|
|
PDF A4051 Data sheet ( Hoja de datos )
| Número de pieza | A4051 | |
| Descripción | 1A LINEAR LI-ION BATTERY CHARGER | |
| Fabricantes | AiT Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de A4051 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
AiT Semiconductor Inc.
www.ait-ic.com
A4051
BATTERY MANAGEMENT
1A LINEAR LI-ION BATTERY CHARGER
DESCRIPTION
FEATURES
The A4051 is a complete constant current & constant
voltage linear charger for single cell lithium-ion
batteries. Its PSOP package and low external
component count make the A4051 ideally suited for
portable applications. Furthermore, the A4051 is
specifically designed to work within USB power
specifications.
No external sense resistor is needed, and no blocking
diode is required due to the internal MOSFET
architecture. Thermal feedback regulates the charge
current to limit the die temperature during high power
operation or high ambient temperature. The charge
voltage is fixed at 4.2V, and the charge current can
be programmed externally with a single resistor. The
A4051 automatically terminates the charge cycle
when the charge current drops to 1/10th the
programmed value after the final float voltage is
reached.
When the input supply (wall adapter or USB supply)
is removed, the A4051 automatically enters a low
current state, dropping the battery drain current to
less than 2uA. The A4051 can be put into shutdown
mode, reducing the supply current to 50uA.
Other features include Battery temperature monitor,
under-voltage lockout, automatic recharge and two
status pins to indicate charge and charge termination.
The A4051 is available in PSOP8 Package
Programmable Charge Current Up to 1000mA
No MOSFET, Sense Resistor or Blocking Diode
Required
Complete Linear Charger in PSOP Package for
single Cell Lithium-Ion Batteries
Constant-Current/Constant-Voltage Operation
with Thermal Regulation to Maximize Charge
Rate Without Risk of Overheating
Charges Single Cell Li-Ion Batteries Directly
from USB Port
Preset 4.2V Charge Voltage with ±1%
Accuracy
Charge Current Monitor Output for Gas Gauging
Automatic Recharge
Charge state pairs of output, no battery and fault
status display
C/10 Charge Termination
50uA Supply Current in Shutdown
2.9V Trickle Charge Threshold
Soft-Start Limits Inrush Current
Battery temperature monitoring function
Available in PSOP8 Package
APPLICATION
Cellular Telephones, PDAs, MP3 /MP4 Players
Charging Docks and Cradles
Bluetooth 、GPS Applications
TYPICAL APPLICATION
ORDERING INFORMATION
Package Type
Part Number
PSOP8
MP8
A4051MP8R
A4051MP8VR
Note
R: Tape & Reel
V: Halogen free package
AiT provides all RoHS products,
suffix “ V “ means Halogen free Package
REV1.2
- JUN 2010 RELEASED, SEP 2012 UPDATED -
-1-
1 page  
AiT Semiconductor Inc.
www.ait-ic.com
A4051
BATTERY MANAGEMENT
1A LINEAR LI-ION BATTERY CHARGER
TYPICAL CHARACTERISTICS
1. VPROG vs VIN
2. VFLOAT vs VCC
3. ITRICKL vs VCC (VBAT=2.5V)
4. IBAT vs VCC (VBAT=3.8V)
5. IBAT vs VBAT
6. Regulated Output (Float) Voltage vs Temp
7. PROG Pin Voltage vs Temp
REV1.2
- JUN 2010 RELEASED, SEP 2012 UPDATED -
8. Charge Current vs PROG Pin Voltage
-5-
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet A4051.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| A4051 | 1A LINEAR LI-ION BATTERY CHARGER | AiT Semiconductor |
| A4053 | 1A LINEAR LI-ION BATTERY CHARGER | AiT Semiconductor |
| A4054A | 800mA STANDALONE LINEAR Li-ion BATTERY CHARGER | AiT Semiconductor |
| A4055 | 800mA STANDALONE LINEAR LI-ION BATTERY CHARGER | AiT Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |