|
|
|
부품번호 | BTS50015-1TAC 기능 |
|
|
기능 | Smart High-Side Power Switch | ||
제조업체 | Infineon | ||
로고 | |||
BTS50015-1TAC
Smart High-Side Power Switch
Data Sheet
Rev. 1.0, 2013-04-30
Automotive Power
Smart High-Side Power Switch
BTS50015-1TAC
1 Overview
Application
• All types of resistive, inductive and capacitive loads
• Replaces electromechanical relays and fuses
• Most suitable for applications with high current loads, such as heating
system, main switch for power distribution, start-stop power supply switch
• PWM application with low frequencies
Features
PG-TO263-7-8
• One channel device
• Low Stand-by current
• Wide input voltage range (can be driven by logic levels 3.3V and 5V as well as directly by VS)
• Electrostatic discharge protection (ESD)
• Optimized Electromagnetic Compatibility (EMC)
• Logic ground independent from load ground
• Very low leakage current on OUT pin
• Compatible to cranking pulse requirement (test pulse 4 of ISO7637 and cold start pulse in LV124)
• Embedded diagnostic functions
• Embedded protection functions
• Green Product (RoHS compliant)
• AEC Qualified
Description
The BTS50015-1TAC is a 1.5mΩ single channel Smart High-Side Power Switch, embedded in a PG-TO-263-7-8
package, providing protective functions and diagnosis. It contains Infineon® Reversave. The power transistor is
built by a N-channel power MOSFET with charge pump. It is specially designed to drive high current loads up to
80A, for applications like switched battery couplings, power distribution switches, heaters, glow plugs, in the harsh
automotive environment.
Type
BTS50015-1TAC
Data Sheet
Package
PG-TO-263-7-8
4
Marking
S50015C
Rev. 1.0, 2013-04-30
4페이지 3 Pin Configuration
3.1 Pin Assignment
BTS50015-1TAC
Pin Configuration
4
123 567
Figure 2 Pin Configuration
3.2 Pin Definitions and Functions
Pin
Symbol
Function
1
GND
GrouND; Ground connection
2 IN
INput; Input signal for channel activation. HIGH active
3 IS
Sense; Provides signal for diagnosis
4, Cooling tab VS
Supply Voltage; Battery voltage
5, 6, 7
OUT
OUTput; Protected high side power output1)
1) All output pins are internally connected and they also have to be connected together on the PCB. Not shorting all outputs
on PCB will considerably increase the ON-state resistance and decrease the current sense / overcurrent tripping accuracy.
PCB traces have to be designed to withstand the maximum current.
Data Sheet
7 Rev. 1.0, 2013-04-30
7페이지 | |||
구 성 | 총 30 페이지수 | ||
다운로드 | [ BTS50015-1TAC.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
BTS50015-1TAA | Smart High-Side Power Switch | Infineon |
BTS50015-1TAC | Smart High-Side Power Switch | Infineon |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |