Datasheet.kr   

A2025 데이터시트 PDF




Sanyo에서 제조한 전자 부품 A2025은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 A2025 자료 제공

부품번호 A2025 기능
기능 PNP Transistor - 2SA2025
제조업체 Sanyo
로고 Sanyo 로고


A2025 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 4 페이지수

미리보기를 사용할 수 없습니다

A2025 데이터시트, 핀배열, 회로
Ordering number:ENN6404
PNP Epitaxial Planar Silicon Transistor
2SA2025
DC/DC Converter Applications
Applications
· Relay drivers, lamp drivers, motor drivers, strobes.
Features
· Adoption of MBIT processes.
· Large current capacitance.
· Low collector-to-emitter saturation voltage.
· High-speed switching.
· Ultrasmall-sized package permitting applied sets to
be made small and slim.
· High allowable power dissipation.
Package Dimensions
unit:mm
2033A
[2SA2025]
4.0 2.2
0.4
0.5
0.4
0.4
123
1.3 1.3
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Base Current
Collector Dissipation
Junction Temperature
Storage Temperature
Symbol
VCBO
VCEO
VEBO
IC
ICP
IB
PC
Tj
Tstg
Electrical Characteristics at Ta = 25˚C
Conditions
Parameter
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
Output Capacitance
Collector-to-Emitter Saturation Voltage
Base-to-Emitter Saturation Voltage
Symbol
Conditions
ICBO
IEBO
hFE
fT
Cob
VCE(sat)
VBE(sat)
VCB=–12V, IE=0
VEB=–4V, IC=0
VCE=–2V, IC=–500mA
VCE=–2V, IC=–500mA
VCB=–10V, f=1MHz
IC=–1.5A, IB=–30mA
IC=–1.5A, IB=–30mA
3.0
3.8nom
1 : Emitter
2 : Collector
3 : Base
SANYO : SPA
Ratings
–15
–12
–5
–3
–5
–600
0.55
150
–55 to +150
Unit
V
V
V
A
A
mA
W
˚C
˚C
Ratings
min typ max
Unit
–0.1 µA
–0.1 µA
200 560
280 MHz
36 pF
–110 –165 mV
–0.85 –1.2 V
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
21000TS (KOTO) TA-2707 No.6404–1/4




A2025 pdf, 반도체, 판매, 대치품
2SA2025
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of February, 2000. Specifications and information herein are subject
to change without notice.
PS No.6404–4/4

4페이지












구       성 총 4 페이지수
다운로드[ A2025.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
A2022

PNP Transistor - 2SA2022

Sanyo
Sanyo
A2023

PNP Transistor - 2SA2023

Sanyo
Sanyo

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵