|
|
PDF AUIRFB4410 Data sheet ( Hoja de datos )
| Número de pieza | AUIRFB4410 | |
| Descripción | Power MOSFETs | |
| Fabricantes | International Rectifier | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AUIRFB4410 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
Features
● Advanced Process Technology
● Ultra Low On-Resistance
● Dynamic dV/dT Rating
● 175°C Operating Temperature
● Fast Switching
● Repetitive Avalanche Allowed up to
Tjmax
● Lead-Free, RoHS Compliant
● Automotive Qualified *
AUTOMOTIVE GRADE
D
G
S
PD - 97598
AUIRFB4410
HEXFET® Power MOSFET
VDSS
RDS(on) typ.
max.
ID (Silicon Limited)
ID (Package Limited)
100V
8.0mΩ
10mΩ
88A
75A
Description
Specifically designed for Automotive applications, this HEXFET®
Power MOSFET utilizes the latest processing techniques to achieve
extremely low on-resistance per silicon area. Additional features of
this design are a 175°C junction operating temperature, fast switching
speed and improved repetitive avalanche rating . These features
combine to make this design an extremely efficient and reliable
device for use in Automotive applications and a wide variety of other
applications.
G
Gate
GDS
TO-220AB
AUIRFB4410
D
Drain
S
Source
Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only; and
functional operation of the device at these or any other condition beyond those indicated in the specifications is not implied. Exposure to absolute-
maximum-rated conditions for extended periods may affect device reliability. The thermal resistance and power dissipation ratings are measured under
board mounted and still air conditions. Ambient temperature (TA) is 25°C, unless otherwise specified.
Symbol
ID @ TC = 25°C
ID @ TC = 100°C
ID @ TC = 25°C
IDM
PD @TC = 25°C
Parameter
Continuous Drain Current, VGS @ 10V (Silicon Limited)
Continuous Drain Current, VGS @ 10V
Continuous Drain Current, VGS @ 10V (Package Limited)
dPulsed Drain Current
Maximum Power Dissipation
Max.
88
63
75
380
200
Units
A
W
Linear Derating Factor
1.3 W/°C
VGS
dv/dt
Gate-to-Source Voltage
fPeak Diode Recovery
± 20
19
V
V/ns
TJ
TSTG
Operating Junction and
Storage Temperature Range
-55 to + 175
°C
Soldering Temperature, for 10 seconds
300
(1.6mm from case)
Mounting torque, 6-32 or M3 screw
x x10lb in (1.1N m)
Avalanche Characteristics
EAS (Thermally limited)
IAR
EAR
eSingle Pulse Avalanche Energy
ÃAvalanche Current
gRepetitive Avalanche Energy
Thermal Resistance
Symbol
RθJC
Parameter
jJunction-to-Case
RθCS
Case-to-Sink, Flat Greased Surface
RθJA Junction-to-Ambient
220
See Fig. 14, 15, 16a, 16b
Typ.
–––
0.50
–––
Max.
0.61
–––
62
mJ
A
mJ
Units
°C/W
HEXFET® is a registered trademark of International Rectifier.
*Qualification standards can be found at http://www.irf.com/
www.irf.com
1
11/23/2010
1 page  
1000
100
TJ = 175°C
10
TJ = 25°C
VGS = 0V
1
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
VSD, Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode Forward Voltage
100
Limited By Package
75
50
25
0
25 50 75 100 125 150 175
TC , Case Temperature (°C)
Fig 9. Maximum Drain Current vs. Case Temperature
2.0
1.5
1.0
0.5
0.0
0
20 40 60 80 100 120
VDS, Drain-to-Source Voltage (V)
Fig 11. Typical COSS Stored Energy
www.irf.com
AUIRFB4410
1000
100
OPERATION IN THIS AREA
LIMITED BY R DS(on)
100µsec
1msec
10msec
10 DC
Tc = 25°C
Tj = 175°C
Single Pulse
1
01
10
100 1000
VDS, Drain-to-Source Voltage (V)
Fig 8. Maximum Safe Operating Area
130
125
120
115
110
105
100
-60 -40 -20 0 20 40 60 80 100 120 140 160 180
TJ , Temperature ( °C )
Fig 10. Drain-to-Source Breakdown Voltage
900
800
TOP
ID
6.7A
700 9.7A
BOTTOM 58A
600
500
400
300
200
100
0
25 50 75 100 125 150 175
Starting TJ , Junction Temperature (°C)
Fig 12. Maximum Avalanche Energy vs. DrainCurrent
5
5 Page 
AUIRFB4410
IMPORTANT NOTICE
Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR) reserve the right to make
corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any
product or services without notice. Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific requirements
with regards to product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied
at the time of order acknowledgment.
IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s standard warranty.
Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by
government requirements, testing of all parameters of each product is not necessarily performed.
IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using
IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating
safeguards.
Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all
associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business
practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.
Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express
and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable
for any such statements.
IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where
personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall
indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs,
damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with
such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product.
IR products are neither designed nor intended for use in military/aerospace applications or environments unless the IR products are specifically
designated by IR as military-grade or “enhanced plastic.” Only products designated by IR as military-grade meet military specifications. Buyers
acknowledge and agree that any such use of IR products which IR has not designated as military-grade is solely at the Buyer’s risk, and that they
are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated
by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”. Buyers acknowledge and agree that,
if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements.
www.irf.com
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
233 Kansas St., El Segundo, California 90245
Tel: (310) 252-7105
11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet AUIRFB4410.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AUIRFB4410 | Power MOSFETs | International Rectifier |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |