|
|
Número de pieza | OPB755T | |
Descripción | Reflective Object Sensor | |
Fabricantes | OPTEK Technologies | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de OPB755T (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Product Bulletin OPB755T
June 1996
Reflective Object Sensor
Type OPB755T
Features
• High contrast ratio, 1000 to 1
minimum
• 12.0" ± 0.5" min. UL#1429 26 AWG
wire leads terminated into an AMP
#640442-5 connector
• Low cost plastic housing
12.0 ± 0.5
(304.8 ± 12.7)
Description
The OPB755T reflective assembly
features a phototransistor output
designed to decrease low-level light gain
while not affecting the high-level light
gain. Available without mounting tabs as
OPB755N.
Available with PC Board mountable
leads as OPB750 series. Logic output
sensors available in the
OPB760/OPB770 series.
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . . -40o C to +80o C
Input Diode
Forward DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Peak Forward Current (1 µs pulse width, 300 pps) . . . . . . . . . . . . . . . . . . . . . . . 3.0 A
Reverse DC Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(1)
Output Phototransistor
Collector-Emitter Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Collector DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(1)
Notes:
(1) Derate Linearly 1.82 mW/o C above 25o C.
(2) All parameters tested using pulse technique.
(3) Methanol or isopropanol are recommended as cleaning agents. Plastic housing is soluble in
chlorinated hydrocarbons and ketones.
(4) Photocurrent is measured using an Eastman Kodak Neutral White test card having a 90%
diffuse reflectance as a reflecting surface. Reference: Eastman Kodak, Catalog #1257795.
(5) IC(OFF) is the photocurrent measured with current to the input diode and a 5% reflecting
surface.
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
11-48
(972) 323-2200
Fax (972) 323-2396
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet OPB755T.PDF ] |
Número de pieza | Descripción | Fabricantes |
OPB755N | Reflective Object Sensor | OPTEK Technologies |
OPB755NZ | Reflective Object Sensor | OPTEK Technologies |
OPB755T | Reflective Object Sensor | OPTEK Technologies |
OPB755TAZ | Reflective Object Sensor | OPTEK Technologies |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |