Datasheet.kr   

LM150X06-A3 데이터시트 PDF




LG에서 제조한 전자 부품 LM150X06-A3은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 LM150X06-A3 자료 제공

부품번호 LM150X06-A3 기능
기능 XGA TFT LCD
제조업체 LG
로고 LG 로고


LM150X06-A3 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 27 페이지수

미리보기를 사용할 수 없습니다

LM150X06-A3 데이터시트, 핀배열, 회로
Product Specification
SPECIFICATION
FOR
APPROVAL
LM150X06
Liquid Crystal Display
( ) Preliminary Specification
( ) Final Specification
Title
Buyer
Model
-
Signature
/
Date
/
/
Please return 1 copy for your confirmation with
your signature and comments.
15.0” XGA TFT LCD
Supplier
*Model
Suffix
LG.Philips LCD CO., Ltd.
LM150X06
A3
*When you obtain standard approval,
please use the above model name without suffix
Approved by
Giant Kim / G.Manager
Reviewed by
Gilbert Kwon / Manager
B. T. Kim / Manager
Prepared by
Khan Seo / Engineer
Date
Product Engineering Dept.
LG. Philips LCD Co., Ltd
Ver. 0.1
Jan. 31, 2002
1/27




LM150X06-A3 pdf, 반도체, 판매, 대치품
Product Specification
LM150X06
Liquid Crystal Display
1. General Description
The LM150X06-A3 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode
Fluorescent Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active
element. It is a transmissive type display operating in the normally white mode. This TFT-LCD has a 15.0
inches diagonally measured active display area with XGA resolution(768 vertical by 1024 horizontal pixel
array). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical
stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for
each dot, thus, presenting a palette of more than 16M colors.
The LM150X06-A3 has been designed to apply the LVDS(8-bit,1-port) interface method.
The LM150X06-A3 LCD is intended to support applications where high brightness, wide viewing angle,
high color saturation, and high color depth are very important. In combination with the vertical
arrangement of the sub-pixels, the LM150X06-A3 characteristics provide an excellent flat panel display
for office automation products such as monitors.
5 pairs
3.3V
Timing
Control
Block
Power
Block
Column driver circuit
TFT-LCD
(1024X768)
CN.2
General Features
Active screen size
Outline Dimension
Pixel Pitch
Pixel format
Color depth
Luminance, white
Power Consumption
Weight
Display operating mode
Surface treatments
Ver. 0.1
Backlight Ass’y
[ Figure 1 ] Block diagram
15.0 inches(304.128 x 228.096) diagonal
331.3(H) × 257.9(V) × 11.0(D) mm (Typ.)
0.297 mm x 0.297mm
1024 Horiz. by 768 Vert. Pixels RGB stripes arrangement
16M colors ( 6-bit with FRC )
250 cd/m2(Typ.)
9.1254 Watt(Typ.)
930 g (Typ.)
Transmissive mode, normally white
Hard coating(3H)
Anti-glare treatment of the front polarizer
Jan. 31, 2002
4/27

4페이지










LM150X06-A3 전자부품, 판매, 대치품
Product Specification
LM150X06
Liquid Crystal Display
5. The output of the inverter must have symmetrical(negative and positive) voltage waveform and
symmetrical current waveform.(Unsymmetrical ratio is less than 10%) Please do not use the inverter
which has unsymmetrical voltage and unsymmetrical current and spike wave.
Lamp frequency may produce interference with horizontal synchronous frequency and as a result this
may cause beat on the display.Therefore lamp frequency shall be as away as possible from the
horizontal synchronous frequency and from its harmonics in order to prevent interference.
6. Let’s define the brightness of the lamp after being lighted for 5 minutes as 100%.
Ts is the time required for the brightness of the center of the lamp to be not less than 95%.
The used lamp current is the lamp typical current.
7. The lamp power consumption shown above does not include loss of external inverter under 25.
The used lamp current is the lamp typical current.
8. The life time is determined as the time at which brightness of lamp is 50% compared to that of initial
value at the typical lamp current on condition of continuous operating at 25 ±2.
9. Requirements for a system inverter design, which is intended to have a better display performance,
a better power efficiency and a more reliable lamp.
It shall help increase the lamp lifetime and reduce its leakage current.
a. The unbalance rate of the inverter waveform should be 10% below;
b. The distortion rate of the waveform should be within 2 ±10%;
c. The ideal sine wave form shall be symmetric in positive and negative polarities.
Ip
I -p
* Asymmetry rate = | I p – I –p | / Irms * 100%
* Distortion rate = I p (or I –p) / Irms
10. Inverter open voltage must be more than lamp starting voltage.
Ver. 0.1
[ Figure 3 ] Mosaic pattern for power consumption measurement
Jan. 31, 2002
7/27

7페이지


구       성 총 27 페이지수
다운로드[ LM150X06-A3.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
LM150X06-A3

XGA TFT LCD

LG
LG
LM150X06-A3M1

TFt LCD

LG
LG

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵