|
|
|
부품번호 | LG18650A2 기능 |
|
|
기능 | Lithium Ion Battery | ||
제조업체 | LG | ||
로고 | |||
Prepared
LGCRP/BRI/BTC
Approved
LGCRP/BRI/BTC
Yun, In Taeg
Kim, Soo Ryoung
PRODUCT SPECIFICATION
TENTATIVE
Document No.
Date
LRB-PS-CY240
2003-06-11
Description
Lithium Ion ICR18650 A2
1 (7)
Rev
0
PRODUCT SPECIFICATION
Rechargeable Lithium Ion Battery
Model : ICR18650 A2
Revision History
REVISION
DATE
0 2003-06-11
ORIGINATOR
Yun, In Taeg
REASON FOR CHANGE
Original Release
Prepared
Yun, In Taeg
Reviewed
Jung, Jae Han
Approved
Kim, Soo Ryoung
Date : ’03. 06. 11. Date : ’03. 06. 11. Date : ’03. 06. 11.
20 YOIDO-DONG YOUNGDUNGPO-GU,
SEOUL 150-721, KOREA
TEL : (82) 2-3773-3599, 3659 FAX : (82) 2-3773-7005
http://www.lgchem.com
Prepared
LGCRP/BRI/BTC
Approved
LGCRP/BRI/BTC
Yun, In Taeg
Kim, Soo Ryoung
PRODUCT SPECIFICATION
TENTATIVE
Document No.
Date
LRB-PS-CY240
2003-06-11
Description
Lithium Ion ICR18650 A2
4 (7)
Rev
0
6.5 Initial AC Impedance
Initial AC impedance is measured at 1kHz after standard charge.
Initial AC Impedance
90 m (with PTC)
6.6 Temperature Dependency of Capacity
Cells shall be charged per 6.1 at 23ºC ± 2ºC and discharged per 6.2 at the following temperatures.
Relative capacity at each temperature shall meet the following.
Charge Temp.
23º
-10 º
70 %
Discharge Temperature
0 º 23 º
90 %
100 %
60 º
95 %
6.7 Storage Characteristics
Cells shall be charged per 6.1 and stored in a temperature-controlled environment at 23ºC ± 2ºC for
30 days. After storage, cells shall be discharged per 6.2 to obtain the remaining capacity.
Remaining capacity
90 % (of minimum capacity in 3.1)
6.8 Cell Voltage (as of shipment)
Voltage range : 3.7 ~ 3.9 V
7. Mechanical Characteristics
7.1 Drop Test
Test method
Criteria
: Cells charged per 6.1 are dropped onto an wooden floor from 4 feet height for 3
cycles, where each cycle consists of 3 drops, 2 drops from each cell terminal and
1drop from the side of cell can (Total number of drops = 9). After test, cells are
discharged per 6.2 and cycled per 6.1 and 6.2 for 3 cycles to obtain recovered
capacity.
: No leakage, Capacity recovery rate 80 %
7.2 Vibration Test
Test method
Criteria
: Cells charged per 6.1 are vibrated for 90 minutes per each of the three mutually
perpendicular axis (x, y, z) with an amplitude of 0.8mm, frequency of 10Hz to
55Hz and sweep of 1Hz change per minute. After test, cells are discharged per
6.2 and cycled per 6.1 and 6.2 for 3 cycles to obtain recovered capacity.
: No leakage, Capacity recovery rate 80 %
4페이지 Prepared
LGCRP/BRI/BTC
Approved
LGCRP/BRI/BTC
Yun, In Taeg
Kim, Soo Ryoung
PRODUCT SPECIFICATION
TENTATIVE
Document No.
Date
LRB-PS-CY240
2003-06-11
Description
Lithium Ion ICR18650 A2
7 (7)
Rev
0
from date of manufacturing.
The warranty set forth above or described in Proper Use and Handling excludes a defect which is not
related to manufacturing on the cell.
13. Others
Any matter not included in this specification shall be conferred between the both parties.
This document shall replace the document bearing a former revision index, and customers are kindly
requested to destroy the former document in possession.
7페이지 | |||
구 성 | 총 8 페이지수 | ||
다운로드 | [ LG18650A2.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
LG18650A2 | Lithium Ion Battery | LG |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |