|
|
PDF MKL33Z128VLH4 Data sheet ( Hoja de datos )
| Número de pieza | MKL33Z128VLH4 | |
| Descripción | Kinetis KL33 Microcontroller | |
| Fabricantes | Freescale Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MKL33Z128VLH4 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Freescale Semiconductor, Inc.
Data Sheet: Technical Data
KL33P64M48SF6
Rev. 4, 03/2015
Kinetis KL33 Microcontroller
48 MHz ARM® Cortex®-M0+ and 128/256 KB Flash
The KL33 series is optimized for cost-sensitive and battery-
powered applications requiring low-power segment LCD. The
product offers:
• Low power segment LCD up to 28x8 or 32x4
• Embedded ROM with boot loader for flexible program
upgrade
• High accuracy internal voltage and clock reference
• FlexIO to support any standard and customized serial
peripheral emulation
• Down to 54uA/MHz in very low power run mode and
1.96uA in deep sleep mode (RAM + RTC retained)
MKL33Z256Vxx4(R)
MKL33Z128Vxx4(R)
64 LQFP
10x10 mm P 0.5 mm
64 BGA
5x5 mm P 0.5 mm
Core Processor
• ARM® Cortex®-M0+ core up to 48 MHz
Memories
• 128/256 KB program flash memory
• 16/32 KB SRAM
• 16 KB ROM with build-in bootloader
• 32-byte backup register
System
• 4-channel asynchronous DMA controller
• Watchdog
• Low-leakage wakeup unit
• Two-pin Serial Wire Debug (SWD) programming and
debug interface
• Micro Trace Buffer
• Bit manipulation engine
• Interrupt controller
Clocks
• 48MHz high accuracy (up to 0.5%) internal reference
clock
• 8MHz/2MHz high accuracy (up to 3%) internal
reference clock
• 1KHz reference clock active under all low-power
modes (except VLLS0)
• 32–40KHz and 3–32MHz crystal oscillator
Peripherals
• Segment LCD supporting up to 28x8 or 32x4
segments
• One UART module supporting ISO7816, operating
up to 1.5 Mbit/s
• Two low-power UART modules supporting
asynchronous operation in low-power modes
• Two I2C modules and I2C0 supporting up to 1
Mbit/s
• Two 16-bit SPI modules supporting up to 24 Mbit/s
• One FlexIO module supporting emulation of
additional UART, IrDA, SPI, I2C, I2S, PWM and
other serial modules, etc.
• One serial audio interface I2S
• One 16-bit 818 ksps ADC module with high
accuracy internal voltage reference (Vref) and up to
16 channels
• High-speed analog comparator containing a 6-bit
DAC for programmable reference input
• One 12-bit DAC
• 1.2 V internal voltage reference
Timers
• One 6-channel Timer/PWM module
• Two 2-channel Timer/PWM modules
• One low-power timer
• Periodic interrupt timer
• Real time clock
Freescale reserves the right to change the detail specifications as may be required to
permit improvements in the design of its products. © 2012–2015 Freescale
Semiconductor, Inc. All rights reserved.
1 page  
1.4 Voltage and current operating ratings
Table 4. Voltage and current operating ratings
Symbol
VDD
IDD
VIO
ID
VDDA
Description
Digital supply voltage
Digital supply current
IO pin input voltage
Instantaneous maximum current single pin limit (applies to
all port pins)
Analog supply voltage
Min.
–0.3
—
–0.3
–25
VDD – 0.3
Max.
3.8
120
VDD + 0.3
25
VDD + 0.3
General
Unit
V
mA
V
mA
V
2 General
2.1 AC electrical characteristics
Unless otherwise specified, propagation delays are measured from the 50% to the 50%
point, and rise and fall times are measured at the 20% and 80% points, as shown in the
following figure.
Input Signal
VIH
Midpoint1
Fall Time
Low
VIL
High
Rise Time
80%
50%
20%
The midpoint is VIL + (VIH - VIL) / 2
Figure 1. Input signal measurement reference
All digital I/O switching characteristics, unless otherwise specified, assume that the
output pins have the following characteristics.
• CL=30 pF loads
• Slew rate disabled
• Normal drive strength
2.2 Nonswitching electrical specifications
Kinetis KL33 Microcontroller, Rev.4, 03/2015.
5
Freescale Semiconductor, Inc.
5 Page 
Table 9. Power consumption operating behaviors (continued)
Symbol Description
IDD_VLPRC Very Low Power Run Core Mark in Flash in
O Compute Operation mode: Core@4MHz, Flash
@1MHz, VDD = 3.0 V
• at 25 °C
IDD_VLPRC Very-low-power-run While(1) loop in SRAM in
O compute operation mode— 8 MHz LIRC mode, 4
MHz core / 1 MHz flash, VDD = 3.0 V
• at 25 °C
IDD_VLPRC Very-low-power run While(1) loop in SRAM in
O compute operation mode:—2 MHz LIRC mode, 2
MHz core / 0.5 MHz flash, VDD = 3.0 V
• at 25 °C
IDD_VLPR
Very-low-power run mode current— 2 MHz LIRC
mode, While(1) loop in flash all peripheral clock
disable, 2 MHz core / 0.5 MHz flash, VDD = 3.0 V
• at 25 °C
IDD_VLPR
Very-low-power run mode current— 2 MHz LIRC
mode, While(1) loop in flash all peripheral clock
disable, 125 kHz core / 31.25 kHz flash, VDD =
3.0 V
• at 25 °C
IDD_VLPR
Very-low-power run mode current— 8 MHz LIRC
mode, While(1) loop in flash all peripheral clock
disable, 4 MHz core / 1 MHz flash, VDD = 3.0 V
• at 25 °C
IDD_VLPR
Very-low-power run mode current— 8 MHz LIRC
mode, While(1) loop in flash all peripheral clock
enable, 4 MHz core / 1 MHz flash, VDD = 3.0 V
• at 25 °C
IDD_VLPR
Very-low-power run mode current— 8 MHz LIRC
mode, While(1) loop in SRAM in all peripheral
clock disable, 4 MHz core / 1 MHz flash, VDD =
3.0 V
• at 25 °C
IDD_VLPR
Very-low-power run mode current— 8 MHz LIRC
mode, While(1) loop in SRAM all peripheral clock
enable, 4 MHz core / 1 MHz flash, VDD = 3.0 V
• at 25 °C
IDD_VLPR
Very-low-power run mode current—2 MHz LIRC
mode, While(1) loop in SRAM in all peripheral
clock disable, 2 MHz core / 0.5 MHz flash, VDD =
3.0 V
• at 25 °C
IDD_VLPR
Very-low-power run mode current—2 MHz LIRC
mode, While(1) loop in SRAM all peripheral clock
disable, 125 kHz core / 31.25 kHz flash, VDD =
3.0 V
• at 25 °C
Min.
—
—
—
—
—
—
—
—
—
—
—
Typ.
826
405
154
108
39
249
337
416
494
166
50
Max.
907
486
235
189
120
330
418
497
575
247
131
Unit
μA
μA
μA
μA
μA
μA
μA
μA
μA
μA
μA
Table continues on the next page...
General
Notes
Kinetis KL33 Microcontroller, Rev.4, 03/2015.
11
Freescale Semiconductor, Inc.
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet MKL33Z128VLH4.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MKL33Z128VLH4 | Kinetis KL33 Microcontroller | Freescale Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |