Datasheet.kr   

KSZ8021RNL 데이터시트 PDF




Micrel Semiconductor에서 제조한 전자 부품 KSZ8021RNL은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 KSZ8021RNL 자료 제공

부품번호 KSZ8021RNL 기능
기능 10Base-T/100Base-TX PHY
제조업체 Micrel Semiconductor
로고 Micrel Semiconductor 로고


KSZ8021RNL 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 30 페이지수

미리보기를 사용할 수 없습니다

KSZ8021RNL 데이터시트, 핀배열, 회로
KSZ8021RNL / KSZ8031RNL
10Base-T/100Base-TX PHY
with RMII Support
General Description
Features
The KSZ8031RNL is a single-supply 10Base-T/100Base-
TX Ethernet physical layer transceiver for transmission
and reception of data over standard CAT-5 unshielded
twisted pair (UTP) cable.
The KSZ8031RNL is a highly-integrated, compact solution.
It reduces board cost and simplifies board layout by using
on-chip termination resistors for the differential pairs, by
integrating a low noise regulator to supply the 1.2V core,
and by offering 1.8/2.5/3.3V digital I/O interface support.
The KSZ8031RNL offers the Reduced Media Independent
Interface (RMII) for direct connection to RMII-compliant
MACs in Ethernet processors and switches.
As the power-up default, the KSZ8031RNL uses a 25MHz
crystal to generate all required clocks, including the
50MHz RMII reference clock output for the MAC. The
KSZ8021RNL is the version that takes in the 50MHz RMII
reference clock as the power-up default.
To facilitate system bring-up and debugging in production
testing and in product deployment, parametric NAND tree
support enables fault detection between KSZ8031RNL
I/Os and board, while Micrel’s LinkMD® TDR-based cable
diagnostics permit identification of faulty copper cabling.
The KSZ8031RNL and KSZ8021RNL are available in 24-
pin, lead-free QFN packages (see Ordering Information).
Data sheets and support documentation can be found on
Micrel’s web site at: www.micrel.com.
Single-chip 10Base-T/100Base-TX IEEE 802.3
compliant Ethernet Transceiver
RMII v1.2 Interface support with 50MHz reference clock
output to MAC, and option to input 50MHz reference
clock
RMII back-to-back mode support for 100Mbps copper
repeater or media converter
MDC/MDIO Management Interface for PHY register
configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline Wander Correction
HP Auto MDI/MDI-X for reliable detection and
correction for straight-through and crossover cables
with disable and enable option
Auto-negotiation to automatically select the highest link-
up speed (10/100 Mbps) and duplex (half/full)
Power down and power saving modes
LinkMD® TDR-based cable diagnostics for identification
of faulty copper cabling
Parametric NAND Tree support for fault detection
between chip I/Os and board
____________________________________________________________________________________________________________
Functional Diagram
LinkMD is a registered trademark of Micrel, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
August 2010
M9999-082710-1.0




KSZ8021RNL pdf, 반도체, 판매, 대치품
Micrel, Inc.
KSZ8021RNL / KSZ8031RNL
Contents
General Description .............................................................................................................................................................. 1
Features ................................................................................................................................................................................. 1
Functional Diagram............................................................................................................................................................... 1
Applications........................................................................................................................................................................... 2
Ordering Information ............................................................................................................................................................ 2
Revision History.................................................................................................................................................................... 3
Contents................................................................................................................................................................................. 4
List of Figures........................................................................................................................................................................ 6
List of Tables ......................................................................................................................................................................... 7
Pin Configuration – KSZ8021RNL / KSZ8031RNL.............................................................................................................. 8
Pin Description – KSZ8021RNL / KSZ8031RNL ................................................................................................................. 9
Strapping Options – KSZ8021RNL / KSZ8031RNL .......................................................................................................... 11
Functional Description: 10Base-T/100Base-TX Transceiver ......................................................................................... 12
100Base-TX Transmit....................................................................................................................................................... 12
100Base-TX Receive........................................................................................................................................................ 12
10Base-T Transmit ........................................................................................................................................................... 12
10Base-T Receive ............................................................................................................................................................ 13
Scrambler/De-scrambler (100Base-TX only).................................................................................................................... 13
PLL Clock Synthesizer...................................................................................................................................................... 13
Auto-Negotiation ............................................................................................................................................................... 13
RMII Data Interface.............................................................................................................................................................. 15
RMII Signal Definition ....................................................................................................................................................... 15
Reference Clock (REF_CLK) ....................................................................................................................................... 15
Transmit Enable (TXEN) .............................................................................................................................................. 15
Transmit Data [1:0] (TXD[1:0]) ..................................................................................................................................... 15
Carrier Sense/Receive Data Valid (CRS_DV).............................................................................................................. 15
Receive Data [1:0] (RXD[1:0]) ...................................................................................................................................... 16
Receive Error (RXER) .................................................................................................................................................. 16
Collision Detection........................................................................................................................................................ 16
RMII Signal Diagram – for KSZ8021/31RNL...................................................................................................................... 16
RMII – 25MHz Clock Mode............................................................................................................................................... 16
RMII – 50MHz Clock Mode............................................................................................................................................... 17
Back-to-Back Mode – 100Mbps Copper Repeater / Media Converter............................................................................ 18
RMII Back-to-Back Mode.................................................................................................................................................. 18
MII Management (MIIM) Interface....................................................................................................................................... 19
Interrupt (INTRP) ................................................................................................................................................................. 19
HP Auto MDI/MDI-X ............................................................................................................................................................. 19
Straight Cable ................................................................................................................................................................... 20
Crossover Cable ............................................................................................................................................................... 20
LinkMD® Cable Diagnostics................................................................................................................................................ 21
August 2010
4 M9999-082710-1.0

4페이지










KSZ8021RNL 전자부품, 판매, 대치품
Micrel, Inc.
KSZ8021RNL / KSZ8031RNL
List of Tables
Table 1. RMII Signal Description.......................................................................................................................................... 15
Table 2. RMII Signal Connection for RMII Back-to-Back Mode (100Base-TX Copper Repeater) ...................................... 18
Table 3. MII Management Frame Format – for KSZ8021/31RNL........................................................................................ 19
Table 4. MDI/MDI-X Pin Definition ....................................................................................................................................... 20
Table 5. NAND Tree Test Pin Order – for KSZ8021/31RNL ............................................................................................... 21
Table 6. KSZ8021/31RNL Power Pin Description ............................................................................................................... 23
Table 7. RMII Timing Parameters – KSZ8021/31RNL (25MHz input to XI pin, 50MHz output from REF_CLK pin)........... 35
Table 8. RMII Timing Parameters – KSZ8021/31RNL (50MHz input to XI pin)................................................................... 35
Table 9. Auto-Negotiation Fast Link Pulse (FLP) Timing Parameters ................................................................................. 36
Table 10. MDC/MDIO Timing Parameters ........................................................................................................................... 37
Table 11. Reset Timing Parameters .................................................................................................................................... 38
Table 12. Magnetics Selection Criteria ................................................................................................................................ 41
Table 13. Qualified Single Port 10/100 Magnetics............................................................................................................... 41
Table 14. 25MHz Crystal / Reference Clock Selection Criteria ........................................................................................... 42
Table 15. 50MHz Oscillator / Reference Clock Selection Criteria ....................................................................................... 42
August 2010
7 M9999-082710-1.0

7페이지


구       성 총 30 페이지수
다운로드[ KSZ8021RNL.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
KSZ8021RNL

10Base-T/100Base-TX PHY

Micrel Semiconductor
Micrel Semiconductor

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵