|
|
|
부품번호 | K3HB-P 기능 |
|
|
기능 | Digital Indicators User Manual | ||
제조업체 | Omron | ||
로고 | |||
전체 30 페이지수
Digital Indicators
K3HB-R/-P/-C
User's Manual
P
Cat. No. N136-E1-03
Terms and Conditions Agreement
Read and understand this Manual
Please read and understand this catalog before purchasing the products. Please consult your OMRON
representative if you have any questions or comments.
Warranty, Limitations of Liability
Warranties
● Exclusive
Warranty
● Limitations
● Buyer Remedy
Omron’s exclusive warranty is that the Products will be free from defects in materials
and workmanship for a period of twelve months from the date of sale by Omron (or
such other period expressed in writing by Omron). Omron disclaims all other war-
ranties, express or implied.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR
IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES
THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY
MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or
expenses based on infringement by the Products or otherwise of any intellectual
property right.
Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the
form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Prod-
uct, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-
complying Product; provided that in no event shall Omron be responsible for war-
ranty, repair, indemnity or any other claims or expenses regarding the Products
unless Omron’s analysis confirms that the Products were properly handled, stored,
installed and maintained and not subject to contamination, abuse, misuse or inap-
propriate modification. Return of any Products by Buyer must be approved in writing
by Omron before shipment. Omron Companies shall not be liable for the suitability
or unsuitability or the results from the use of Products in combination with any elec-
trical or electronic components, circuits, system assemblies or any other materials
or substances or environments. Any advice, recommendations or information given
orally or in writing, are not to be construed as an amendment or addition to the
above warranty.
Limitation on
Liability; Etc
See http://www.omron.com/global/ or contact your Omron representative for pub-
lished information.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCI-
DENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUC-
TION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE
PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY,
NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of
the Product on which liability is asserted.
II
4페이지 ● Precautions
WARNING
Do not touch the terminals while power is being supplied. Doing
so may possibly result in electric shock. Make sure that the
terminal cover is installed before using the product.
Always provide protective circuits in the network. Without
protective circuits, malfunctions may possibly result in accidents
that cause serious injury or significant property damage.
Provide double or triple safety measures in external control
circuits, such as emergency stop circuits, interlock circuits, or limit
circuits, to ensure safety in the system if an abnormality occurs
due to malfunction of the product or another external factor
affecting the product's operation.
CAUTION
Do not allow pieces of metal, wire clippings, or fine metallic
shavings or filings from installation to enter the product. Doing so
may occasionally result in electric shock, fire, or malfunction.
Do not use the product in locations where flammable or explosive
gases are present. Doing so may occasionally result in minor or
moderate explosion, causing minor or moderate injury, or property
damage.
Do not attempt to disassemble, repair, or modify the product.
Doing so may occasionally result in minor or moderate injury due
to electric shock.
Do not use the equipment for measurements within Measurement
Categories II, III, and IV for K3HB-R, K3HB-P, and K3HB-C
(according to IEC61010-1). Doing so may occasionally cause
unexpected operation, resulting in minor or moderate injury, or
damage to the equipment. Use the equipment for measurements
only within the Measurement Category for which the product is
designed.
Perform correct setting of the product according to the application.
Failure to do so may occasionally cause unexpected operation,
resulting in minor or moderate injury, or damage to the equipment.
Ensure safety in the event of product failure by taking safety
measures, such as installing a separate monitoring system.
Product failure may occasionally prevent operation of comparative
outputs, resulting in damage to the connected facilities and
equipment.
Tighten the screws on the terminal block and the connector
locking screws securely using a tightening torque within the
following ranges. Loose screws may occasionally cause fire,
resulting in minor or moderate injury, or damage to the equipment.
Terminal block screws: 0.43 to 0.58 N·m
Connector locking screws: 0.18 to 0.22 N·m
V
7페이지 | |||
구 성 | 총 30 페이지수 | ||
다운로드 | [ K3HB-P.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
K3HB-C | Digital Indicators User Manual | Omron |
K3HB-C | Up/Down Counting Pulse Indicator | Omron |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |