|
|
PDF MDRIF140K Data sheet ( Hoja de datos )
| Número de pieza | MDRIF140K | |
| Descripción | Cordless Stereo Headphone | |
| Fabricantes | Sony | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MDRIF140K (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
3-248-366-176(1)
Cordless Stereo
Headphone
System
Operating Instructions
Mode d’emploi
Manual de instrucciones
GB
FR
ES
MDR-IF140K
©2003 Sony Corporation
1 page  
Table of contents
Getting started
Unpacking ........................................... 6
Inserting the battery .......................... 7
Setting up the transmitter ................. 8
Operating the system
Listening to a program .................... 10
The effective area of the
transmitter ..................................... 12
Replacing the ear pads .................... 12
Additional information
Specifications .................................... 13
Precautions ....................................... 14
Troubleshooting ............................... 14
5GB
5 Page 
4 Start playback of the
component connected to the
transmitter.
5 Adjust the volume.
If the infrared sensors are covered
by your hands when adjusting the
volume, the mute function will be
activated and volume may not be
adjusted. In this case, move nearer
toward the transmitter or orient the
infrared emitters on the left housing
towards the transmitter.
After listening to the programs
Take off the headphones, and then turn
off the power.
Note
You may hear some noise when you
disconnect the AC power adaptor from the
transmitter before taking off the headphones.
Sound is automatically muted if
noise increases
— Mute function
If the infrared rays are obstructed, or
the headphones are used outside their
effective range, noise will increase and
sound will become hard to hear. To
avoid potential ear damage as a result
of noise, this function mute any sound
from the headphones. Sound is
automatically restored when you move
nearer the transmitter or remove the
obstruction.
If no audio signal is input for
more than approximately 5
minutes
The transmitter turns off automatically.
Note
The brightness of the infrared emitters may
not be uniform, however, this is not a
malfunction.
Operating the system 11GB
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet MDRIF140K.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MDRIF140 | Cordless Stereo Headphone | Sony |
| MDRIF140K | Cordless Stereo Headphone | Sony |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |