Datasheet.kr   

UMFT200XD 데이터시트 PDF




FTDI에서 제조한 전자 부품 UMFT200XD은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 UMFT200XD 자료 제공

부품번호 UMFT200XD 기능
기능 Breakout Modules
제조업체 FTDI
로고 FTDI 로고


UMFT200XD 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 11 페이지수

미리보기를 사용할 수 없습니다

UMFT200XD 데이터시트, 핀배열, 회로
UMFT200XD
Version 1.1
Document Reference No.: FT_000543 Clearance No.: FTDI# 274
Future Technology
Devices
International Ltd
Datasheet
UMFT200XD Breakout
Modules
UMFT200XD is a USB to I2C breakout module
1 Introduction
The UMFT200XD breakout module utilizes FTDI’s FT200XD IC to convert USB to an I2C.
1.1 Features
The UMFT200XD is a breakout board that converts USB2.0 Full-Speed to I2C. These modules do not have a
USB connector; instead the modules plug directly into the USB host connector and the pads of the PCB
makes electrical contact with the electrical contacts of the USB connector.
The I2C interface operates at +3.3V voltage levels, however all I/Os are 5V tolerant.
1.2 Ordering Information
Module
UMFT200XD
UMFT200XD-NC
Interface
I2C
I2C
Features
USB to I2C with four control bus lines, 3.3V power out limited to 50mA
and 5V with as safety fuse. I2C signals available via 8 pin female
connector.
USB to I2C with four control bus lines, 3.3V power out limited to 50mA
and 5V with as safety fuse. I2C signals available via 8 pads on the PCB
UMFT200XD-WE
I2C USB to I2C with four control bus lines, 3.3V power out limited to 50mA
and 5V with as safety fuse. I2C signals available via 8, 6” flying leads
connected to the PCB pads.
2 Driver Support
Royalty-Free VIRTUAL COM PORT (VCP)
DRIVERS for:
Windows 7 32,64-bit
Windows Vista
Windows XP 32,64-bit
Windows XP Embedded
Windows CE.NET 4.2 , 5.0 and 6.0
MAC OS OS-X
Linux 3.0 and greater
Android
Royalty-Free D2XX Direct Drivers (USB Drivers +
DLL S/W Interface):
Windows 7 32,64-bit
Windows Vista
Windows XP 32,64-bit
Windows XP Embedded
Windows CE.NET 4.2, 5.0 and 6.0
MAC OS OS-X
Linux 3.0and greater
Android
The drivers listed above are all available to download for free from www.ftdichip.com. Various 3rd Party
Drivers are also available for various other operating systems - visit www.ftdichip.com for details.
Use of FTDI devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees
to defend, indemnify and hold harmless FTDI from any and all damages, claims, suits or expense resulting
from such use.




UMFT200XD pdf, 반도체, 판매, 대치품
3.3 CBUS Signal Options
UMFT200XD
Version 1.1
Document Reference No.: FT_000543 Clearance No.: FTDI# 274
CBUS Signal
Option
Available On CBUS Pin
Description
Tristate
DRIVE_1
DRIVE_0
PWREN#
TXLED#
RXLED#
TX&RXLED#
SLEEP#
CLK24MHz
CLK12MHz
CLK6MHz
GPIO
BCD_Charger
CBUS0
CBUS0
CBUS0
CBUS0
CBUS0
CBUS0
CBUS0
CBUS0
CBUS0
CBUS0
CBUS0
CBUS0
CBUS0
IO Pad is tristated
Output a constant 1
Output a constant 0
Output is low after the device has been configured by USB, then
high during USB suspend mode. This output can be used to control
power to external logic P-Channel logic level MOSFET switch.
Internal drive configuration consists of an open drain to GND with
no pull-up, specially designed for battery charging applications.*
Transmit data LED drive pulses low when transmitting data via
USB.
Receive data LED drive pulses low when receiving data via USB.
LED drive pulses low when transmitting or receiving data via
USB.
Goes low during USB suspend mode. Typically used to power down
an external TTL to RS232 level converter IC in USB to RS232
converter designs.
24 MHz Clock output.**
12 MHz Clock output.**
6 MHz Clock output.**
CBUS bit bang mode option. A separate application note, AN232R-
01, available from FTDI website (www.ftdichip.com) describes in
more detail how to use CBUS bit bang mode.
Battery charge Detect, indicates when the device is connected to a
dedicated battery charger host. Active high output.
BCD_Charger#
CBUS0
Inverse of BCD Charger
BitBang_WR#
CBUS0
Synchronous and asynchronous bit bang mode WR# strobe output.
BitBang_RD#
CBUS0
Synchronous and asynchronous bit bang mode RD# strobe output.
I2C_TXE#
CBUS0
Transmit buffer empty, used to indicate to I2C master device
status of the FT200XD transmit buffer
I2C_RXF#
CBUS0
Receive buffer full, used to indicate to I2C master device status of
FT200XD receive buffer
VBUS_Sense
CBUS0
Input to detect when VBUS is present.
Time_Stamp
CBUS0
Toggle signal which changes state each time a USB SOF is received
Keep_Awake#
CBUS0
Table 3.3 CBUS Configuration Control
Active Low input, prevents the chip from going into suspend.
* PWREN# must be used with a 10kΩ resistor pull up.
**When in USB suspend mode the outputs clocks are also suspended.
4
Copyright © 2012 Future Technology Devices International Limited

4페이지










UMFT200XD 전자부품, 판매, 대치품
UMFT200XD
Version 1.1
Document Reference No.: FT_000543 Clearance No.: FTDI# 274
6 Module Circuit Schematic
6.1 UMFT200XD Schematic
Figure 6.1 UMFT200XD Circuit Schematic
7
Copyright © 2012 Future Technology Devices International Limited

7페이지


구       성 총 11 페이지수
다운로드[ UMFT200XD.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
UMFT200XD

Breakout Modules

FTDI
FTDI

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵