|
|
|
부품번호 | LISY300AL 기능 |
|
|
기능 | MEMS inertial sensor | ||
제조업체 | STMicroelectronics | ||
로고 | |||
전체 13 페이지수
LISY300AL
MEMS inertial sensor:
single-axis ±300°/s analog output yaw rate gyroscope
Features
■ 2.7 V to 3.6 V single supply operation
■ Low power consumption
■ Embedded power-down
■ ±300 °/s full scale
■ Absolute analog rate output
■ Integrated low-pass filters
■ Embedded self-test
■ High shock survivability
■ ECOPACK® RoHS and “Green” compliant
(see Section 4)
Description
The LISY300AL is a low-power single-axis yaw
rate sensor. It includes a sensing element and an
IC interface able to provide the measured angular
rate to the external world through an analog
output voltage.
The sensing element, capable of detecting the
yaw rate, is manufactured using a dedicated
micromachining process developed by ST to
produce inertial sensors and actuators on silicon
wafers.
The IC interface is manufactured using a CMOS
process that allows a high level of integration to
design a dedicated circuit which is trimmed to
better match the sensing element characteristics.
LGA-28 (7x7x1.5mm)
The LISY300AL has a full scale of ±300 °/s and is
capable of measuring rates with a -3 dB
bandwidth up to 88 Hz.
The LISY300AL is available in a plastic land grid
array (LGA) package and can operate within a
temperature range from -40 °C to +85 °C.
The LISY300AL belongs to a family of products
suitable for a variety of applications, including:
– Gaming and virtual reality input devices
– Motion control with MMI (man-machine
interface)
– Image stabilization for digital video and
digital still cameras
– GPS navigation systems
– Appliances and robotics
Table 1. Device summary
Order code
Temperature range (°C)
LISY300AL
LISY300ALTR
-40 to +85
-40 to +85
Package
LGA-28 (7x7x1.5)
LGA-28 (7x7x1.5)
Packing
Tray
Tape and reel
May 2008
Rev 1
1/13
www.st.com
13
Block diagram and pin description
LISY300AL
Table 2.
Pin #
1
2
3
4
5
6
7-9
10
11
12-13
14-15
16-21
22
23
24
25
26
27
28
Pin description
Pin Name
Function
NC
GND
GND
NC
CACT
ANALOG
OUTPUT
NC
PD
ST
Reserved
NC
Reserved
NC
VCONT
FILTVDD
Vdd
Vdd
Vdd
NC
Internally not connected
0V supply
0V supply
Internally not connected
Active filter capacitor
Rate signal output voltage
Internally not connected
Power-down (logic 0: normal mode; logic 1: power-down mode)
Self-test (logic 0: normal mode; logic 1: self-test)
Leave unconnected
Internally not connected
Leave unconnected
Internally not connected
PLL filter connection pad #1
PLL filter connection pad #2
Power supply
Power supply
Power supply
Internally not connected
4/13
4페이지 LISY300AL
Mechanical and electrical specifications
2.3
Absolute maximum ratings
Stresses above those listed as “Absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 5.
Symbol
Absolute maximum ratings
Ratings
Vdd Supply voltage
Vin Input voltage on any control pin (PD, ST)
AUNP Acceleration (not powered)
TSTG Storage temperature range
ESD Electrostatic discharge protection
Maximum value
-0.3 to 6
-0.3 to Vdd +0.3
3000 g for 0.5 ms
10000 g for 0.1 ms
-40 to +125
2 (HBM)
Unit
V
V
°C
kV
This is a mechanical shock sensitive device, improper handling can cause permanent
damage to the part
This is an ESD sensitive device, improper handling can cause permanent damage to
the part
7/13
7페이지 | |||
구 성 | 총 13 페이지수 | ||
다운로드 | [ LISY300AL.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
LISY300AL | MEMS inertial sensor | STMicroelectronics |
LISY300ALTR | MEMS inertial sensor | STMicroelectronics |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |