|
|
Número de pieza | PR33MF51NSZF | |
Descripción | Triac output SSR | |
Fabricantes | Sharp | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de PR33MF51NSZF (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
No Preview Available ! PR33MF51NSZLF Series
PR33MF511NNSSZLFF IT(rms)≤0.3A, Non-Zero Cross type
DIP 8pin
Series
Triac output SSR
■ Description
PPRR333MF51NSLZF Series Solid State Relays (SSR)
are an integration of an infrared emitting diode (IRED),
a Phototriac Detector and a main output Triac. These
devices are ideally suited for controlling high voltage AC
loads with solid state reliability while providing 4kV isola-
tion (Viso(rms)) from input to output.
■ Features
1. Output current, IT(rms)≤0.3A
2. Non-zero crossing functionary
3. 8 pin DIP package (SMT gullwing also available)
4. High repetitive peak off-state voltage (VDRM : 600V)
5. Superior noise immunity (dV/dt : MIN. 100V/μs)
6. Response time, ton : MAX. 100μs
7. High isolation voltage between input and output
(Viso(rms) : 4kV)
8. RoHS directive compliant
■Agency approvals/Compliance
1. Recognized by UL508 file No. E94758 (as model No.
R33MF5)
2. Approved by CSA 22.2 No.14, file No. LR63705 (as
model No. R33MF5)
3. Optionary available VDE approved (DIN EN 60747-5-
2)(∗), file No. 40008898 (as model No. R33MF5)
4. Package resin : UL flammability grade (94V-0)
(∗) DIN EN60747-5-2 : successor standard of DIN VDE0884.
■ Applications
1. Isolated interface between high voltage AC devices
and lower voltage DC control circuitry.
2. Switching motors, fans, heaters, solenoids, and
valves.
3. Phase or power control in applications such as light-
ing and temperature control equipment.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Shheeeett NNoo..::DO4P-1A30031920E1FNEN
1 Date Sep. 1. 2006
© SHARP Corporation
1 page PR33MF51NSZLF Series
■ Model Line-up
Lead Form
Through-Hole
SMT Gullwing
Shipping
Sleeve
Taping
Package
50 pcs/sleeve
1 000 pcs/reel
DIN
EN60747-5-2
−
Approved
−
Approved
Model No. PR33MF51NSLZF PR33MF51YSLZF PR33MFF5511NNPIPLFF PPRR3333MMFF5511YYPIPLFF
VDRM
[V]
600
Please contact a local SHARP sales representative to inquire about production status.
Rank
mark
1
IFT[mA]
(VD=6V,
RL=100Ω)
MAX.10
Sheeeett NNoo..::OD4P-1A30031920E1FNEN
5
5 Page PR33MF51NSZLF Series
● Cleaning instructions
Solvent cleaning :
Solvent temperature should be 45˚C or below. Immersion time should be 3minutes or less.
Ultrasonic cleaning :
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Recommended solvent materials :
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol
In case the other type of solvent materials are intended to be used, please make sure they work fine in ac-
tual using conditions since some materials may erode the packaging resin.
● Presence of ODC
This product shall not contain the following materials.
And they are not used in the production process for this device.
Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBB and PBDE are not used in this product at all.
This product shall not contain the following materials banned in the RoHS Directive (2002/95/EC).
•Lead(*), Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated
diphenyl ethers (PBDE).
(*) High melting temperature type solders (i.e. tin-lead solder alloys containing more than 85% lead)
is exempted from the requirements.
Sheeeett NNoo..::OD4P-1A30031920E1FNEN
11
11 Page |
Páginas | Total 14 Páginas | |
PDF Descargar | [ Datasheet PR33MF51NSZF.PDF ] |
Número de pieza | Descripción | Fabricantes |
PR33MF51NSZF | Triac output SSR | Sharp |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |