|
|
PDF TX8202 Data sheet ( Hoja de datos )
| Número de pieza | TX8202 | |
| Descripción | 8 Channel Stereo Mixer Operating Manual | |
| Fabricantes | Australian Monitor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TX8202 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
TX8202
8 Channel Stereo Mixer
with Direct Outputs
Operating Manual
TX8202, 8 Channel Stereo Mixer
Product Description
The TX8202 is a single rack height, 8 channel stereo mixer with direct outputs suitable for desk or 19” rack
mounting. The TX8202 has 4 balanced mic or line inputs and 4 stereo auxiliary inputs. Each input channel
has individual bass, treble and pan controls. The first 4 channels also feature a line level direct output which
can be used to feed additional amplifiers, mixers or recording devices. An internal dip switch allows the
first 4 inputs to be routed to either the direct output, the master outputs or both. The TX8202 also features
in-built VOX muting and an optional 4 tone generator with Alert, Evacuate, Pre-Announce, Bell tones and
optional remote VCA for the Master Volume.
1 page  
Dual RCA Stereo Line Inputs
The top connectors are for the Left channel auxiliary inputs while the bottom connectors are for the Right
channel auxiliary inputs. Reading from Left to Right across the rear panel, the connections are for auxiliary
inputs 8, 7, 6 and 5.
XLR Microphone/Line Inputs
Each XLR input is switchable to be either balanced mic or line (via an internal dip switch, the
location and setting of which is explained in the ‘Internal Adjustments’ section of this manual).
When set to mic level, the mic input sensitivity is 1mV ( for a 1 Volt output). When set to line
level, the input sensitivity is 330 mV (for a 1 Volt output). Pin connections are: pin #1-earth; pin #2-active
(high, +); pin #3-active (low, -). Phantom power of +15 volts is available on all 4 XLR inputs. An internal
phantom power ON-OFF switch is provided for each channel. The default setting is ON (See the ‘Internal
Adjustments’ section of this manual for more details).
Direct Outputs
A unique feature of the TX8202 is the individual direct output available for each of the first 4
channels. The direct outputs are accessed via balanced TRS 1/4” sockets for each channel. The
level of each output is 1 Volt (nominal). Internal jumpers (JP1) allow signal from any of the first
six channels to be disconnected from the main left/right outputs (See the ‘Internal Adjustments’ section of
this manual for more information). The direct outputs are adjustable to be pre or post the channel level
control. Factory default setting is post fader.
Vox Muting
Priority muting is provided for channels 1 and 2. Both channels have equal priority and will mute
channels 3-8 when signal is present. The muting function may be disabled by moving the jumper
labeled JP2 (located on the pcb behind the channel 8 volume control). ON and OFF positions are
clearly indicated on the pcb beside the jumper. The unit ships from the factory with muting enabled (JP2 -
OFF) – that’s right, OFF; it is a muting disable function, not a muting enable function. When channels 1
and 2 are disconnected from the main left/right outputs, the muting function is automatically disabled.
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet TX8202.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TX8202 | 8 Channel Stereo Mixer Operating Manual | Australian Monitor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |