Datasheet.kr   

NTC100K 데이터시트 PDF




Danfoss에서 제조한 전자 부품 NTC100K은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 NTC100K 자료 제공

부품번호 NTC100K 기능
기능 Temperature sensor
제조업체 Danfoss
로고 Danfoss 로고


NTC100K 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 4 페이지수

미리보기를 사용할 수 없습니다

NTC100K 데이터시트, 핀배열, 회로
Datablad
Data sheet
Temperature sensor NTC 100 K for solar heating controller SH-E01
Temperature sensor NTC 100 K for
solar heating controller SH-E01
General
Ordering
Technical data
Resistance value,
NTC 100K
Solar heating controller type SH-E01 uses
the differential temperature between two
temperature sensors to control the transfer of
heat energy from a Solar collector to a hot
water storage tank.
These temperature sensors are thermally
sensitive semiconductor resistors which show
a decrease in resistance as temperature
increases. In this application the sensors are
used in accordance with their zero-power
characteristics.
Sensor units consist of an NTC (negative
temperature coefficient) 100 K resistance
element which is then encapsulated in a
sealed Copper tube.
The sensor is adjusted to meet the tolerance
requirements of BS EN 60751.
Type
NTC 100K temperature sensor
Spare parts and accessories
Type
Sensor pocket, brass
Sensor pocket, brass
Heat conduction compound
Heat conduction compound
Temperature range Cable length
–40 to 200°C
3m
Ordering no.
088H2050
Description
Length 112 mm
Length 182 mm
5g
0.9 kg
Ordering no.
993N3568
993N3569
041E0110
041E0111
Sensor enclosure:
Rating:
Body:
Diameter:
Length:
IP 68 (totally sealed)
C105 Copper tube
8 mm
50 mm
Cable:
0.5 m of B-type PTFE wire 16/0.2 to BS 3G 210 with maximum temperature ratings of –75 to 260°C.
This is enclosed in Vidaflex S100, Class H (180°C) sleeving rated for short term temperatures up to
250°C at the sensor end.
Joined to 2.5 m of PVC cable rated for 105°C with 3.75 kV insulation.
Resistance –Temperature data for a
Siemens Masushita NTC thermister type:
B57550-G104-F2
R/T curve
R at 25°C
B (0/100)
Rx at 25°C
8404
100000 ohms
4036 |K|
100000 ohms
1%(+/-)
1%(+/-)
Tolerance of the NTC thermister:
+/- 1°C
+/- 2.5°C
+/- 3.5°C
greater than –40°C
greater than 90°C
greater than 150°C
and less than or equal to 90°C
and less than or equal to 150°C
and less than or equal to 200°C
VD.78.T1.02 © Danfoss 04/00
1




NTC100K pdf, 반도체, 판매, 대치품
Data sheet
Temperature sensor NTC 100 K for solar heating controller SH-E01
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to
products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
4 VD.78.T1.02 © Danfoss 04/00 Produced by Danfoss G1 advertising agency 00.04 FO-Bi.PS

4페이지












구       성 총 4 페이지수
다운로드[ NTC100K.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
NTC100D-9

NTC THERMISTOR

ETC
ETC
NTC100K

Temperature sensor

Danfoss
Danfoss

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵