 | |
| Description | PCB Relays | |
| Manufacturers | Tyco | |
| Logo |  |
|
|
There is a preview and VKP-11F72 download ( pdf file ) link at the bottom of this page. Total 6 Pages | ||
Preview 1 page No Preview Available !
PCB Relays
Single Relays
VKP (Open – Sealed)
Catalog 1308028-2
Revised 6-2009
Features
– Limiting continuous
current 32 A at 85°C
– Wide voltage range
Typical Applications
– ABS control
– Blower fans
– Car alarm
– Cooling fan
– Engine control
– Fuel pump
– Hazard warning signal
– Heated front screen
– Heated rear screen
– Ignition
– Lamps front, rear, fog light
– Interior lights
– Main switch/supply relay
– Seat control
– Seatbelt pretensioner
– Sun roof
– Turn signal
– Valves
– Window lifter
– Wiper control
Please contact Tyco Electronics
for relay application support.
Design
– ELV compliant
– Open: flux tight type
– Sealed: washable type
Weight
– Approx. 19 g (0.67 oz.)
open version
– Approx. 22 g (0.77 oz.)
sealed version
Nominal Voltage
12 V or 24 V
Terminals
PCB terminals, for assembly on
printed circuit boards
VKP_3d01
Conditions
All parametric, environmental and
endurance tests are performed
according to EIA Standard RS-407-A
at standard test conditions unless
otherwise noted:
23°C ambient temperature,
20 - 50% RH, 998.9 ±33.9 hPa.
For general storage and processing
recommendations please refer to our
Application Notes and especially to
Storage in the “Glossary” page 23 or
at http://relays.tycoelectronics.com/
appnotes/
Disclaimer
All technical performance data apply to the relay as such, specific conditions of the individual application are not considered. Please always check the suitability of the
relay for your intended purpose. We do not assume any responsibility or liability for not complying herewith. We recommend to complete our questionnaire and to request
our technical service. Any responsibility for the application of the product remains with the customer only. All specifications are subject to change without notification.
All rights of Tyco Electronics are reserved.
156 All specifications subject to change. Consult Tyco Electronics for latest specifications.
|
| |
 
PCB Relays
Single Relays
VKP (Open – Sealed)
Catalog 1308028-2
Revised 6-2009
Application Information
Load Polarity: VKP series relays for flashing lamp applications are constructed
with special AgSnO movable contacts and standard AgSnO stationary contacts.
This causes the relay to be sensitive to the polarity of the load voltage. This type
of VKP relay must be mechanized in the circuit such that the more positive con-
nection is made to the movable contact (identified as terminal 4 in the wiring
diagrams). Failure to do so will nullify the benefit of the special AgSnO contact
material and will result in significantly reduced relay life.
Typical Applications: Typical applications: VKP series relays for flashing lamp
applications are typically used for turn signals, hazard warning, emergency vehi-
cle, and security system applications. They may also be suitable for high in-rush
current capacitive loads such as audio amplifiers. Use on inductive loads or loads
with high continuous load currents should be avoided. The relay should also not
be used in applications, which do not have a significant make current, as high
contact voltage drop may result.
Note: The VKP-***72 series relay with special AgSnO contact material replaces
the VKP-XXX32 standard current and the VKP-***62 high current PdCu/AgNi0.15
contact relays.
High Current Relays: VKP-***72 series relays for flashing lamp applications are
generally suitable for passenger car, light truck with or without special trailering
requirements, and medium duty truck, and emergency vehicle applications. They
are also generally suitable for security system applications for flashing lamps
and for most audio amplifier applications. This relay is also recommended for
alternating flasher applications, such as emergency vehicles. This version has
much improved performance on the normally open contacts, so optimum life can
be attained for alternating applications by using two normally open relays and
powering the coils alternately.
Electrical Life Test Information
High current relays: 3 bulb T/S system, combined turn signal and hazard
warning with special trailering (test requirements):
3 bulb
2.1 million operations
6 bulb
194 K operations
7 bulb
259 K operations
14 bulb
497 K operations
TOTAL
3.0 million operations
This application represents about the limit of the performance capability of the
"Flashing Lamp” type VKP relay. It should be noted that the low current operations
have very little effect on the product life where as the 14 bulb (only) loads can be
expected to fail at less than 1 million operations.
Note: Bulb as used here is a 27 Watt turn signal bulb, trade #1156. Testing
includes operations at –40°C, 23°C, and 85°C.
Design Considerations: It should be noted that although the VKP series relays
are capable of handling relatively high currents, when applying the product under
high current and high ambient temperature conditions, providing adequate con-
ductor volume is critical, as is the solder connection, particularly with respect to
the normally open contact terminal. It may be necessary to use high temperature
solder, a plated through hole PCB, or copper lead frame type construction under
these conditions to prevent failure of the solder joint.
160 All specifications subject to change. Consult Tyco Electronics for latest specifications.
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for VKP-11F72 electronic component. |
| Information | Total 6 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ VKP-11F72.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| VKP-11F72 | The function is PCB Relays. Tyco | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
VKP-
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||