|
|
PDF RYB050I Data sheet ( Hoja de datos )
| Número de pieza | RYB050I | |
| Descripción | 2.4GHz BlueTooth Module | |
| Fabricantes | REYAX | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de RYB050I (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
REYAX
]
RYB050I 2.4GHz BlueTooth Module
UART_TX pin1
UART_RX pin2
PIO[11] pin34
RESETB pin11
VCC pin12
GND pin13
Function description
* Has a build-in 2.4GHz PCB antenna
* PIO control can be switched
* Has the standard HCI Port (UART or USB)
* The USB protocol is Full Speed USB1.1, and compliant with 2.0.
* This module can be used in the SMD.
* Bases at CSR BC417, Fully Qualified Bluetooth v2.0
* It is at the Bluetooth class 2 power level
*Has the function of adaptive frequency hopping.
* Low Cost
Application fields
* Bluetooth Car Handsfree Device
* Bluetooth GPS
* Bluetooth PCMCIA , USB Dongle
* Bluetooth Data Transfer
Software
* CSR Standard
Ordering Information
* 50 pieces chips in an anti-static blister package
1
1 page  
32 PIO[9]
33 PIO[10]
34 PIO[11]
Output
Bi-Directional
INPUT
Note: if PIN34 keep high level, all the
commands in the AT command set can be
in application. Otherwise, if just excite
PIN34 with high level but not keep, only
some command can be used.
Before paired, it output low level. Once
the pair is finished, it output high level.
Programmable input/output line
Mode switch input. If it is input low level,
the module is at paired or communication
mode. If it’s input high level, the module
will enter to AT mode. Even though the
module is at communication, the module
can enter to the AT mode if PIN34 is input
high level. Then it will go back to the
communication mode if PIN34 is input
low level again.
5
5 Page 
5. Get module Bluetooth address
Command
AT+ADDR?
Response
+ADDR: <Param> OK
Parameter
Param: Bluetooth address
Bluetooth address will show as this way: NAP: UAP: LAP(Hexadecimal)
Example:
Module Bluetooth address: 12: 34: 56: ab: cd: ef
at+addr?\r\n
+ADDR:1234:56:abcdef
OK
6. Set/ inquire device’s name
Command
Response
Parameter
AT+NAME=<Param>
AT+NAME?
OK
1. +NAME:<Param>
OK----success
Param: Bluetooth device name
2. FAIL----failure
Example:
AT+NAME=REYAX\r\n ---set the module device name: “REYAX”
OK
AT+NAME= “REYAX”\r\n ---set the module device name: “REYAX”
OK
at+name=TEST1\r\n
---set the module device name: “TEST1”
OK
at+name= “TEST1”\r\n ---set module device name : “TEST1”
OK
at+name?\r\n
+NAME: TEST1
OK
11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet RYB050I.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| RYB050I | 2.4GHz BlueTooth Module | REYAX |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |