|
|
PDF ALS-PDIC17-55C-TR8 Data sheet ( Hoja de datos )
| Número de pieza | ALS-PDIC17-55C-TR8 | |
| Descripción | Ambient Light Sensor | |
| Fabricantes | Everlight Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ALS-PDIC17-55C-TR8 (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
Surface - Mount
Ambient Light Sensor
ALS-PDIC17-55C/TR8
Features
‧Close responsively to the human eye spectrum
‧Light to Current, analog output
‧Good output linearity across wide illumination range
‧Low sensitivity variation across various light sources
‧Operating temperature performance, -40oC to 85oC
‧Wide supply voltage range, 1.8V to 5.5V
‧Size : 2.0mm(L)*1.25mm(W)*0.8mm(H)
‧RoHS compliant and Pb Free package
Description
The ALS-PDIC17-55C/TR8 is consisting of a photodiode and a current amplification IC.
EVERLIGHT ALS series product is a good effective solution to the power saving of display
backlighting of mobile appliances, such as the mobile phones, NB and PDAs. Due to the high
rejection ratio of infrared radiation, the spectral response of the ambient light sensor is
close to that of human eyes.
Applications
‧Detection of ambient light to control display backlighting
Mobile devices – mobile phones, PDAs
Computing device – TFT LCD monitor for Notebook computer
Consumer device – TFT LCD TV, plasma TV, video camera, digital camera, toys
‧Automatic residential and commercial management
‧Automatic contrast enhancement for electronic signboard
‧Ambient light monitoring device for daylight and artificial light
– Street light, CCD/CCTV
Everlight Electronics Co., Ltd.
Document No: DAS-017-004 Rev2.1
1
http:\\www.everlight.com
Jan. 25, 2008
1 page  
Surface - Mount
Ambient Light Sensor
ALS-PDIC17-55C/TR8
Everlight Electronics Co., Ltd.
Document No: DAS-017-004 Rev2.1
5
http:\\www.everlight.com
Jan. 25, 2008
5 Page 
Surface - Mount
Ambient Light Sensor
ALS-PDIC17-55C/TR8
Soldering Iron
℃Each terminal is to go to the tip of soldering iron temperature less than 350 for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and
more intervals, and do soldering of each terminal. Be careful because the damage of the
product is often started at the time of the hand solder.
Repairing
Repair should not be done after the device have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be
confirmed beforehand whether the characteristics of the device will or will not be
damaged by repairing.
Everlight Electronics Co., Ltd.
Document No: DAS-017-004 Rev2.1
11
http:\\www.everlight.com
Jan. 25, 2008
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet ALS-PDIC17-55C-TR8.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ALS-PDIC17-55C-TR8 | Ambient Light Sensor | Everlight Electronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |